Re: [PATCH V3] Input: pm8941-pwrkey: add resin key capabilities

[Dmitry Torokhov]

On Mon, May 07, 2018 at 11:46:59AM -0700, Bjorn Andersson wrote:
> On Fri 04 May 17:10 PDT 2018, Dmitry Torokhov wrote:
> 
> > Hi Tirupathi,
> > 
> > On Fri, Mar 23, 2018 at 11:53:12AM +0530, Tirupathi Reddy wrote:
> > > Add resin key support to handle different types of key events
> > > defined in different platforms.
> > > 
> > > Signed-off-by: Tirupathi Reddy <tirupath@xxxxxxxxxxxxxx>
> > > ---
> > >  .../bindings/input/qcom,pm8941-pwrkey.txt          | 32 +++++++++
> > >  drivers/input/misc/pm8941-pwrkey.c                 | 81 ++++++++++++++++++++++
> > >  2 files changed, 113 insertions(+)
> > > 
> > > diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> [..]
> > >  EXAMPLE
> > >  
> > >  	pwrkey@800 {
> > > @@ -40,4 +66,10 @@ EXAMPLE
> > >  		interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
> > >  		debounce = <15625>;
> > >  		bias-pull-up;
> > > +
> > > +		resin {
> > > +			interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
> > > +			linux,code = <KEY_VOLUMEDOWN>;
> > > +			bias-pull-up;
> > > +		};
> > >  	};
> > 
> > The new key and power key bindings are very similar, I would prefer if
> > we shared the parsing code and our new DTS looked like:
> > 
> > 		power {
> > 			...
> > 		};
> >  
> > 		resin {
> > 			...
> > 		};
> > 
> > (we can easily keep backward compatibility with power properties being
> > in device node).
> > 
> 
> As discussed here https://patchwork.kernel.org/patch/9751627/ the PON
> block does, in addition to providing power and resin key support also
> handle the restart reason ("reboot bootloader" in Android).
> 
> My interpretation of our conclusion was to come up with a new binding
> for the "pon" and a driver for this block that instantiates the power
> key device.
> 
> It seems reasonable for such binding to describe the two keys, as you
> propose here Dmitry, and instantiates the two input devices based on
> this.

OK, I'll wait for the new driver and binding then.

Thanks.

-- 
Dmitry