[PATCH] ARM: DTS: imx53: Add support for imx53 HSC/DDC boards from K+P

From: Lukasz Majewski
Date: Wed May 09 2018 - 11:35:18 EST

This commit provides support for HSC and DDC boards from
Kieback&Peter GmbH vendor.

Signed-off-by: Lukasz Majewski <lukma@xxxxxxx>
---
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/imx53-kp-ddc.dts | 146 ++++++++++++++++++++++++++++
arch/arm/boot/dts/imx53-kp-hsc.dts | 53 ++++++++++
arch/arm/boot/dts/imx53-kp.dtsi | 191 +++++++++++++++++++++++++++++++++++++
4 files changed, 392 insertions(+)
create mode 100644 arch/arm/boot/dts/imx53-kp-ddc.dts
create mode 100644 arch/arm/boot/dts/imx53-kp-hsc.dts
create mode 100644 arch/arm/boot/dts/imx53-kp.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index fbc04b0db781..00854a5b6ac4 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -360,6 +360,8 @@ dtb-$(CONFIG_SOC_IMX51) += \
dtb-$(CONFIG_SOC_IMX53) += \
imx53-ard.dtb \
imx53-cx9020.dtb \
+ imx53-kp-ddc.dtb \
+ imx53-kp-hsc.dtb \
imx53-m53evk.dtb \
imx53-mba53.dtb \
imx53-ppd.dtb \
diff --git a/arch/arm/boot/dts/imx53-kp-ddc.dts b/arch/arm/boot/dts/imx53-kp-ddc.dts
new file mode 100644
index 000000000000..acaf477a52c5
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-kp-ddc.dts
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@xxxxxxx
+ */
+
+/dts-v1/;
+#include "imx53-kp.dtsi"
+
+/ {
+ model = "K+P imx53 DDC";
+ compatible = "kiebackpeter,imx53-ddc", "fsl,imx53";
+
+ backlight_lcd: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm2 0 50000>;
+ power-supply = <&reg_backlight>;
+ brightness-levels = <0 24 28 32 36
+ 40 44 48 52 56
+ 60 64 68 72 76
+ 80 84 88 92 96 100>;
+ default-brightness-level = <20>;
+ };
+
+ lcd_display: disp1 {
+ compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interface-pix-fmt = "rgb24";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_disp>;
+
+ port@0 {
+ reg = <0>;
+
+ display1_in: endpoint {
+ remote-endpoint = <&ipu_di1_disp1>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lcd_display_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+ };
+
+ lcd_panel: lcd-panel {
+ compatible = "koe,tx14d24vm1bpa";
+ backlight = <&backlight_lcd>;
+ power-supply = <&reg_3v3>;
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
+
+ reg_backlight: regulator-backlight {
+ compatible = "regulator-fixed";
+ regulator-name = "backlight-supply";
+ regulator-min-microvolt = <15000000>;
+ regulator-max-microvolt = <15000000>;
+ regulator-always-on;
+ };
+};
+
+&i2c3 {
+ adc@48 {
+ compatible = "ti,ads1015";
+ reg = <0x48>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@4 {
+ reg = <4>;
+ ti,gain = <2>;
+ ti,datarate = <4>;
+ };
+
+ channel@6 {
+ reg = <6>;
+ ti,gain = <2>;
+ ti,datarate = <4>;
+ };
+ };
+
+ gpio_expander2@21 {
+ compatible = "nxp,pcf8574";
+ reg = <0x21>;
+ interrupts = <109>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&iomuxc {
+ imx53-kp-ddc {
+ pinctrl_disp: dispgrp {
+ fsl,pins = <
+ MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x4
+ MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x4
+ MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x4
+ MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x4
+ MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x4
+ MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x4
+ MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x4
+ MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x4
+ MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x4
+ MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x4
+ MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x4
+ MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x4
+ MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x4
+ MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x4
+ MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x4
+ MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x4
+ MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x4
+ MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x4
+ MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x4
+ MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x4
+ MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x4
+ MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x4
+ MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x4
+ MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x4
+ MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x4
+ MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x4
+ MX53_PAD_GPIO_1__PWM2_PWMO 0x4
+ >;
+ };
+ };
+};
+
+&ipu_di1_disp1 {
+ remote-endpoint = <&display1_in>;
+};
+
+&fec {
+ status = "okay";
+};
+
+&pmic {
+ fsl,mc13xxx-uses-touch;
+};
diff --git a/arch/arm/boot/dts/imx53-kp-hsc.dts b/arch/arm/boot/dts/imx53-kp-hsc.dts
new file mode 100644
index 000000000000..fff358395c9d
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-kp-hsc.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@xxxxxxx
+ */
+
+/dts-v1/;
+#include "imx53-kp.dtsi"
+
+/ {
+ model = "K+P imx53 HSC";
+ compatible = "kiebackpeter,imx53-hsc", "fsl,imx53";
+
+};
+
+&fec {
+ status = "okay";
+
+ fixed-link { /* RMII fixed link to LAN9303 */
+ speed = <100>;
+ full-duplex;
+ };
+};
+
+&i2c3 {
+ switch: switch@a {
+ compatible = "smsc,lan9303-i2c";
+ reg = <0xa>;
+ reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+ reset-duration = <400>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 { /* RMII fixed link to master */
+ reg = <0>;
+ label = "cpu";
+ ethernet = <&fec>;
+ };
+
+ port@1 { /* external port 1 */
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 { /* external port 2 */
+ reg = <2>;
+ label = "lan2";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx53-kp.dtsi b/arch/arm/boot/dts/imx53-kp.dtsi
new file mode 100644
index 000000000000..86bea3217f18
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-kp.dtsi
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@xxxxxxx
+ */
+
+/dts-v1/;
+#include "imx53-tqma53.dtsi"
+
+/ {
+ buzzer {
+ compatible = "pwm-beeper";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_buzzer>;
+
+ pwms = <&pwm1 0 500000>;
+ };
+
+ gpio_buttons {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiobuttons>;
+
+ button@1 {
+ label = "Kaltstart";
+ linux,code = <64>; /* KEY_F6 */
+ gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+ };
+ button@2 {
+ label = "PowerFailInterrupt";
+ linux,code = <65>; /* KEY_F7 */
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+
+ led_bus {
+ label = "bus";
+ gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "gpio";
+ default-state = "off";
+ };
+
+ led_error {
+ label = "error";
+ gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "gpio";
+ default-state = "off";
+ };
+
+ led_flash {
+ label = "flash";
+ gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+};
+
+&can1 {
+ status = "okay";
+};
+
+&can2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+
+ gpio_expander1@22 {
+ compatible = "nxp,pcf8574";
+ reg = <0x22>;
+ interrupts = <109>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_kp_common>;
+
+ imx53-kp-common {
+ pinctrl_buzzer: buzzergrp {
+ fsl,pins = <
+ MX53_PAD_SD1_DATA3__PWM1_PWMO 0x1e4
+ >;
+ };
+
+ pinctrl_gpiobuttons: gpiobuttonsgrp {
+ fsl,pins = <
+ MX53_PAD_EIM_RW__GPIO2_26 0x1e4
+ MX53_PAD_EIM_D22__GPIO3_22 0x1e4
+ >;
+ };
+
+ pinctrl_kp_common: kpcommongrp {
+ fsl,pins = <
+ MX53_PAD_EIM_CS0__GPIO2_23 0x1e4
+ MX53_PAD_GPIO_19__GPIO4_5 0x1e4
+ MX53_PAD_PATA_DATA6__GPIO2_6 0x1e4
+ MX53_PAD_PATA_DATA7__GPIO2_7 0xe0
+ MX53_PAD_CSI0_DAT14__GPIO6_0 0x1e4
+ MX53_PAD_CSI0_DAT16__GPIO6_2 0x1e4
+ MX53_PAD_CSI0_DAT18__GPIO6_4 0x1e4
+ MX53_PAD_EIM_D17__GPIO3_17 0x1e4
+ MX53_PAD_EIM_D18__GPIO3_18 0x1e4
+ MX53_PAD_EIM_D21__GPIO3_21 0x1e4
+ MX53_PAD_EIM_D29__GPIO3_29 0x1e4
+ MX53_PAD_EIM_DA11__GPIO3_11 0x1e4
+ MX53_PAD_EIM_DA13__GPIO3_13 0x1e4
+ MX53_PAD_EIM_DA14__GPIO3_14 0x1e4
+ MX53_PAD_SD1_DATA0__GPIO1_16 0x1e4
+ MX53_PAD_SD1_CMD__GPIO1_18 0x1e4
+ MX53_PAD_SD1_CLK__GPIO1_20 0x1e4
+ >;
+ };
+
+ pinctrl_leds: ledgrp {
+ fsl,pins = <
+ MX53_PAD_EIM_EB2__GPIO2_30 0x1d4
+ MX53_PAD_EIM_D28__GPIO3_28 0x1d4
+ MX53_PAD_EIM_WAIT__GPIO5_0 0x1d4
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX53_PAD_CSI0_DAT12__UART4_TXD_MUX 0x1e4
+ MX53_PAD_CSI0_DAT13__UART4_RXD_MUX 0x1e4
+ >;
+ };
+ };
+};
+
+&pinctrl_uart1 {
+ fsl,pins = <
+ MX53_PAD_EIM_D23__GPIO3_23 0x1e4
+ MX53_PAD_EIM_EB3__GPIO2_31 0x1e4
+ MX53_PAD_EIM_D24__GPIO3_24 0x1e4
+ MX53_PAD_EIM_D25__GPIO3_25 0x1e4
+ MX53_PAD_EIM_D19__GPIO3_19 0x1e4
+ MX53_PAD_EIM_D20__GPIO3_20 0x1e4
+ >;
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usbphy0 {
+ status = "disabled";
+};
--
2.11.0