Re: [PATCH 10/18 v2] regulator: s2mps11: Pass descriptor instead of GPIO number
From: Krzysztof Kozlowski
Date: Mon May 14 2018 - 03:59:45 EST
On Mon, Apr 23, 2018 at 1:07 AM, Linus Walleij <linus.walleij@xxxxxxxxxx> wrote:
> Instead of passing a global GPIO number for the enable GPIO, pass
> a descriptor looked up with the standard devm_gpiod_get_optional()
> call.
>
> This regulator supports passing platform data, but enable/sleep
> regulators are looked up from the device tree exclusively, so
> we can need not touch other files.
>
> Cc: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> Cc: Sangbeom Kim <sbkim73@xxxxxxxxxxx>
> Cc: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
> ---
> ChangeLog v1->v2:
> - Rebase the patch on the other changes.
> ---
> drivers/regulator/s2mps11.c | 46 ++++++++++++++++++++++-----------------------
> 1 file changed, 23 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
> index 7726b874e539..9a1dca26362e 100644
> --- a/drivers/regulator/s2mps11.c
> +++ b/drivers/regulator/s2mps11.c
> @@ -18,7 +18,7 @@
>
> #include <linux/bug.h>
> #include <linux/err.h>
> -#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/slab.h>
> #include <linux/module.h>
> #include <linux/of.h>
> @@ -27,7 +27,6 @@
> #include <linux/regulator/driver.h>
> #include <linux/regulator/machine.h>
> #include <linux/regulator/of_regulator.h>
> -#include <linux/of_gpio.h>
> #include <linux/mfd/samsung/core.h>
> #include <linux/mfd/samsung/s2mps11.h>
> #include <linux/mfd/samsung/s2mps13.h>
> @@ -57,7 +56,7 @@ struct s2mps11_info {
> * Array (size: number of regulators) with GPIO-s for external
> * sleep control.
> */
> - int *ext_control_gpio;
> + struct gpio_desc **ext_control_gpiod;
> };
>
> static int get_ramp_delay(int ramp_delay)
> @@ -524,7 +523,7 @@ static int s2mps14_regulator_enable(struct regulator_dev *rdev)
> case S2MPS14X:
> if (test_bit(rdev_get_id(rdev), s2mps11->suspend_state))
> val = S2MPS14_ENABLE_SUSPEND;
> - else if (gpio_is_valid(s2mps11->ext_control_gpio[rdev_get_id(rdev)]))
> + else if (s2mps11->ext_control_gpiod[rdev_get_id(rdev)])
> val = S2MPS14_ENABLE_EXT_CONTROL;
> else
> val = rdev->desc->enable_mask;
> @@ -818,7 +817,7 @@ static int s2mps14_pmic_enable_ext_control(struct s2mps11_info *s2mps11,
> static void s2mps14_pmic_dt_parse_ext_control_gpio(struct platform_device *pdev,
> struct of_regulator_match *rdata, struct s2mps11_info *s2mps11)
> {
> - int *gpio = s2mps11->ext_control_gpio;
> + struct gpio_desc **gpio = s2mps11->ext_control_gpiod;
> unsigned int i;
> unsigned int valid_regulators[3] = { S2MPS14_LDO10, S2MPS14_LDO11,
> S2MPS14_LDO12 };
> @@ -829,11 +828,20 @@ static void s2mps14_pmic_dt_parse_ext_control_gpio(struct platform_device *pdev,
> if (!rdata[reg].init_data || !rdata[reg].of_node)
> continue;
>
> - gpio[reg] = of_get_named_gpio(rdata[reg].of_node,
> - "samsung,ext-control-gpios", 0);
> - if (gpio_is_valid(gpio[reg]))
> - dev_dbg(&pdev->dev, "Using GPIO %d for ext-control over %d/%s\n",
> - gpio[reg], reg, rdata[reg].name);
> + gpio[reg] = devm_gpiod_get_from_of_node(&pdev->dev,
> + rdata[reg].of_node,
> + "samsung,ext-control-gpios",
> + 0,
> + GPIOD_OUT_HIGH,
> + "s2mps11-LDO");
The same as with max77686 - this can be also for bucks so how about
the name of "s2mps11-regulator"?
Rest looks good.
Best regards,
Krzysztof