Re: Delivery Status Notification (Failure)

[Lucas Stach]

Am Freitag, den 11.05.2018, 13:39 +0100 schrieb Russell King - ARM Linux:
> On Fri, May 11, 2018 at 05:07:37PM +0530, Pintu Kumar wrote:
> > Hi,
> > 
> > I need one help.
> > I am using i.MX7 Sabre board with kernel version 4.1.15
> > 
> > Let's say I am interested in GPIO number: 21
> > I wanted to set CPU affinity for particular GPIO->IRQ number, so I
> > tried the below steps:
> > root@10:~# echo 21 > /sys/class/gpio/export
> > root@10:~# echo "rising" > /sys/class/gpio/gpio21/edge
> > root@10:~# cat /proc/interrupts | grep 21
> >   47: 0 0 gpio-mxc 21 Edge gpiolib
> > root@10:~# cat /sys/class/gpio/gpio21/direction
> > in
> > root@10:~# cat /proc/irq/47/smp_affinity
> > 3
> > root@10:~# echo 2 > /proc/irq/47/smp_affinity
> > -bash: echo: write error: Input/output error
> > 
> > But I get input/output error.
> > When I debug further, found that irq_can_set_affinity is returning 0:
> > [    0.000000] genirq: irq_can_set_affinity (0): balance: 1,
> > irq_data.chip: a81b7e48, irq_set_affinity:   (null)
> > [    0.000000] write_irq_affinity: FAIL
> > 
> > I also tried first setting /proc/irq/default_smp_affinity to 2 (from 3).
> > This change is working, but the smp_affinity setting for the new IRQ
> > is not working.
> > 
> > When I try to set smp_affinity for mmc0, then it works.
> > # cat /proc/interrupts | grep mmc
> > 295:         55          0     GPCV2  22 Edge      mmc0
> > 296:          0          0     GPCV2  23 Edge      mmc1
> > 297:         52          0     GPCV2  24 Edge      mmc2
> > 
> > root@10:~# echo 2 > /proc/irq/295/smp_affinity
> > root@10:~#
> > 
> > 
> > So, I wanted to know what are the conditions for which setting
> > smp_affinity for an IRQ will work ?
> > 
> > Is there any way by which I can set CPU affinity to a GPIO -> IRQ ?
> > Whether, irq_set_affinity_hint() will work in this case ?
> 
> IRQ affinity is only supported where interrupts are _directly_ wired to
> the GIC.  It's the GIC which does the interrupt steering to the CPU
> cores.
> 
> Interrupts on downstream interrupt controllers (such as GPCV2) have no
> ability to be directed independently to other CPUs - the only possible
> way to change the mapping is to move _all_ interrupts on that controller,
> and any downstream chained interrupts at GIC level.
> 
> Hence why Interrupt 295 has no irq_set_affinity function: there is no way
> for the interrupt controller itself to change the affinity of the input
> interrupt.

The GPCv2 though is a secondary IRQ controller which has a 1:1 mapping
of its input IRQs to the upstream GIC IRQ lines. Affinity can thus be
handled by forwarding the request to the GIC by
irq_chip_set_affinity_parent().

As this is handled correctly in the upstream kernel since the first
commit introducing support for the GPCv2, it seems the issue is only
present in some downstream kernel.

Regards,
Lucas