Re: [PATCH 2/2] ARM64: dts: meson-axg: remove incorrect i2c ao clock

[Jerome Brunet]

On Wed, 2018-05-16 at 17:52 +0200, Jerome Brunet wrote:
> The clock specified for the i2c AO controller is the one from
> the EE domain, which is incorrect as this controller needs the
> clock from AO clock controller.
> 
> Replace with xtal to avoid claiming an unrelated gate until the
> required clock controller becomes available.

I wrongly assumed the gate was provided by the clkc from AO domain.
Looking at what we did for the GX series, it seems to be provided by the EE
controller with CLKID_AO_I2C.

I'll send a v2 fixing this.
Sorry for the noise

> 
> Fixes: dc6f858e2690 ("ARM64: dts: meson-axg: add I2C DT info for Meson-AXG SoC")
> Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> index b59f341104d7..b82b9d79ec49 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> @@ -1110,7 +1110,12 @@
>  				compatible = "amlogic,meson-axg-i2c";
>  				reg = <0x0 0x05000 0x0 0x20>;
>  				interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
> -				clocks = <&clkc CLKID_I2C>;
> +
> +				/*
> +				 * FIXME: replace with the correct clock when
> +				 * the controller is available
> +				 */
> +				clocks = <&xtal>;
>  				#address-cells = <1>;
>  				#size-cells = <0>;
>  				status = "disabled";