Re: [v0 2/2] cpufreq: qcom-fw: Add support for QCOM cpufreq FW driver
From: Amit Kucheria
Date: Thu May 17 2018 - 05:30:30 EST
On Thu, May 17, 2018 at 12:30 PM, Taniya Das <tdas@xxxxxxxxxxxxxx> wrote:
> The CPUfreq FW present in some QCOM chipsets offloads the steps necessary
> for hanging the frequency of CPUs. The driver implements the cpufreq driver
s/hanging/changing :-)
> interface for this firmware.
>
> Signed-off-by: Taniya Das <tdas@xxxxxxxxxxxxxx>
> ---
> drivers/cpufreq/Kconfig.arm | 9 ++
> drivers/cpufreq/Makefile | 1 +
> drivers/cpufreq/qcom-cpufreq-fw.c | 318 ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 328 insertions(+)
> create mode 100644 drivers/cpufreq/qcom-cpufreq-fw.c
>
> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> index 96b35b8..a50aa6e 100644
> --- a/drivers/cpufreq/Kconfig.arm
> +++ b/drivers/cpufreq/Kconfig.arm
> @@ -301,3 +301,12 @@ config ARM_PXA2xx_CPUFREQ
> This add the CPUFreq driver support for Intel PXA2xx SOCs.
>
> If in doubt, say N.
> +
> +config ARM_QCOM_CPUFREQ_FW
> + tristate "QCOM CPUFreq FW driver"
> + help
> + Support for the CPUFreq FW driver.
> + The CPUfreq FW preset in some QCOM chipsets offloads the steps
> + necessary for changing the frequency of CPUs. The driver
> + implements the cpufreq driver interface for this firmware.
> + Say Y if you want to support CPUFreq FW.
> diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
> index 8d24ade..a3edbce 100644
> --- a/drivers/cpufreq/Makefile
> +++ b/drivers/cpufreq/Makefile
> @@ -85,6 +85,7 @@ obj-$(CONFIG_ARM_TEGRA124_CPUFREQ) += tegra124-cpufreq.o
> obj-$(CONFIG_ARM_TEGRA186_CPUFREQ) += tegra186-cpufreq.o
> obj-$(CONFIG_ARM_TI_CPUFREQ) += ti-cpufreq.o
> obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ) += vexpress-spc-cpufreq.o
> +obj-$(CONFIG_ARM_QCOM_CPUFREQ_FW) += qcom-cpufreq-fw.o
>
>
> ##################################################################################
> diff --git a/drivers/cpufreq/qcom-cpufreq-fw.c b/drivers/cpufreq/qcom-cpufreq-fw.c
> new file mode 100644
> index 0000000..67996d5
> --- /dev/null
> +++ b/drivers/cpufreq/qcom-cpufreq-fw.c
> @@ -0,0 +1,318 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/cpufreq.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/of_platform.h>
> +
> +#define INIT_RATE 300000000UL
> +#define XO_RATE 19200000UL
> +#define LUT_MAX_ENTRIES 40U
> +#define CORE_COUNT_VAL(val) ((val & GENMASK(18, 16)) >> 16)
> +#define LUT_ROW_SIZE 32
> +
> +struct cpufreq_qcom {
> + struct cpufreq_frequency_table *table;
> + struct device *dev;
> + void __iomem *perf_base;
> + void __iomem *lut_base;
> + cpumask_t related_cpus;
> + unsigned int max_cores;
> +};
> +
> +static struct cpufreq_qcom *qcom_freq_domain_map[NR_CPUS];
> +
> +static int
> +qcom_cpufreq_fw_target_index(struct cpufreq_policy *policy, unsigned int index)
> +{
> + struct cpufreq_qcom *c = policy->driver_data;
> +
> + if (index >= LUT_MAX_ENTRIES) {
> + dev_err(c->dev,
> + "Passing an index (%u) that's greater than max (%d)\n",
> + index, LUT_MAX_ENTRIES - 1);
> + return -EINVAL;
> + }
> +
> + writel_relaxed(index, c->perf_base);
> +
> + /* Make sure the write goes through before proceeding */
> + mb();
> + return 0;
> +}
> +
> +static unsigned int qcom_cpufreq_fw_get(unsigned int cpu)
> +{
> + struct cpufreq_qcom *c;
> + unsigned int index;
> +
> + c = qcom_freq_domain_map[cpu];
> + if (!c)
> + return -ENODEV;
> +
> + index = readl_relaxed(c->perf_base);
> + index = min(index, LUT_MAX_ENTRIES - 1);
> +
