Re: [PATCH v4 2/2] leds: lm3601x: Introduce the lm3601x LED driver

From: Dan Murphy
Date: Thu May 10 2018 - 10:04:33 EST

Andrew

Thanks for the re-review

On 05/10/2018 08:44 AM, Andrew F. Davis wrote:
> On 05/10/2018 07:27 AM, Dan Murphy wrote:
>> Introduce the family of LED devices that can
>> drive a torch, strobe or IR LED.
>>
>> The LED driver can be configured with a strobe
>> timer to execute a strobe flash. The IR LED
>> brightness is controlled via the torch brightness
>> register.
>>
>> The data sheet for each the LM36010 and LM36011
>> LED drivers can be found here:
>> http://www.ti.com/product/LM36010
>> http://www.ti.com/product/LM36011
>>
>> Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
>> ---
>>
>> v4 - Fixed Cocci issue using ARRAY_SIZE - https://patchwork.kernel.org/patch/10389259/
>>
>> v3 - removed wildcard dt compatible, fixed copyright, fixed struct doc, removed
>> RO registers from default, added regmap volatile for FLAGS_REG, updated regmap cache type,
>> fixed unlock and extra semi colon in strobe_set, removed unnecessary out label
>> in led register and fixed checking of the ret in brightness_set - https://patchwork.kernel.org/patch/10386243/
>> v2 - Fixed kbuild issue and removed unused cdev_strobe - https://patchwork.kernel.org/patch/10384585/
>>
>> drivers/leds/Kconfig | 9 +
>> drivers/leds/Makefile | 1 +
>> drivers/leds/leds-lm3601x.c | 611 ++++++++++++++++++++++++++++++++++++
>> 3 files changed, 621 insertions(+)
>> create mode 100644 drivers/leds/leds-lm3601x.c
>>
>> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
>> index 2c896c0e69e1..50ae536f343f 100644
>> --- a/drivers/leds/Kconfig
>> +++ b/drivers/leds/Kconfig
>> @@ -145,6 +145,15 @@ config LEDS_LM3692X
>> This option enables support for the TI LM3692x family
>> of white LED string drivers used for backlighting.
>>
>> +config LEDS_LM3601X
>> + tristate "LED support for LM3601x Chips"
>> + depends on LEDS_CLASS && I2C && OF
>> + depends on LEDS_CLASS_FLASH
>> + select REGMAP_I2C
>> + help
>> + This option enables support for the TI LM3601x family
>> + of flash, torch and indicator classes.
>> +
>> config LEDS_LOCOMO
>> tristate "LED Support for Locomo device"
>> depends on LEDS_CLASS
>> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
>> index 91eca81cae82..b79807fe1b67 100644
>> --- a/drivers/leds/Makefile
>> +++ b/drivers/leds/Makefile
>> @@ -76,6 +76,7 @@ obj-$(CONFIG_LEDS_MLXREG) += leds-mlxreg.o
>> obj-$(CONFIG_LEDS_NIC78BX) += leds-nic78bx.o
>> obj-$(CONFIG_LEDS_MT6323) += leds-mt6323.o
>> obj-$(CONFIG_LEDS_LM3692X) += leds-lm3692x.o
>> +obj-$(CONFIG_LEDS_LM3601X) += leds-lm3601x.o
>>
>> # LED SPI Drivers
>> obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
>> diff --git a/drivers/leds/leds-lm3601x.c b/drivers/leds/leds-lm3601x.c
>> new file mode 100644
>> index 000000000000..4104c259c65d
>> --- /dev/null
>> +++ b/drivers/leds/leds-lm3601x.c
>> @@ -0,0 +1,611 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Flash and torch driver for Texas Instruments LM3601X LED
>> + * Flash driver chip family
>> + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
>> + */
>> +
>> +#include <linux/delay.h>
>> +#include <linux/i2c.h>
>> +#include <linux/leds.h>
>> +#include <linux/led-class-flash.h>
>> +#include <linux/module.h>
>> +#include <linux/regmap.h>
>> +#include <linux/slab.h>
>> +#include <uapi/linux/uleds.h>
>> +
>> +#define LM3601X_LED_TORCH 0x0
>> +#define LM3601X_LED_STROBE 0x1
>> +#define LM3601X_LED_IR 0x2
>> +
>> +/* Registers */
>> +#define LM3601X_ENABLE_REG 0x01
>> +#define LM3601X_CFG_REG 0x02
>> +#define LM3601X_LED_FLASH_REG 0x03
>> +#define LM3601X_LED_TORCH_REG 0x04
>> +#define LM3601X_FLAGS_REG 0x05
>> +#define LM3601X_DEV_ID_REG 0x06
>> +
>> +#define LM3601X_SW_RESET BIT(7)
>> +
>> +/* Enable Mode bits */
>> +#define LM3601X_MODE_STANDBY 0x00
>> +#define LM3601X_MODE_IR_DRV BIT(0)
>> +#define LM3601X_MODE_TORCH BIT(1)
