Re: [PATCH v3] net: phy: DP83TC811: Introduce support for the DP83TC811 phy

[David Miller]

From: Dan Murphy <dmurphy@xxxxxx>
Date: Fri, 11 May 2018 13:08:19 -0500

> Add support for the DP83811 phy.
> 
> The DP83811 supports both rgmii and sgmii interfaces.
> There are 2 part numbers for this the DP83TC811R does not
> reliably support the SGMII interface but the DP83TC811S will.
> 
> There is not a way to differentiate these parts from the
> hardware or register set.  So this is controlled via the DT
> to indicate which phy mode is required.  Or the part can be
> strapped to a certain interface.
> 
> Data sheet can be found here:
> http://www.ti.com/product/DP83TC811S-Q1/description
> http://www.ti.com/product/DP83TC811R-Q1/description
> 
> Signed-off-by: Dan Murphy <dmurphy@xxxxxx>

Applied to net-next, thank you.