[PATCH 19/27] drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc: removed extra blank lines

[John Whitmore]

Coding style edit to clear the checkpatch.pl check:
CHECK: Please don't use multiple blank lines

Signed-off-by: John Whitmore <johnfwhitmore@xxxxxxxxx>
---
 .../staging/rtl8192u/ieee80211/rtl819x_HTProc.c    | 24 ----------------------
 1 file changed, 24 deletions(-)

diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index b138057c619e..b076ff66bc8f 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -266,7 +266,6 @@ u16 HTHalfMcsToDataRate(struct ieee80211_device *ieee,	u8	nMcsRate)
 	return MCS_DATA_RATE[is40MHz][isShortGI][(nMcsRate&0x7f)];
 }
 
-
 u16 HTMcsToDataRate(struct ieee80211_device *ieee, u8 nMcsRate)
 {
 	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
@@ -321,8 +320,6 @@ u16  TxCountToDataRate(struct ieee80211_device *ieee, u8 nDataRate)
 	}
 }
 
-
-
 bool IsHTHalfNmodeAPs(struct ieee80211_device *ieee)
 {
 	bool			retValue = false;
@@ -401,7 +398,6 @@ static u8 HTIOTActIsDisableMCS14(struct ieee80211_device *ieee, u8 *PeerMacAddr)
 	return 0;
 }
 
-
 /**
  * Function:	HTIOTActIsDisableMCS15
  *
@@ -514,7 +510,6 @@ void HTResetIOTSetting(
 	pHTInfo->IOTPeer = HT_IOT_PEER_UNKNOWN;
 }
 
-
 /*******************************************************************************
  *function:  Construct Capablility Element in Beacon... if HTEnable is turned on
  *   input:  struct ieee80211_device*	ieee
@@ -546,7 +541,6 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
 		pCapELE = (PHT_CAPABILITY_ELE)posHTCap;
 	}
 
-
 	//HT capability info
 	pCapELE->AdvCoding		= 0; // This feature is not supported now!!
 	if (ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))
@@ -569,7 +563,6 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
 	pCapELE->PSMP			= 0; // Do not support now!!
 	pCapELE->LSigTxopProtect	= 0; // Do not support now!!
 
-
 	//MAC HT parameters info
 	// TODO: Nedd to take care of this part
 	IEEE80211_DEBUG(IEEE80211_DL_HT, "TX HT cap/info ele BW=%d MaxAMSDUSize:%d DssCCk:%d\n", pCapELE->ChlWidth, pCapELE->MaxAMSDUSize, pCapELE->DssCCk);
@@ -605,7 +598,6 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
 	//Extended HT Capability Info
 	memset(&pCapELE->ExtHTCapInfo, 0, 2);
 
-
 	//TXBF Capabilities
 	memset(pCapELE->TxBFCap, 0, 4);
 
@@ -617,8 +609,6 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
 	else
 		*len = 26 + 2;
 
-
-
 //	IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA | IEEE80211_DL_HT, posHTCap, *len -2);
 
 	//Print each field in detail. Driver should not print out this message by default
@@ -667,7 +657,6 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
 
 		memset(pHTInfoEle->BasicMSC, 0, 16);
 
-
 		*len = 22 + 2; //same above
 
 	} else {
@@ -745,7 +734,6 @@ void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg,
 #endif
 }
 
-
 /*******************************************************************************
  *function:  Pick the right Rate Adaptive table to use
  *   input:  struct ieee80211_device*	ieee
@@ -851,8 +839,6 @@ u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8 *pMCSRateSet, u8 *pMCSF
 	return (mcsRate|0x80);
 }
 
-
-
 /*
  *
  * 1.Filter our operation rate set with AP's rate set
@@ -924,7 +910,6 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
 	else
 		pPeerHTInfo = (PHT_INFORMATION_ELE)(pHTInfo->PeerHTInfoBuf);
 
-
 	////////////////////////////////////////////////////////
 	// Configurations:
 	////////////////////////////////////////////////////////
@@ -957,7 +942,6 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
 	pHTInfo->bCurSuppCCK = pHTInfo->bRegSuppCCK &&
 			       (pPeerHTCap->DssCCk == 1);
 
-
 	//
 	// Config and configure A-MSDU setting
 	//
@@ -970,7 +954,6 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
 	else
 		pHTInfo->nCurrent_AMSDU_MaxSize = pHTInfo->nAMSDU_MaxSize;
 
-
 	//
 	// Config A-MPDU setting
 	//
@@ -1102,8 +1085,6 @@ void HTInitializeHTInfo(struct ieee80211_device *ieee)
 	pHTInfo->CurrentMPDUDensity = pHTInfo->MPDU_Density;
 	pHTInfo->CurrentAMPDUFactor = pHTInfo->AMPDU_Factor;
 
-
-
 	// Initialize all of the parameters related to 11n
 	memset((void *)(&(pHTInfo->SelfHTCap)), 0, sizeof(pHTInfo->SelfHTCap));
 	memset((void *)(&(pHTInfo->SelfHTInfo)), 0, sizeof(pHTInfo->SelfHTInfo));
@@ -1216,7 +1197,6 @@ void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee,	struct ieee802
 		if (bIOTAction)
 			pHTInfo->IOTAction |= HT_IOT_ACT_DISABLE_ALL_2SS;
 
-
 		bIOTAction = HTIOTActIsDisableEDCATurbo(ieee, pNetwork->bssid);
 		if (bIOTAction)
 			pHTInfo->IOTAction |= HT_IOT_ACT_DISABLE_EDCA_TURBO;
@@ -1228,8 +1208,6 @@ void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee,	struct ieee802
 		bIOTAction = HTIOTActIsCCDFsync(pNetwork->bssid);
 		if (bIOTAction)
 			pHTInfo->IOTAction |= HT_IOT_ACT_CDD_FSYNC;
-
-
 	} else {
 		pHTInfo->bCurrentHTSupport = false;
 		pHTInfo->bCurrentRT2RTAggregation = false;
@@ -1290,8 +1268,6 @@ void HTSetConnectBwMode(struct ieee80211_device *ieee, HT_CHANNEL_WIDTH	Bandwidt
 	if (!pHTInfo->bRegBW40MHz)
 		return;
 
-
-
 	// To reduce dummy operation
 //	if((pHTInfo->bCurBW40MHz==false && Bandwidth==HT_CHANNEL_WIDTH_20) ||
 //	   (pHTInfo->bCurBW40MHz==true && Bandwidth==HT_CHANNEL_WIDTH_20_40 && Offset==pHTInfo->CurSTAExtChnlOffset))
-- 
2.16.3