>> +#define LM3601X_MODE_STROBE (BIT(0) | BIT(1))
>> +#define LM3601X_STRB_EN BIT(2)
>> +#define LM3601X_STRB_LVL_TRIG ~BIT(3)
>> +#define LM3601X_STRB_EDGE_TRIG BIT(3)
>> +#define LM3601X_IVFM_EN BIT(4)
>> +
>> +#define LM36010_BOOST_LIMIT_19 ~BIT(5)
>> +#define LM36010_BOOST_LIMIT_28 BIT(5)
>> +#define LM36010_BOOST_FREQ_2MHZ ~BIT(6)
>> +#define LM36010_BOOST_FREQ_4MHZ BIT(6)
>> +#define LM36010_BOOST_MODE_NORM ~BIT(7)
>> +#define LM36010_BOOST_MODE_PASS BIT(7)
>> +
>> +/* Flag Mask */
>> +#define LM3601X_FLASH_TIME_OUT BIT(0)
>> +#define LM3601X_UVLO_FAULT BIT(1)
>> +#define LM3601X_THERM_SHUTDOWN BIT(2)
>> +#define LM3601X_THERM_CURR BIT(3)
>> +#define LM36010_CURR_LIMIT BIT(4)
>> +#define LM3601X_SHORT_FAULT BIT(5)
>> +#define LM3601X_IVFM_TRIP BIT(6)
>> +#define LM36010_OVP_FAULT BIT(7)
>> +
>> +#define LM3601X_MIN_TORCH_I_UA 2400
>> +#define LM3601X_MIN_STROBE_I_MA 11
>> +
>> +enum lm3601x_type {
>> + CHIP_LM36010 = 0,
>> + CHIP_LM36011,
>> +};
>> +
>> +/**
>> + * struct lm3601x_max_timeouts -
>> + * @timeout: timeout value in ms
>> + * @regval: the value of the register to write
>> + */
>> +struct lm3601x_max_timeouts {
>> + int timeout;
>> + int reg_val;
>> +};
>> +
>> +/**
>> + * struct lm3601x_led -
>> + * @lock: Lock for reading/writing the device
>> + * @regmap: Devices register map
>> + * @client: Pointer to the I2C client
>> + * @cdev_torch: led class device pointer for the torch
>> + * @cdev_ir: led class device pointer for infrared
>> + * @fled_cdev: flash led class device pointer
>> + * @strobe_node: DT device node for the strobe
>> + * @torch: LED label for the torch
>> + * @strobe: LED label for the strobe
>> + * @ir: LED label for the infrared
>> + * @last_flag: last known flags register value
>> + * @strobe_timeout: the timeout for the strobe
>> + * @torch_current_max: maximum current for the torch
>> + * @strobe_current_max: maximum current for the strobe
>> + * @max_strobe_timeout: maximum timeout for the strobe
>> + */
>> +struct lm3601x_led {
>> + struct mutex lock;
>> + struct regmap *regmap;
>> + struct i2c_client *client;
>> +
>> + struct led_classdev cdev_torch;
>> + struct led_classdev cdev_ir;
>> +
>> + struct led_classdev_flash fled_cdev;
>> +
>> + struct device_node *strobe_node;
>> + struct device_node *torch_node;
>> + struct device_node *ir_node;
>> +
>> + char torch[LED_MAX_NAME_SIZE];
>> + char strobe[LED_MAX_NAME_SIZE];
>> + char ir[LED_MAX_NAME_SIZE];
>> +
>> + unsigned int last_flag;
>> + unsigned int strobe_timeout;
>> +
>> + u32 torch_current_max;
>> + u32 strobe_current_max;
>> + u32 max_strobe_timeout;
>> +};
>> +
>> +static const struct lm3601x_max_timeouts strobe_timeouts[] = {
>> + { 40, 0x00 },
>> + { 80, 0x01 },
>> + { 120, 0x02 },
>> + { 160, 0x03 },
>> + { 200, 0x04 },
>> + { 240, 0x05 },
>> + { 280, 0x06 },
>> + { 320, 0x07 },
>> + { 360, 0x08 },
>> + { 400, 0x09 },
>> + { 600, 0x0a },
>> + { 800, 0x0b },
>> + { 1000, 0x0c },
>> + { 1200, 0x0d },
>> + { 1400, 0x0e },
>> + { 1600, 0x0f },
>> +};
>> +
>> +static const struct reg_default lm3601x_regmap_defs[] = {
>> + { LM3601X_ENABLE_REG, 0x20 },
>> + { LM3601X_CFG_REG, 0x15 },
>> + { LM3601X_LED_FLASH_REG, 0x00 },
>> + { LM3601X_LED_TORCH_REG, 0x00 },
>> +};
>> +
>> +static bool lm3601x_volatile_reg(struct device *dev, unsigned int reg)
>> +{
>> + switch (reg) {
>> + case LM3601X_FLAGS_REG:
>> + return true;
>> + default:
>> + return false;
>> + }
>> +}
>> +
>> +static const struct regmap_config lm3601x_regmap = {
>> + .reg_bits = 8,
>> + .val_bits = 8,
>> +
>> + .max_register = LM3601X_DEV_ID_REG,
>> + .reg_defaults = lm3601x_regmap_defs,
>> + .num_reg_defaults = ARRAY_SIZE(lm3601x_regmap_defs),
>> + .cache_type = REGCACHE_FLAT,
>
>
> Should use REGCACHE_RBTREE here, flat cache is IMHO broken, Mark
> disagrees but still recommends not using unless you know what you are doing:
>
> https://lkml.org/lkml/2018/1/8/232