> + return c->table[index].frequency;
> +}
> +
> +static int qcom_cpufreq_fw_cpu_init(struct cpufreq_policy *policy)
> +{
> + struct cpufreq_qcom *c;
> + int ret;
> +
> + c = qcom_freq_domain_map[policy->cpu];
> + if (!c) {
> + pr_err("No scaling support for CPU%d\n", policy->cpu);
> + return -ENODEV;
> + }
> +
> + cpumask_copy(policy->cpus, &c->related_cpus);
> +
> + policy->table = c->table;
> + policy->driver_data = c;
> +
> + return ret;
> +}
> +
> +static struct freq_attr *qcom_cpufreq_fw_attr[] = {
> + &cpufreq_freq_attr_scaling_available_freqs,
> + &cpufreq_freq_attr_scaling_boost_freqs,
> + NULL
> +};
> +
> +static struct cpufreq_driver cpufreq_qcom_fw_driver = {
> + .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK |
> + CPUFREQ_HAVE_GOVERNOR_PER_POLICY,
> + .verify = cpufreq_generic_frequency_table_verify,
> + .target_index = qcom_cpufreq_fw_target_index,
> + .get = qcom_cpufreq_fw_get,
> + .init = qcom_cpufreq_fw_cpu_init,
> + .name = "qcom-cpufreq-fw",
> + .attr = qcom_cpufreq_fw_attr,
> + .boost_enabled = true,
> +};
> +
> +static int qcom_read_lut(struct platform_device *pdev,
> + struct cpufreq_qcom *c)
> +{
> + struct device *dev = &pdev->dev;
> + u32 data, src, lval, i, core_count, prev_cc = 0;
Get rid of prev_cc variable initialisation here and in other places
through out the code
> +
> + c->table = devm_kcalloc(dev, LUT_MAX_ENTRIES + 1,
> + sizeof(*c->table), GFP_KERNEL);
> + if (!c->table)
> + return -ENOMEM;
> +
> + for (i = 0; i < LUT_MAX_ENTRIES; i++) {
> + data = readl_relaxed(c->lut_base + i * LUT_ROW_SIZE);
> + src = ((data & GENMASK(31, 30)) >> 30);
> + lval = (data & GENMASK(7, 0));
> + core_count = CORE_COUNT_VAL(data);
> +
> + if (!src)
> + c->table[i].frequency = INIT_RATE / 1000;
> + else
> + c->table[i].frequency = XO_RATE * lval / 1000;
> +
> + c->table[i].driver_data = c->table[i].frequency;
> +
> + dev_dbg(dev, "index=%d freq=%d, core_count %d\n",
> + i, c->table[i].frequency, core_count);
> +
> + if (core_count != c->max_cores)
> + c->table[i].frequency = CPUFREQ_ENTRY_INVALID;
> +
> + /*
> + * Two of the same frequencies with the same core counts means
> + * end of table.
> + */
> + if (i > 0 && c->table[i - 1].driver_data ==
> + c->table[i].driver_data
> + && prev_cc == core_count) {
> + struct cpufreq_frequency_table *prev = &c->table[i - 1];
> +
> + if (prev->frequency == CPUFREQ_ENTRY_INVALID) {
> + prev->flags = CPUFREQ_BOOST_FREQ;
> + prev->frequency = prev->driver_data;
> + }
> +
> + break;
> + }
> + prev_cc = core_count;
> + }
> + c->table[i].frequency = CPUFREQ_TABLE_END;
> +
> + return 0;
> +}
> +
> +static int qcom_get_related_cpus(struct device_node *np, struct cpumask *m)
> +{
> + struct device_node *dev_phandle;
> + struct device *cpu_dev;
> + int cpu, i = 0, ret = -ENOENT;
> +
> + dev_phandle = of_parse_phandle(np, "qcom,cpulist", i++);
> + while (dev_phandle) {
> + for_each_possible_cpu(cpu) {
> + cpu_dev = get_cpu_device(cpu);
> + if (cpu_dev && cpu_dev->of_node == dev_phandle) {
> + cpumask_set_cpu(cpu, m);
> + ret = 0;
> + break;
> + }
> + }
> + dev_phandle = of_parse_phandle(np, "qcom,cpulist", i++);
> + }
> +
> + return ret;
> +}
> +
> +static int qcom_cpu_resources_init(struct platform_device *pdev,
> + struct device_node *np)
> +{
> + struct cpufreq_qcom *c;
> + struct resource res;
> + struct device *dev = &pdev->dev;
> + void __iomem *en_base;
> + int cpu, index = 0, ret;
> +
> + c = devm_kzalloc(dev, sizeof(*c), GFP_KERNEL);
Check if memory allocated successfully?
