[PATCH 1/2] dt-bindings: phy: Add binding doc for Stingray PCIe PHY

From: Ray Jui
Date: Wed May 16 2018 - 13:51:24 EST


Add binding document for Stingray PCIe PHYs for both PAXB and PAXC based
root complex

Signed-off-by: Ray Jui <ray.jui@xxxxxxxxxxxx>
Reviewed-by: Scott Branden <scott.branden@xxxxxxxxxxxx>
---
.../devicetree/bindings/phy/brcm,sr-pcie-phy.txt | 39 ++++++++++++++++++++++
1 file changed, 39 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.txt

diff --git a/Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.txt b/Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.txt
new file mode 100644
index 0000000..c2eede6
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.txt
@@ -0,0 +1,39 @@
+Broadcom Stingray PCIe PHY
+
+Required properties:
+- compatible: must be "brcm,sr-pcie-phy"
+- brcm,sr-cdru: phandle to the CDRU syscon node
+- brcm,sr-mhb: phandle to the MHB syscon node
+- #phy-cells: Must be 1, denotes the PHY index
+
+For PAXB based root complex, one can have a configuration of up to 8 PHYs
+PHY index goes from 0 to 7
+
+For the internal PAXC based root complex, PHY index is always 8
+
+Example:
+ mhb: syscon@60401000 {
+ compatible = "brcm,sr-mhb", "syscon";
+ reg = <0 0x60401000 0 0x38c>;
+ };
+
+ cdru: syscon@6641d000 {
+ compatible = "brcm,sr-cdru", "syscon";
+ reg = <0 0x6641d000 0 0x400>;
+ };
+
+ pcie_phy: phy {
+ compatible = "brcm,sr-pcie-phy";
+ brcm,sr-cdru = <&cdru>;
+ brcm,sr-mhb = <&mhb>;
+ #phy-cells = <1>;
+ };
+
+ /* users of the PCIe PHY */
+
+ pcie0: pcie@48000000 {
+ ...
+ ...
+ phys = <&pcie_phy 0>;
+ phy-names = "pcie-phy";
+ };
--
2.1.4