OK I was going back and forth on this.
I will update it

>
>
>> + .volatile_reg = lm3601x_volatile_reg,
>> +};
>> +
>> +static struct lm3601x_led *fled_cdev_to_led(
>> + struct led_classdev_flash *fled_cdev)
>> +{
>> + return container_of(fled_cdev, struct lm3601x_led, fled_cdev);
>> +}
>> +
>> +static int lm3601x_read_faults(struct lm3601x_led *led)
>> +{
>> + int flags_val;
>> + int ret;
>> +
>> + ret = regmap_read(led->regmap, LM3601X_FLAGS_REG, &flags_val);
>> + if (ret < 0)
>> + return -EIO;
>> +
>> + led->last_flag = flags_val;
>> +
>> + return led->last_flag;
>> +}
>> +
>> +static int lm3601x_torch_brightness_set(struct led_classdev *cdev,
>> + enum led_brightness brightness)
>> +{
>> + struct lm3601x_led *led =
>> + container_of(cdev, struct lm3601x_led, cdev_torch);
>> + int ret;
>> + u8 brightness_val;
>> +
>> + mutex_lock(&led->lock);
>> +
>> + ret = lm3601x_read_faults(led);
>> + if (ret < 0)
>> + goto out;
>> +
>> + if (brightness == LED_OFF) {
>> + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
>> + LM3601X_MODE_TORCH, LED_OFF);
>> + goto out;
>> + }
>> +
>> + if (brightness == LED_ON)
>> + brightness_val = LED_ON;
>> + else
>> + brightness_val = (brightness/2);
>> +
>> + ret = regmap_write(led->regmap, LM3601X_LED_TORCH_REG, brightness_val);
>> + if (ret < 0)
>> + goto out;
>> +
>> + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
>> + LM3601X_MODE_TORCH,
>> + LM3601X_MODE_TORCH);
>> +
>> +out:
>> + mutex_unlock(&led->lock);
>> + return ret;
>> +}
>> +
>> +static int lm3601x_strobe_set(struct led_classdev_flash *fled_cdev,
>> + bool state)
>> +{
>> + struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
>> + int ret;
>> + int current_timeout;
>> + int reg_count;
>> + int i;
>> + int timeout_reg_val = 0;
>> +
>> + mutex_lock(&led->lock);
>> +
>> + ret = regmap_read(led->regmap, LM3601X_CFG_REG, &current_timeout);
>> + if (ret < 0)
>> + goto out;
>> +
>> + reg_count = ARRAY_SIZE(strobe_timeouts);
>> + for (i = 0; i < reg_count; i++) {
>> + if (led->strobe_timeout > strobe_timeouts[i].timeout)
>> + continue;
>> +
>> + if (led->strobe_timeout <= strobe_timeouts[i].timeout) {
>> + timeout_reg_val = (strobe_timeouts[i].reg_val << 1);
>> + break;
>> + }
>> +
>> + ret = -EINVAL;
>> + goto out;
>> + }
>> +
>> + if (led->strobe_timeout != current_timeout)
>> + ret = regmap_update_bits(led->regmap, LM3601X_CFG_REG,
>> + 0x1e, timeout_reg_val);
>
>
> Magic number, use defined mask.
>

