[PATCH -resend 22/27] x86_64: assembly, change all ENTRY+END to SYM_CODE_*

From: Jiri Slaby
Date: Thu May 10 2018 - 04:09:59 EST

Next message: Jiri Slaby: "[PATCH -resend 21/27] x86_64: assembly, add ENDs to some functions and relabel with SYM_CODE_*"
Previous message: Jiri Slaby: "[PATCH -resend 03/27] x86: assembly, annotate relocate_kernel"
In reply to: Jiri Slaby: "[PATCH -resend 03/27] x86: assembly, annotate relocate_kernel"
Next in thread: Jiri Slaby: "[PATCH -resend 21/27] x86_64: assembly, add ENDs to some functions and relabel with SYM_CODE_*"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Here, we change all code which is not marked as functions. In other
words, this code has been using END, not ENDPROC. So switch all of this
to appropriate new markings SYM_CODE_START and SYM_CODE_END.

Signed-off-by: Jiri Slaby <jslaby@xxxxxxx>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@xxxxxxxxxx> [xen bits]
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Ingo Molnar <mingo@xxxxxxxxxx>
Cc: "H. Peter Anvin" <hpa@xxxxxxxxx>
Cc: x86@xxxxxxxxxx
Cc: Boris Ostrovsky <boris.ostrovsky@xxxxxxxxxx>
Cc: Juergen Gross <jgross@xxxxxxxx>
Cc: xen-devel@xxxxxxxxxxxxxxxxxxxx
---
arch/x86/entry/entry_64.S | 56 ++++++++++++++++++++--------------------
arch/x86/entry/entry_64_compat.S | 8 +++---
arch/x86/kernel/ftrace_64.S | 4 +--
arch/x86/xen/xen-asm_64.S | 8 +++---
arch/x86/xen/xen-head.S | 8 +++---
5 files changed, 42 insertions(+), 42 deletions(-)

diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index c6841c038170..1b0631971dde 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -46,11 +46,11 @@
.section .entry.text, "ax"

#ifdef CONFIG_PARAVIRT
-ENTRY(native_usergs_sysret64)
+SYM_CODE_START(native_usergs_sysret64)
UNWIND_HINT_EMPTY
swapgs
sysretq
-END(native_usergs_sysret64)
+SYM_CODE_END(native_usergs_sysret64)
#endif /* CONFIG_PARAVIRT */

.macro TRACE_IRQS_FLAGS flags:req
@@ -163,7 +163,7 @@ END(native_usergs_sysret64)
#define RSP_SCRATCH CPU_ENTRY_AREA_entry_stack + \
SIZEOF_entry_stack - 8 + CPU_ENTRY_AREA

-ENTRY(entry_SYSCALL_64_trampoline)
+SYM_CODE_START(entry_SYSCALL_64_trampoline)
UNWIND_HINT_EMPTY
swapgs

@@ -193,17 +193,17 @@ ENTRY(entry_SYSCALL_64_trampoline)
pushq %rdi
movq $entry_SYSCALL_64_stage2, %rdi
JMP_NOSPEC %rdi
-END(entry_SYSCALL_64_trampoline)
+SYM_CODE_END(entry_SYSCALL_64_trampoline)

.popsection

-ENTRY(entry_SYSCALL_64_stage2)
+SYM_CODE_START(entry_SYSCALL_64_stage2)
UNWIND_HINT_EMPTY
popq %rdi
jmp entry_SYSCALL_64_after_hwframe
-END(entry_SYSCALL_64_stage2)
+SYM_CODE_END(entry_SYSCALL_64_stage2)

-ENTRY(entry_SYSCALL_64)
+SYM_CODE_START(entry_SYSCALL_64)
UNWIND_HINT_EMPTY
/*
* Interrupts are off on entry.
@@ -336,13 +336,13 @@ syscall_return_via_sysret:
popq %rdi
popq %rsp
USERGS_SYSRET64
-END(entry_SYSCALL_64)
+SYM_CODE_END(entry_SYSCALL_64)

/*
* %rdi: prev task
* %rsi: next task
*/
-ENTRY(__switch_to_asm)
+SYM_CODE_START(__switch_to_asm)
UNWIND_HINT_FUNC
/*
* Save callee-saved registers
@@ -384,7 +384,7 @@ ENTRY(__switch_to_asm)
popq %rbp

jmp __switch_to
-END(__switch_to_asm)
+SYM_CODE_END(__switch_to_asm)

/*
* A newly forked process directly context switches into this address.
@@ -393,7 +393,7 @@ END(__switch_to_asm)
* rbx: kernel thread func (NULL for user thread)
* r12: kernel thread arg
*/
-ENTRY(ret_from_fork)
+SYM_CODE_START(ret_from_fork)
UNWIND_HINT_EMPTY
movq %rax, %rdi
call schedule_tail /* rdi: 'prev' task parameter */
@@ -419,14 +419,14 @@ ENTRY(ret_from_fork)
*/
movq $0, RAX(%rsp)
jmp 2b
-END(ret_from_fork)
+SYM_CODE_END(ret_from_fork)