> +
> + res = platform_get_resource_byname(dev, IORESOURCE_MEM, "en_base");
> + if (!res) {
> + dev_err(dev, "Enable base not defined for %s\n", np->name);
> + return ret;
> + }
This is not going to build. Did you build-test this on a 4.17-rc kenel ?
> +
> + en_base = devm_ioremap(dev, res->start, resource_size(res));
> + if (!en_base) {
> + dev_err(dev, "Unable to map %s en-base\n", np->name);
> + return -ENOMEM;
> + }
> +
> + /* FW should be enabled state to proceed */
> + if (!(readl_relaxed(en_base) & 0x1)) {
> + dev_err(dev, "%s firmware not enabled\n", np->name);
> + return -ENODEV;
> + }
> +
> + devm_iounmap(&pdev->dev, en_base);
> +
> + index = of_property_match_string(np, "reg-names", "perf_base");
> + if (index < 0)
> + return index;
> +
> + if (of_address_to_resource(np, index, &res))
> + return -ENOMEM;
> +
> + c->perf_base = devm_ioremap(dev, res.start, resource_size(&res));
> + if (!c->perf_base) {
> + dev_err(dev, "Unable to map %s perf-base\n", np->name);
> + return -ENOMEM;
> + }
> +
> + index = of_property_match_string(np, "reg-names", "lut_base");
> + if (index < 0)
> + return index;
> +
> + if (of_address_to_resource(np, index, &res))
> + return -ENOMEM;
> +
> + c->lut_base = devm_ioremap(dev, res.start, resource_size(&res));
> + if (!c->lut_base) {
> + dev_err(dev, "Unable to map %s lut-base\n", np->name);
> + return -ENOMEM;
> + }
> +
> + ret = qcom_get_related_cpus(np, &c->related_cpus);
> + if (ret) {
> + dev_err(dev, "%s failed to get core phandles\n", np->name);
> + return ret;
> + }
> +
> + c->max_cores = cpumask_weight(&c->related_cpus);
> +
> + ret = qcom_read_lut(pdev, c);
> + if (ret) {
> + dev_err(dev, "%s failed to read LUT\n", np->name);
> + return ret;
> + }
> +
> + for_each_cpu(cpu, &c->related_cpus)
> + qcom_freq_domain_map[cpu] = c;
> +
> + return 0;
> +}
> +
> +static int qcom_resources_init(struct platform_device *pdev)
> +{
> + struct device_node *np;
> + int ret = -ENODEV;
> +
> + for_each_available_child_of_node(pdev->dev.of_node, np) {
> + if (of_device_is_compatible(np, "cpufreq")) {
> + ret = qcom_cpu_resources_init(pdev, np);
> + if (ret)
> + return ret;
> + }
> + }
> +
> + return ret;
> +}
> +
> +static int qcom_cpufreq_fw_driver_probe(struct platform_device *pdev)
> +{
> + int rc = 0;
> +
> + /* Get the bases of cpufreq for domains */
> + rc = qcom_resources_init(pdev);
> + if (rc) {
> + dev_err(&pdev->dev, "CPUFreq resource init failed\n");
> + return rc;
> + }
> +
> + rc = cpufreq_register_driver(&cpufreq_qcom_fw_driver);
> + if (rc) {
> + dev_err(&pdev->dev, "CPUFreq FW driver failed to register\n");
> + return rc;
> + }
> +
> + dev_info(&pdev->dev, "QCOM CPUFreq FW driver inited\n");
> +
> + return 0;
> +}
> +
> +static const struct of_device_id match_table[] = {
> + { .compatible = "qcom,cpufreq-fw" },
> + {}
> +};
> +
> +static struct platform_driver qcom_cpufreq_fw_driver = {
> + .probe = qcom_cpufreq_fw_driver_probe,
> + .driver = {
> + .name = "qcom-cpufreq-fw",
> + .of_match_table = match_table,
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +static int __init qcom_cpufreq_fw_init(void)
> +{
> + return platform_driver_register(&qcom_cpufreq_fw_driver);
> +}
> +subsys_initcall(qcom_cpufreq_fw_init);
> +
> +static void __exit qcom_cpufreq_fw_exit(void)
> +{
> + platform_driver_unregister(&qcom_cpufreq_fw_driver);
> +}
> +module_exit(qcom_cpufreq_fw_exit);
> +
> +MODULE_DESCRIPTION("QCOM CPU Frequency FW");
> +MODULE_LICENSE("GPL v2");
> --
> Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
> of the Code Aurora Forum, hosted by the Linux Foundation.
>