OK

>
>> +
>> + if (state)
>> + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
>> + LM3601X_MODE_STROBE,
>> + LM3601X_MODE_STROBE);
>> + else
>> + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
>> + LM3601X_MODE_STROBE, LED_OFF);
>> +
>> + ret = lm3601x_read_faults(led);
>> +out:
>> + mutex_unlock(&led->lock);
>> + return ret;
>> +}
>> +
>> +static int lm3601x_strobe_brightness_set(struct led_classdev *cdev,
>> + enum led_brightness brightness)
>> +{
>> + struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(cdev);
>> + struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
>> + int ret;
>> + u8 brightness_val;
>> +
>> + mutex_lock(&led->lock);
>> + ret = lm3601x_read_faults(led);
>> + if (ret < 0)
>> + goto out;
>> +
>> + if (brightness == LED_OFF) {
>> + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
>> + LM3601X_MODE_STROBE, LED_OFF);
>> + goto out;
>> + }
>> +
>> + if (brightness == LED_ON)
>> + brightness_val = LED_ON;
>> + else
>> + brightness_val = (brightness/2);
>> +
>> + ret = regmap_write(led->regmap, LM3601X_LED_FLASH_REG, brightness_val);
>> +
>> +out:
>> + mutex_unlock(&led->lock);
>> + return ret;
>> +}
>> +
>> +static int lm3601x_strobe_timeout_set(struct led_classdev_flash *fled_cdev,
>> + u32 timeout)
>> +{
>> + struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
>> + int ret = 0;
>> +
>> + mutex_lock(&led->lock);
>> +
>> + if (timeout > led->max_strobe_timeout)
>> + ret = -EINVAL;
>> + else
>> + led->strobe_timeout = timeout;
>> +
>> + mutex_unlock(&led->lock);
>> +
>> + return ret;
>> +}
>> +
>> +static int lm3601x_strobe_get(struct led_classdev_flash *fled_cdev,
>> + bool *state)
>> +{
>> + struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
>> + int ret;
>> + int strobe_state;
>> +
>> + mutex_lock(&led->lock);
>> +
>> + ret = regmap_read(led->regmap, LM3601X_ENABLE_REG, &strobe_state);
>> + if (ret < 0)
>> + goto out;
>> +
>> + *state = strobe_state & LM3601X_MODE_STROBE;
>> +
>> +out:
>> + mutex_unlock(&led->lock);
>> + return ret;
>> +}
>> +
>> +static int lm3601x_ir_brightness_set(struct led_classdev *cdev,
>> + enum led_brightness brightness)
>> +{
>> + struct lm3601x_led *led =
>> + container_of(cdev, struct lm3601x_led, cdev_ir);
>> + int ret;
>> + u8 brightness_val;
>> +
>> + mutex_lock(&led->lock);
>> + ret = lm3601x_read_faults(led);
>> + if (ret < 0)
>> + goto out;
>> +
>> + if (brightness == LED_OFF) {
>> + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
>> + 0xfe, LED_OFF);
>
>
> Use defined mask

