[PATCH v2] mailbox: arm_mhu: add support for mhuv2

From: Samarth Parikh
Date: Thu May 17 2018 - 03:08:22 EST


ARM has launched a next version of MHU i.e. MHUv2 with its latest
subsystems. The main change is that the MHUv2 is now a distributed IP
with different peripheral views (registers) for the sender and receiver.

Another main difference is that MHUv1 duplex channels are now split into
simplex/half duplex in MHUv2. MHUv2 has a configurable number of
communication channels. There is a capability register (MSG_NO_CAP) to
find out how many channels are available in a system.

The register offsets have also changed for STAT, SET & CLEAR registers
from 0x0, 0x8 & 0x10 in MHUv1 to 0x0, 0xC & 0x8 in MHUv2 respectively.

0x0 0x4 0x8 0xC 0x1F
------------------------....-----
| STAT | | | SET | | |
------------------------....-----
Transmit Channel

0x0 0x4 0x8 0xC 0x1F
------------------------....-----
| STAT | | CLR | | | |
------------------------....-----
Receive Channel

The MHU controller can request the receiver to wake-up and once the
request is removed, the receiver may go back to sleep, but the MHU
itself does not actively puts a receiver to sleep.

So, in order to wake-up the receiver when the sender wants to send data,
the sender has to set ACCESS_REQUEST register first in order to wake-up
receiver, state of which can be detected using ACCESS_READY register.
ACCESS_REQUEST has an offset of 0xF88 & ACCESS_READY has an offset
of 0xF8C and are accessible only on any sender channel.

This patch adds necessary changes in a new file required to support the
latest MHUv2 controller. This patch also need an update in DT binding for
ARM MHUv2 as we need a second register base (tx base) which would be used
as the send channel base.

Signed-off-by: Samarth Parikh <samarth.parikh@xxxxxxx>
---
drivers/mailbox/Kconfig | 9 ++
drivers/mailbox/Makefile | 2 +
drivers/mailbox/arm_mhu_v2.c | 301 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 312 insertions(+)
create mode 100644 drivers/mailbox/arm_mhu_v2.c

diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
index a2bb274..416bc78 100644
--- a/drivers/mailbox/Kconfig
+++ b/drivers/mailbox/Kconfig
@@ -15,6 +15,15 @@ config ARM_MHU
The controller has 3 mailbox channels, the last of which can be
used in Secure mode only.

+config ARM_MHU_V2
+ tristate "ARM MHUv2 Mailbox"
+ depends on ARM_AMBA
+ help
+ Say Y here if you want to build the ARM MHUv2 controller driver.
+ The controller is a distributed IP with different peripheral
+ views (registers) for the sender and receiver & has 3 mailbox
+ channels, the last of which can be used in Secure mode only.
+
config PLATFORM_MHU
tristate "Platform MHU Mailbox"
depends on OF
diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
index cc23c3a..ae899a9 100644
--- a/drivers/mailbox/Makefile
+++ b/drivers/mailbox/Makefile
@@ -7,6 +7,8 @@ obj-$(CONFIG_MAILBOX_TEST) += mailbox-test.o

obj-$(CONFIG_ARM_MHU) += arm_mhu.o

+obj-$(CONFIG_ARM_MHU_V2) += arm_mhu_v2.o
+
obj-$(CONFIG_PLATFORM_MHU) += platform_mhu.o

