Re: [PATCH v2 3/4] Documentation: bindings: add phy_config for Rockchip USB Type-C PHY
From: Enric Balletbo Serra
Date: Fri May 11 2018 - 12:09:43 EST
Hi Lin,
2018-05-11 16:43 GMT+02:00 Sean Paul <seanpaul@xxxxxxxxxxxx>:
> On Wed, May 09, 2018 at 06:22:43PM +0800, Lin Huang wrote:
>> If want to do training outside DP Firmware, need phy voltage swing
>> and pre_emphasis value.
>>
>> Signed-off-by: Lin Huang <hl@xxxxxxxxxxxxxx>
>
> Adding Rob Herring so he has a hope of seeing this.
>
And adding the devicetree ML, otherwise Rob will probably ignore the patch.
>> ---
>> Changes in v2:
>> - rebase
>>
>> Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt | 4 +++-
>> 1 file changed, 3 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
>> index 960da7f..eda26dd 100644
>> --- a/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
>> +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
>> @@ -17,7 +17,9 @@ Required properties:
>>
>> Optional properties:
>> - extcon : extcon specifier for the Power Delivery
>> -
>> + - rockchip,phy_config : That's phy voltage swing and pre_emphasis
>> + setting, if want to do dp training outside
>> + dp firmware, need to add these value.
>
> What are the units?
>
Also, I think that will be good add an example or include the property
in the current examples to see how works. It's not clear from the
property description. I suppose it is an array of pairs <swing
pre-emphasis>?
nit:
-rockchip,phy_config: A list of voltage swing (unit) and pre-emphasis
(unit) pairs. Use this property to enable software link training
instead of hardware link training.
Best regards,
Enric
> Sean
>
>> Required nodes : a sub-node is required for each port the phy provides.
>> The sub-node name is used to identify dp or usb3 port,
>> and shall be the following entries:
>> --
>> 2.7.4
>>
>
> --
> Sean Paul, Software Engineer, Google / Chromium OS