Re: [PATCH v2] net: phy: DP83TC811: Introduce support for the DP83TC811 phy

[David Miller]

From: Dan Murphy <dmurphy@xxxxxx>
Date: Wed, 9 May 2018 09:09:02 -0500

> Add support for the DP83811 phy.
> 
> The DP83811 supports both rgmii and sgmii interfaces.
> There are 2 part numbers for this the DP83TC811R does not
> reliably support the SGMII interface but the DP83TC811S will.
> 
> There is not a way to differentiate these parts from the
> hardware or register set.  So this is controlled via the DT
> to indicate which phy mode is required.  Or the part can be
> strapped to a certain interface.
> 
> Data sheet can be found here:
> http://www.ti.com/product/DP83TC811S-Q1/description
> http://www.ti.com/product/DP83TC811R-Q1/description
> 
> Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
> ---
> 
> v2 - Remove extra config_init in reset, update config_init call back function
> fix a checkpatch alignment issue, add SGMII check in autoneg api - https://patchwork.kernel.org/patch/10389323/

Hello Dan, just a few coding style fixes:

> +static int dp83811_set_wol(struct phy_device *phydev,
> +			   struct ethtool_wolinfo *wol)
> +{
> +	struct net_device *ndev = phydev->attached_dev;
> +	u16 value;
> +	const u8 *mac;

Please order local variables longest to shortest line.

> +static void dp83811_get_wol(struct phy_device *phydev,
> +			    struct ethtool_wolinfo *wol)
> +{
> +	int value;
> +	u16 sopass_val;

Likewise.

> +static int dp83811_config_aneg(struct phy_device *phydev)
> +{
> +	int err;
> +	int value;

Likewise.

However, I would recommend that in these functions having two
integer local variables that you just declare them both on the
same line like:

	int err, value;

> +static int dp83811_config_init(struct phy_device *phydev)
> +{
> +	int err;
> +	int value;

Likewise.

Thank you.