obj-$(CONFIG_PL320_MBOX) += pl320-ipc.o
diff --git a/drivers/mailbox/arm_mhu_v2.c b/drivers/mailbox/arm_mhu_v2.c
new file mode 100644
index 0000000..c90725b
--- /dev/null
+++ b/drivers/mailbox/arm_mhu_v2.c
@@ -0,0 +1,301 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 ARM Ltd.
+ * Author: Samarth Parikh <samarth.parikh@xxxxxxx>
+ *
+ */
+
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/amba/bus.h>
+#include <linux/mailbox_controller.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+
+#define MHU_V2_REG_STAT_OFS 0x0
+#define MHU_V2_REG_CLR_OFS 0x8
+#define MHU_V2_REG_SET_OFS 0xC
+#define MHU_V2_REG_MSG_NO_CAP_OFS 0xF80
+#define MHU_V2_REG_ACC_REQ_OFS 0xF88
+#define MHU_V2_REG_ACC_RDY_OFS 0xF8C
+
+#define MHU_V2_LP_OFFSET 0x20
+#define MHU_V2_HP_OFFSET 0x0
+
+#define MHU_V2_CHANS 3
+
+#define mbox_to_mhuv2_drv_data(c) container_of(c, struct mhuv2_drv_data, mbox)
+
+enum mhuv2_regs {
+ MHU_V2_REG_STAT,
+ MHU_V2_REG_SET,
+ MHU_V2_REG_CLR,
+ MHU_V2_REG_END
+};
+
+enum mhuv2_access_regs {
+ MHU_V2_REG_MSG_NO_CAP,
+ MHU_V2_REG_ACC_REQ,
+ MHU_V2_REG_ACC_RDY,
+ MHU_V2_REG_ACC_END
+};
+
+enum mhuv2_channels {
+ MHU_V2_CHAN_LOW,
+ MHU_V2_CHAN_HIGH,
+ MHU_V2_CHAN_SEC,
+ MHU_V2_CHAN_END
+};
+
+/**
+ * ARM MHUv2 Mailbox device specific data
+ *
+ * @regs: MHUv2 specific array of register offset for STAT, SET & CLEAR
+ * registers.
+ * @chans: MHUv2 specific array of channel offset for Low
+ * Priority, High Priority & Secure channels.
+ * @acc_regs: An array of access register offsets.
+ */
+struct mhuv2_dev_data {
+ int regs[MHU_V2_REG_END]; /* STAT, SET, CLEAR */
+ int chans[MHU_V2_CHAN_END]; /* LP, HP, Sec */
+ int acc_regs[MHU_V2_REG_ACC_END];
+};
+
+/**
+ * ARM MHUv2 link specific data
+ *
+ * @irq: MHUv2 receive channel IRQ number
+ * @tx_reg: Transmit channel register
+ * @rx_reg: Receive channel register
+ * @pchan: No. of physical channels
+ */
+struct mhuv2_link {
+ unsigned int irq;
+ void __iomem *tx_reg;
+ void __iomem *rx_reg;
+ unsigned int pchan;
+};
+
+/**
+ * ARM MHUv2 Mailbox driver specific data
+ *
+ * @mlink: MHUv2 link specific data
+ * @chan: Mbox specific data
+ * @mbox: Mbox controller specific data
+ * @drvdata: MHUv2 device specific data
+ */
+struct mhuv2_drv_data {
+ struct mhuv2_link mlink[MHU_V2_CHANS];
+ struct mbox_chan chan[MHU_V2_CHANS];
+ struct mbox_controller mbox;
+ const struct mhuv2_dev_data *drvdata;
+};
+
+static irqreturn_t mhuv2_rx_interrupt(int irq, void *p)
+{
+ struct mbox_chan *chan = p;
+ struct mhuv2_link *mlink = chan->con_priv;
+ struct mhuv2_drv_data *mhu = mbox_to_mhuv2_drv_data(chan->mbox);
+ const struct mhuv2_dev_data *mdata = mhu->drvdata;
+ u32 val;
+
+ val = readl_relaxed(mlink->rx_reg + mdata->regs[MHU_V2_REG_STAT]);
+ if (!val)
+ return IRQ_NONE;
+
+ mbox_chan_received_data(chan, (void *)&val);
+ writel_relaxed(val, mlink->rx_reg + mdata->regs[MHU_V2_REG_CLR]);
+ return IRQ_HANDLED;
+}
+
+static bool mhuv2_last_tx_done(struct mbox_chan *chan)
+{
+ struct mhuv2_link *mlink = chan->con_priv;
+ struct mhuv2_drv_data *mhu = mbox_to_mhuv2_drv_data(chan->mbox);
+ const struct mhuv2_dev_data *mdata = mhu->drvdata;
+ u32 val = readl_relaxed(mlink->tx_reg + mdata->regs[MHU_V2_REG_STAT]);
+
+ return (val == 0);
+}
+
+static int mhuv2_send_data(struct mbox_chan *chan, void *data)
+{
+ struct mhuv2_link *mlink = chan->con_priv;
+ struct mhuv2_drv_data *mhu = mbox_to_mhuv2_drv_data(chan->mbox);
+ const struct mhuv2_dev_data *mdata = mhu->drvdata;
+ u32 *arg = data;
+
+ writel_relaxed(*arg, mlink->tx_reg + mdata->regs[MHU_V2_REG_SET]);
+ return 0;
+}
+
+static int mhuv2_startup(struct mbox_chan *chan)
+{
+ struct mhuv2_link *mlink = chan->con_priv;
+ struct mhuv2_drv_data *mhu = mbox_to_mhuv2_drv_data(chan->mbox);
+ const struct mhuv2_dev_data *mdata = mhu->drvdata;
+ u32 val;
+ int ret;
+
+ writel_relaxed(0x1, mlink->tx_reg
+ + (mdata->acc_regs[MHU_V2_REG_ACC_REQ]