/*
* Build the entry stubs with some assembler magic.
* We pack 1 stub into every 8-byte block.
*/
.align 8
-ENTRY(irq_entries_start)
+SYM_CODE_START(irq_entries_start)
vector=FIRST_EXTERNAL_VECTOR
.rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR)
UNWIND_HINT_IRET_REGS
@@ -435,7 +435,7 @@ ENTRY(irq_entries_start)
.align 8
vector=vector+1
.endr
-END(irq_entries_start)
+SYM_CODE_END(irq_entries_start)

.macro DEBUG_ENTRY_ASSERT_IRQS_OFF
#ifdef CONFIG_DEBUG_ENTRY
@@ -561,7 +561,7 @@ END(irq_entries_start)
* | return address |
* +----------------------------------------------------+
*/
-ENTRY(interrupt_entry)
+SYM_CODE_START(interrupt_entry)
UNWIND_HINT_FUNC
ASM_CLAC
cld
@@ -627,7 +627,7 @@ ENTRY(interrupt_entry)
TRACE_IRQS_OFF

ret
-END(interrupt_entry)
+SYM_CODE_END(interrupt_entry)

/* Interrupt entry/exit. */
@@ -832,7 +832,7 @@ SYM_CODE_END(common_interrupt)
* APIC interrupts.
*/
.macro apicinterrupt3 num sym do_sym
-ENTRY(\sym)
+SYM_CODE_START(\sym)
UNWIND_HINT_IRET_REGS
pushq $~(\num)
.Lcommon_\sym:
@@ -840,7 +840,7 @@ ENTRY(\sym)
UNWIND_HINT_REGS indirect=1
call \do_sym /* rdi points to pt_regs */
jmp ret_from_intr
-END(\sym)
+SYM_CODE_END(\sym)
.endm

/* Make sure APIC interrupt handlers end up in the irqentry section: */
@@ -902,7 +902,7 @@ apicinterrupt IRQ_WORK_VECTOR irq_work_interrupt smp_irq_work_interrupt
#define CPU_TSS_IST(x) PER_CPU_VAR(cpu_tss_rw) + (TSS_ist + ((x) - 1) * 8)

.macro idtentry sym do_sym has_error_code:req paranoid=0 shift_ist=-1
-ENTRY(\sym)
+SYM_CODE_START(\sym)
UNWIND_HINT_IRET_REGS offset=\has_error_code*8

/* Sanity check */
@@ -985,7 +985,7 @@ ENTRY(\sym)

jmp error_exit /* %ebx: no swapgs flag */
.endif
-END(\sym)
+SYM_CODE_END(\sym)
.endm

idtentry divide_error do_divide_error has_error_code=0
@@ -1102,7 +1102,7 @@ SYM_CODE_END(xen_do_hypervisor_callback)
* We distinguish between categories by comparing each saved segment register
* with its current contents: any discrepancy means we in category 1.
*/
-ENTRY(xen_failsafe_callback)
+SYM_CODE_START(xen_failsafe_callback)
UNWIND_HINT_EMPTY
movl %ds, %ecx
cmpw %cx, 0x10(%rsp)
@@ -1132,7 +1132,7 @@ ENTRY(xen_failsafe_callback)
PUSH_AND_CLEAR_REGS
ENCODE_FRAME_POINTER
jmp error_exit
-END(xen_failsafe_callback)
+SYM_CODE_END(xen_failsafe_callback)

apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \
xen_hvm_callback_vector xen_evtchn_do_upcall
@@ -1340,7 +1340,7 @@ SYM_CODE_END(error_exit)
* %r14: Used to save/restore the CR3 of the interrupted context
* when PAGE_TABLE_ISOLATION is in use. Do not clobber.
*/
-ENTRY(nmi)
+SYM_CODE_START(nmi)
UNWIND_HINT_IRET_REGS

/*
@@ -1673,15 +1673,15 @@ nmi_restore:
* about espfix64 on the way back to kernel mode.
*/
iretq
-END(nmi)
+SYM_CODE_END(nmi)

-ENTRY(ignore_sysret)
+SYM_CODE_START(ignore_sysret)
UNWIND_HINT_EMPTY
mov $-ENOSYS, %eax
sysret
-END(ignore_sysret)
+SYM_CODE_END(ignore_sysret)

-ENTRY(rewind_stack_do_exit)
+SYM_CODE_START(rewind_stack_do_exit)
UNWIND_HINT_FUNC
/* Prevent any naive code from trying to unwind to our caller. */
xorl %ebp, %ebp
@@ -1691,4 +1691,4 @@ ENTRY(rewind_stack_do_exit)
UNWIND_HINT_FUNC sp_offset=PTREGS_SIZE

call do_exit
-END(rewind_stack_do_exit)
+SYM_CODE_END(rewind_stack_do_exit)
diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S
index 076659472d40..b4a2ee901899 100644
--- a/arch/x86/entry/entry_64_compat.S
+++ b/arch/x86/entry/entry_64_compat.S
@@ -196,7 +196,7 @@ ENDPROC(entry_SYSENTER_compat)
* esp user stack
* 0(%esp) arg6
*/
-ENTRY(entry_SYSCALL_compat)
+SYM_CODE_START(entry_SYSCALL_compat)
/* Interrupts are off on entry. */
swapgs

