[PATCH v2] arm64: dts: qcom: sdm845: Sort nodes in the soc by address

From: Douglas Anderson
Date: Tue May 15 2018 - 00:00:02 EST


This is pure-churn and should be a no-op. I'm doing it in the hopes
of reducing merge conflicts. When things are sorted in a sane way
(and by base address seems sane) then it's less likely that future
patches will cause merge conflicts.

Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Acked-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---

Changes in v2:
- rebase atop tree today

arch/arm64/boot/dts/qcom/sdm845.dtsi | 96 ++++++++++++++--------------
1 file changed, 48 insertions(+), 48 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 7c85e7c596db..96dd4b2a41d6 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -198,6 +198,54 @@
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";

+ gcc: clock-controller@100000 {
+ compatible = "qcom,gcc-sdm845";
+ reg = <0x100000 0x1f0000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ tcsr_mutex_regs: syscon@1f40000 {
+ compatible = "syscon";
+ reg = <0x1f40000 0x40000>;
+ };
+
+ tlmm: pinctrl@3400000 {
+ compatible = "qcom,sdm845-pinctrl";
+ reg = <0x03400000 0xc00000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ spmi_bus: spmi@c440000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0xc440000 0x1100>,
+ <0xc600000 0x2000000>,
+ <0xe600000 0x100000>,
+ <0xe700000 0xa0000>,
+ <0xc40a000 0x26000>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ cell-index = <0>;
+ };
+
+ apss_shared: mailbox@17990000 {
+ compatible = "qcom,sdm845-apss-shared";
+ reg = <0x17990000 0x1000>;
+ #mbox-cells = <1>;
+ };
+
intc: interrupt-controller@17a00000 {
compatible = "arm,gic-v3";
#address-cells = <1>;
@@ -218,24 +266,6 @@
};
};

- gcc: clock-controller@100000 {
- compatible = "qcom,gcc-sdm845";
- reg = <0x100000 0x1f0000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- };
-
- tlmm: pinctrl@3400000 {
- compatible = "qcom,sdm845-pinctrl";
- reg = <0x03400000 0xc00000>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
timer@17c90000 {
#address-cells = <1>;
#size-cells = <1>;
@@ -293,35 +323,5 @@
status = "disabled";
};
};
-
- spmi_bus: spmi@c440000 {
- compatible = "qcom,spmi-pmic-arb";
- reg = <0xc440000 0x1100>,
- <0xc600000 0x2000000>,
- <0xe600000 0x100000>,
- <0xe700000 0xa0000>,
- <0xc40a000 0x26000>;
- reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
- interrupt-names = "periph_irq";
- interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
- qcom,ee = <0>;
- qcom,channel = <0>;
- #address-cells = <2>;
- #size-cells = <0>;
- interrupt-controller;
- #interrupt-cells = <4>;
- cell-index = <0>;
- };
-
- tcsr_mutex_regs: syscon@1f40000 {
- compatible = "syscon";
- reg = <0x1f40000 0x40000>;
- };
-
- apss_shared: mailbox@17990000 {
- compatible = "qcom,sdm845-apss-shared";
- reg = <0x17990000 0x1000>;
- #mbox-cells = <1>;
- };
};
};
--
2.17.0.441.gb46fe60e1d-goog