Re: [PATCHv2] arm64: dts: stratix10: Add QSPI support for Stratix10

[Thor Thayer]

On 05/15/2018 10:11 AM, Dinh Nguyen wrote:
> On 05/11/2018 11:10 AM, thor.thayer@xxxxxxxxxxxxxxx wrote:
> > From: Thor Thayer <thor.thayer@xxxxxxxxxxxxxxx>
> >
> > Add qspi_clock
> >     The qspi_clk frequency is updated by U-Boot before starting Linux.
> > Add QSPI interface node.
> > Add QSPI flash memory child node.
> >     Setup the QSPI memory in 2 partitions.
> >
> > Signed-off-by: Thor Thayer <thor.thayer@xxxxxxxxxxxxxxx>
> > ---
> > v2  s/_/-/ in qspi-clk
> >      rename flash node.
> >      use partition child node notation<snip>>> +		qspi: spi@ff8d2000 {
> > +			compatible = "cdns,qspi-nor";
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +			reg = <0xff8d2000 0x100>,
> > +			      <0xff900000 0x100000>;
> > +			interrupts = <0 3 4>;
> > +			cdns,fifo-depth = <128>;
> > +			cdns,fifo-width = <4>;
> > +			cdns,trigger-address = <0x00000000>;
> > +			clocks = <&qspi_clk>;
> > +			bus-num = <1>;
>
> I don't you need "bus-num" anymore right? I don't see it getting used
> anywhere in the driver.
>
> Dinh

Yes, I missed that holdover. Thanks, I'll correct that.