[RFC PATCH 10/10] arm64: dts: rockchip: Enable dmc and dfi nodes on gru.

From: Enric Balletbo i Serra
Date: Mon May 14 2018 - 17:16:57 EST


From: Lin Huang <hl@xxxxxxxxxxxxxx>

Enable the DMC (Dynamic Memory Controller) and the DFI (DDR PHY Interface)
nodes on gru/kevin boards so we can support DDR DVFS.

Signed-off-by: Lin Huang <hl@xxxxxxxxxxxxxx>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
---

arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi | 21 ++++++++++++++++++++
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 2 +-
2 files changed, 22 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index 18f546f2dfd1..ba2cfdd082b8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -525,6 +525,12 @@
extcon = <&usbc_extcon0>, <&usbc_extcon1>;
};

+&dmc_opp_table {
+ opp04 {
+ opp-suspend;
+ };
+};
+
/*
* Set some suspend operating points to avoid OVP in suspend
*
@@ -600,6 +606,10 @@
<400000000>;
};

+&display_subsystem {
+ devfreq = <&dmc>;
+};
+
&emmc_phy {
status = "okay";
};
@@ -766,6 +776,17 @@ ap_i2c_audio: &i2c8 {
status = "okay";
};

+&dfi {
+ status = "okay";
+};
+
+&dmc {
+ status = "okay";
+ center-supply = <&ppvar_centerlogic>;
+ upthreshold = <25>;
+ downdifferential = <15>;
+};
+
&sdhci {
/*
* Signal integrity isn't great at 200 MHz and 150 MHz (DDR) gives the
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index e012cc8ae3d4..518c742293fc 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -160,7 +160,7 @@
};
};

- display-subsystem {
+ display_subsystem: display-subsystem {
compatible = "rockchip,display-subsystem";
ports = <&vopl_out>, <&vopb_out>;
};
--
2.17.0