+ - (mdata->chans[mlink->pchan])));
+
+ val = readl_relaxed(mlink->tx_reg + mdata->regs[MHU_V2_REG_STAT]);
+ writel_relaxed(val, mlink->tx_reg + mdata->regs[MHU_V2_REG_CLR]);
+ ret = request_irq(mlink->irq, mhuv2_rx_interrupt,
+ IRQF_SHARED, "mhuv2_link", chan);
+ if (ret) {
+ dev_err(chan->mbox->dev,
+ "unable to acquire IRQ %d\n", mlink->irq);
+ return ret;
+ }
+ return 0;
+}
+
+static void mhuv2_shutdown(struct mbox_chan *chan)
+{
+ struct mhuv2_link *mlink = chan->con_priv;
+ struct mhuv2_drv_data *mhu = mbox_to_mhuv2_drv_data(chan->mbox);
+ const struct mhuv2_dev_data *mdata = mhu->drvdata;
+
+ writel_relaxed(0x0, mlink->tx_reg
+ + (mdata->acc_regs[MHU_V2_REG_ACC_REQ]
+ - (mdata->chans[mlink->pchan])));
+
+ free_irq(mlink->irq, chan);
+}
+
+static const struct mbox_chan_ops mhuv2_ops = {
+ .send_data = mhuv2_send_data,
+ .startup = mhuv2_startup,
+ .shutdown = mhuv2_shutdown,
+ .last_tx_done = mhuv2_last_tx_done,
+};
+
+static int mhuv2_probe(struct amba_device *adev, const struct amba_id *id)
+{
+ int i, err, irq;
+ struct mhuv2_drv_data *mhu;
+ struct device *dev = &adev->dev;
+ void __iomem *rx_base;
+ void __iomem *tx_base;
+ const struct device_node *np = dev->of_node;
+ const struct mhuv2_dev_data *mdata = id->data;
+ unsigned int pchans;
+
+ if (!mdata) {
+ dev_err(dev, "device data not found\n");
+ return -EINVAL;
+ }
+
+ /* Allocate memory for device */
+ mhu = devm_kzalloc(dev, sizeof(*mhu), GFP_KERNEL);
+ if (!mhu)
+ return -ENOMEM;
+
+ rx_base = of_iomap((struct device_node *)np, 0);
+ if (!rx_base) {
+ dev_err(dev, "failed to map rx registers\n");
+ return -ENOMEM;
+ }
+
+ tx_base = of_iomap((struct device_node *)np, 1);
+ if (!tx_base) {
+ dev_err(dev, "failed to map tx registers\n");
+ return -ENOMEM;
+ }
+
+ pchans = readl_relaxed(tx_base
+ + mdata->acc_regs[MHU_V2_REG_MSG_NO_CAP]);
+ if (pchans == 0 || pchans > MHU_V2_CHANS) {
+ dev_err(dev, "invalid number of channels %d\n", pchans);
+ iounmap(tx_base);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < pchans; i++) {
+ mhu->chan[i].con_priv = &mhu->mlink[i];
+ mhu->mlink[i].pchan = i;
+ irq = mhu->mlink[i].irq = adev->irq[i];
+
+ if (irq <= 0) {
+ dev_err(dev, "no IRQ found for channel %d\n", i);
+ iounmap(tx_base);
+ return -EINVAL;
+ }
+
+ mhu->mlink[i].rx_reg = rx_base + mdata->chans[i];
+ mhu->mlink[i].tx_reg = tx_base + mdata->chans[i];
+ }
+
+ mhu->mbox.dev = dev;
+ mhu->mbox.chans = &mhu->chan[0];
+ mhu->mbox.num_chans = pchans;
+ mhu->mbox.ops = &mhuv2_ops;
+ mhu->mbox.txdone_irq = false;
+ mhu->mbox.txdone_poll = true;
+ mhu->mbox.txpoll_period = 1;
+ mhu->drvdata = mdata;
+
+ amba_set_drvdata(adev, mhu);
+
+ err = mbox_controller_register(&mhu->mbox);
+ if (err) {
+ dev_err(dev, "failed to register mailboxes %d\n", err);
+ iounmap(tx_base);
+ return err;
+ }
+
+ dev_info(dev, "ARM MHUv2 Mailbox driver registered\n");
+ return 0;
+}
+
+static int mhuv2_remove(struct amba_device *adev)
+{
+ struct mhuv2_drv_data *mhu = amba_get_drvdata(adev);
+
+ mbox_controller_unregister(&mhu->mbox);
+ return 0;
+}
+
+static struct mhuv2_dev_data arm_mhuv2_data = {
+ .regs = { MHU_V2_REG_STAT_OFS, MHU_V2_REG_SET_OFS, MHU_V2_REG_CLR_OFS },
+ .chans = { MHU_V2_LP_OFFSET, MHU_V2_HP_OFFSET },
+ .acc_regs = { MHU_V2_REG_MSG_NO_CAP_OFS, MHU_V2_REG_ACC_REQ_OFS,
+ MHU_V2_REG_ACC_RDY_OFS },
+};
+
+static struct amba_id mhuv2_ids[] = {
+ {
+ .id = 0x4b0d1,
+ .mask = 0xfffff,
+ .data = (void *)&arm_mhuv2_data,
+ },
+ {
+ .id = 0xbb0d1,
+ .mask = 0xfffff,
+ .data = (void *)&arm_mhuv2_data,
+ },
+ { 0, 0 },
+};
+MODULE_DEVICE_TABLE(amba, mhuv2_ids);
+
+static struct amba_driver arm_mhuv2_driver = {
+ .drv = {
+ .name = "mhuv2",
+ },
+ .id_table = mhuv2_ids,
+ .probe = mhuv2_probe,
+ .remove = mhuv2_remove,
+};
+module_amba_driver(arm_mhuv2_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("ARM MHUv2 Driver");
+MODULE_AUTHOR("Samarth Parikh <samarthp@xxxxxxxxx>");
--
2.7.4