Re: [PATCH v2 1/2] dt-bindings: leds: Add SC27xx breathing light controller documentation

[Baolin Wang]

Hi Pavel,

On 9 May 2018 at 22:25, Pavel Machek <pavel@xxxxxx> wrote:
> Hi!
>
>> This patch adds the binding documentation for Spreadtrum SC27xx series
>> breathing light controller, which supports 3 outputs: red LED, green
>> LED and blue LED.
>>
>> Signed-off-by: Baolin Wang <baolin.wang@xxxxxxxxxx>
>> ---
>> Changes since v1:
>>  - Change the compatible string to be one explicit SoC name.
>>  - Change the child node name.
>>  - Change to be upper case for the first character.
>> ---
>>  .../devicetree/bindings/leds/leds-sc27xx-bltc.txt  |   41 ++++++++++++++++++++
>>  1 file changed, 41 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt
>>
>> diff --git a/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt b/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt
>> new file mode 100644
>> index 0000000..b3de7fc
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt
>> @@ -0,0 +1,41 @@
>> +LEDs connected to Spreadtrum SC27XX PMIC breathing light controller
>> +
>> +The SC27xx breathing light controller supports to 3 outputs:
>> +red LED, green LED and blue LED. Each LED can work at normal
>> +PWM mode or breath light mode.
>
>> +Required properties:
>> +- compatible: Should be "sprd,sc2731-bltc".
>
> If this is for 2731, I'd say so in the title and the filename...?

I agree with Jacek's comments. We will add other PMICs belonging to
sc27xx series in future.

>
>> +- #address-cells: Must be 1.
>> +- #size-cells: Must be 0.
>> +- reg: Specify controller address.
>
> the controller...

Will fix.

>
>> +Required child properties:
>> +- reg: Number of LED line (could be from 0 to 2).
>
> Uff. "Port this LED is connected to"?

Will fix.

>
> With that fixed...
>
> Acked-by: Pavel Machek <pavel@xxxxxx>

Thanks for your comments.

-- 
Baolin.wang
Best Regards