OK

>
>
>> + goto out;
>> + }
>> +
>> + if (brightness == LED_ON)
>> + brightness_val = LED_ON;
>> + else
>> + brightness_val = (brightness/2);
>> +
>> + ret = regmap_write(led->regmap, LM3601X_LED_FLASH_REG, brightness_val);
>> + if (ret < 0)
>> + goto out;
>> +
>> + ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
>> + LM3601X_MODE_IR_DRV,
>> + LM3601X_MODE_IR_DRV);
>> +
>> +out:
>> + mutex_unlock(&led->lock);
>> + return ret;
>> +}
>> +
>> +static int lm3601x_strobe_fault_get(struct led_classdev_flash *fled_cdev,
>> + u32 *fault)
>> +{
>> + struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
>> +
>> + lm3601x_read_faults(led);
>> +
>> + *fault = led->last_flag;
>> +
>> + return 0;
>> +}
>> +
>> +static const struct led_flash_ops strobe_ops = {
>> + .strobe_set = lm3601x_strobe_set,
>> + .strobe_get = lm3601x_strobe_get,
>> + .timeout_set = lm3601x_strobe_timeout_set,
>> + .fault_get = lm3601x_strobe_fault_get,
>> +};
>> +
>> +static int lm3601x_register_leds(struct lm3601x_led *led)
>> +{
>> + struct led_classdev_flash *fled_cdev;
>> + struct led_classdev *led_cdev;
>> + int err = -ENODEV;
>> +
>> + if (led->torch_node) {
>> + led->cdev_torch.name = led->torch;
>> + led->cdev_torch.max_brightness = LED_FULL;
>> + led->cdev_torch.brightness_set_blocking = lm3601x_torch_brightness_set;
>> + err = devm_led_classdev_register(&led->client->dev,
>> + &led->cdev_torch);
>> + if (err < 0)
>> + return err;
>> + }
>> +
>> + if (led->strobe_node) {
>> + fled_cdev = &led->fled_cdev;
>> + fled_cdev->ops = &strobe_ops;
>> +
>> + led_cdev = &fled_cdev->led_cdev;
>> + led_cdev->name = led->strobe;
>> + led_cdev->max_brightness = LED_FULL;
>> + led_cdev->brightness_set_blocking = lm3601x_strobe_brightness_set;
>> + led_cdev->flags |= LED_DEV_CAP_FLASH;
>> +
>> + err = led_classdev_flash_register(&led->client->dev,
>> + fled_cdev);
>> + if (err < 0)
>> + return err;
>> + }
>> +
>> + if (led->ir_node) {
>> + led->cdev_ir.name = led->ir;
>> + led->cdev_ir.max_brightness = LED_FULL;
>> + led->cdev_ir.brightness_set_blocking =
>> + lm3601x_ir_brightness_set;
>> +
>> + err = devm_led_classdev_register(&led->client->dev,
>> + &led->cdev_ir);
>> + }
>> +
>> + return err;
>> +}
>> +
>> +static void lm3601x_init_flash_timeout(struct lm3601x_led *led)
>> +{
>> + struct led_flash_setting *setting;
>> +
>> + setting = &led->fled_cdev.timeout;
>> + setting->min = strobe_timeouts[0].timeout;
>> + setting->max = led->max_strobe_timeout;
>> + setting->step = 40;
>> + setting->val = led->max_strobe_timeout;
>> +}
>> +
>> +static int lm3601x_parse_node(struct lm3601x_led *led,
>> + struct device_node *node)
>> +{
>> + struct device_node *child_node;
>> + const char *name;
>> + int ret = -ENODEV;
>> +
>> + for_each_available_child_of_node(node, child_node) {
>> + u32 id = 0;
>> +
>> + of_property_read_u32(child_node, "reg", &id);
>> +
>> + switch (id) {
>> + case LM3601X_LED_TORCH:
>> + led->torch_node = of_node_get(child_node);
>> + break;
>> + case LM3601X_LED_STROBE:
>> + led->strobe_node = of_node_get(child_node);
>> + break;
>> + case LM3601X_LED_IR:
>> + led->ir_node = of_node_get(child_node);
>> + break;
>> + default:
>> + dev_warn(&led->client->dev,
>> + "unknown LED %u encountered, ignoring\n", id);
>> + break;
>> + }
>> + }
>> +
>> + if (led->torch_node) {
>> + ret = of_property_read_string(led->torch_node, "label", &name);
>> + if (!ret)
>> + snprintf(led->torch, sizeof(led->torch),
>> + "%s:%s", led->torch_node->name, name);
>> + else
>> + snprintf(led->torch, sizeof(led->torch),
>> + "%s:torch", led->torch_node->name);
>> + ret = of_property_read_u32(led->torch_node, "led-max-microamp",
>> + &led->torch_current_max);
>> + if (ret < 0) {
>> + led->torch_current_max = LM3601X_MIN_TORCH_I_UA;
>> + dev_warn(&led->client->dev,
>> + "led-max-microamp DT property missing\n");
>> + }
>> + }
>> +
>> + if (led->strobe_node) {
>> + ret = of_property_read_string(led->strobe_node, "label", &name);
>> + if (!ret)
>> + snprintf(led->strobe, sizeof(led->strobe),
>> + "%s:%s", led->strobe_node->name, name);
>> + else
>> + snprintf(led->strobe, sizeof(led->strobe),
>> + "%s::strobe", led->strobe_node->name);
>> +
>> + ret = of_property_read_u32(led->strobe_node,
>> + "flash-max-microamp",
>> + &led->strobe_current_max);
>> + if (ret < 0) {
>> + led->strobe_current_max = LM3601X_MIN_STROBE_I_MA;
>> + dev_warn(&led->client->dev,
>> + "flash-max-microamp DT property missing\n");
>> + }
>> +
>> + ret = of_property_read_u32(led->strobe_node,
>> + "flash-max-timeout-us",
>> + &led->max_strobe_timeout);
>> + if (ret < 0) {
>> + led->max_strobe_timeout = strobe_timeouts[0].reg_val;
>> + dev_warn(&led->client->dev,
>> + "flash-max-timeout-us DT property missing\n");
>> + }
>> +
>> + lm3601x_init_flash_timeout(led);
>> +
>> + }
>> +
>> + if (led->ir_node) {
>> + ret = of_property_read_string(led->ir_node, "label", &name);
>> + if (!ret)
>> + snprintf(led->ir, sizeof(led->ir),
>> + "%s:%s", led->ir_node->name, name);
>> + else
>> + snprintf(led->ir, sizeof(led->ir),
>> + "%s::infrared", led->ir_node->name);
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static int lm3601x_probe(struct i2c_client *client,
>> + const struct i2c_device_id *id)
>> +{
>> + struct lm3601x_led *led;
>> + int err;
>> +
>> + led = devm_kzalloc(&client->dev,
>> + sizeof(struct lm3601x_led), GFP_KERNEL);
>> + if (!led)
>> + return -ENOMEM;
>> +
>> + err = lm3601x_parse_node(led, client->dev.of_node);
>> + if (err < 0)
>> + return -ENODEV;
>> +
>> + led->client = client;
>> + led->regmap = devm_regmap_init_i2c(client, &lm3601x_regmap);
>> + if (IS_ERR(led->regmap)) {
>> + err = PTR_ERR(led->regmap);
>> + dev_err(&client->dev,
>> + "Failed to allocate register map: %d\n", err);
>> + return err;
>> + }
>> +
>> + mutex_init(&led->lock);
>> + i2c_set_clientdata(client, led);
>> + err = lm3601x_register_leds(led);
>> +
>> + return err;
>> +}
>> +
>> +static int lm3601x_remove(struct i2c_client *client)
>> +{
>> + struct lm3601x_led *led = i2c_get_clientdata(client);
>> +
>> + regmap_write(led->regmap, LM3601X_ENABLE_REG, 0);
>> +
>
>
> If probe doesn't enable this, remove shouldn't disable it. It can lead
> to odd cases if the driver is removed and added again.