@@ -311,7 +311,7 @@ sysret32_from_system_call:
xorl %r10d, %r10d
swapgs
sysretl
-END(entry_SYSCALL_compat)
+SYM_CODE_END(entry_SYSCALL_compat)

/*
* 32-bit legacy system call entry.
@@ -339,7 +339,7 @@ END(entry_SYSCALL_compat)
* edi arg5
* ebp arg6
*/
-ENTRY(entry_INT80_compat)
+SYM_CODE_START(entry_INT80_compat)
/*
* Interrupts are off on entry.
*/
@@ -414,4 +414,4 @@ ENTRY(entry_INT80_compat)
/* Go back to user mode. */
TRACE_IRQS_ON
jmp swapgs_restore_regs_and_return_to_usermode
-END(entry_INT80_compat)
+SYM_CODE_END(entry_INT80_compat)
diff --git a/arch/x86/kernel/ftrace_64.S b/arch/x86/kernel/ftrace_64.S
index b50fbb405763..141341eaa267 100644
--- a/arch/x86/kernel/ftrace_64.S
+++ b/arch/x86/kernel/ftrace_64.S
@@ -319,7 +319,7 @@ ENTRY(ftrace_graph_caller)
retq
ENDPROC(ftrace_graph_caller)

-ENTRY(return_to_handler)
+SYM_CODE_START(return_to_handler)
UNWIND_HINT_EMPTY
subq $24, %rsp

@@ -335,5 +335,5 @@ ENTRY(return_to_handler)
movq (%rsp), %rax
addq $24, %rsp
JMP_NOSPEC %rdi
-END(return_to_handler)
+SYM_CODE_END(return_to_handler)
#endif
diff --git a/arch/x86/xen/xen-asm_64.S b/arch/x86/xen/xen-asm_64.S
index a69a171f7cea..5a3f5c18cd0c 100644
--- a/arch/x86/xen/xen-asm_64.S
+++ b/arch/x86/xen/xen-asm_64.S
@@ -19,11 +19,11 @@
#include <linux/linkage.h>

.macro xen_pv_trap name
-ENTRY(xen_\name)
+SYM_CODE_START(xen_\name)
pop %rcx
pop %r11
jmp \name
-END(xen_\name)
+SYM_CODE_END(xen_\name)
.endm

xen_pv_trap divide_error
@@ -56,7 +56,7 @@ xen_pv_trap entry_INT80_compat
xen_pv_trap hypervisor_callback

__INIT
-ENTRY(xen_early_idt_handler_array)
+SYM_CODE_START(xen_early_idt_handler_array)
i = 0
.rept NUM_EXCEPTION_VECTORS
pop %rcx
@@ -65,7 +65,7 @@ ENTRY(xen_early_idt_handler_array)
i = i + 1
.fill xen_early_idt_handler_array + i*XEN_EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc
.endr
-END(xen_early_idt_handler_array)
+SYM_CODE_END(xen_early_idt_handler_array)
__FINIT

hypercall_iret = hypercall_page + __HYPERVISOR_iret * 32
diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S
index 5077ead5e59c..32606eeec053 100644
--- a/arch/x86/xen/xen-head.S
+++ b/arch/x86/xen/xen-head.S
@@ -22,7 +22,7 @@

#ifdef CONFIG_XEN_PV
__INIT
-ENTRY(startup_xen)
+SYM_CODE_START(startup_xen)
UNWIND_HINT_EMPTY
cld

@@ -52,13 +52,13 @@ ENTRY(startup_xen)
#endif

jmp xen_start_kernel
-END(startup_xen)
+SYM_CODE_END(startup_xen)
__FINIT
#endif

.pushsection .text
.balign PAGE_SIZE
-ENTRY(hypercall_page)
+SYM_CODE_START(hypercall_page)
.rept (PAGE_SIZE / 32)
UNWIND_HINT_EMPTY
.skip 32
@@ -69,7 +69,7 @@ ENTRY(hypercall_page)
.type xen_hypercall_##n, @function; .size xen_hypercall_##n, 32
#include <asm/xen-hypercalls.h>
#undef HYPERCALL
-END(hypercall_page)
+SYM_CODE_END(hypercall_page)
.popsection

ELFNOTE(Xen, XEN_ELFNOTE_GUEST_OS, .asciz "linux")
--
2.16.3

Next message: Jiri Slaby: "[PATCH -resend 21/27] x86_64: assembly, add ENDs to some functions and relabel with SYM_CODE_*"
Previous message: Jiri Slaby: "[PATCH -resend 03/27] x86: assembly, annotate relocate_kernel"
In reply to: Jiri Slaby: "[PATCH -resend 03/27] x86: assembly, annotate relocate_kernel"
Next in thread: Jiri Slaby: "[PATCH -resend 21/27] x86_64: assembly, add ENDs to some functions and relabel with SYM_CODE_*"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]