I want to make sure the LED is off and in standby mode. Maybe I will just set it to
the default value instead.

>
> Plus, removing the driver is not a command to disable the LED anyway.

True but you don't want to leave any LEDs in the on state without a driver to support it.
This could burn out the LED or the board if left on on max brightness


Dan

>
>
>> + return 0;
>> +}
>> +
>> +static const struct i2c_device_id lm3601x_id[] = {
>> + { "LM36010", CHIP_LM36010 },
>> + { "LM36011", CHIP_LM36011 },
>> + { },
>> +};
>> +MODULE_DEVICE_TABLE(i2c, lm3601x_id);
>> +
>> +static const struct of_device_id of_lm3601x_leds_match[] = {
>> + { .compatible = "ti,lm36010", },
>> + { .compatible = "ti,lm36011", },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(of, of_lm3601x_leds_match);
>> +
>> +static struct i2c_driver lm3601x_i2c_driver = {
>> + .driver = {
>> + .name = "lm3601x",
>> + .of_match_table = of_lm3601x_leds_match,
>> + },
>> + .probe = lm3601x_probe,
>> + .remove = lm3601x_remove,
>> + .id_table = lm3601x_id,
>> +};
>> +module_i2c_driver(lm3601x_i2c_driver);
>> +
>> +MODULE_DESCRIPTION("Texas Instruments Flash Lighting driver for LM3601X");
>> +MODULE_AUTHOR("Dan Murphy <dmurphy@xxxxxx>");
>> +MODULE_LICENSE("GPL v2");
>>


--
------------------
Dan Murphy