Re: [PATCH v2 2/2] powerpc/32be: use stmw/lmw for registers save/restore in asm

[Benjamin Herrenschmidt]

On Thu, 2018-05-17 at 22:10 +1000, Michael Ellerman wrote:
> Christophe Leroy <christophe.leroy@xxxxxx> writes:
> > arch/powerpc/Makefile activates -mmultiple on BE PPC32 configs
> > in order to use multiple word instructions in functions entry/exit
> 
> True, though that could be a lot simpler because the MULTIPLEWORD value
> is only used for PPC32, which is always big endian. I'll send a patch
> for that.

There have been known cases of 4xx LE ports though none ever made it
upstream ...

> > The patch does the same for the asm parts, for consistency
> > 
> > On processors like the 8xx on which insn fetching is pretty slow,
> > this speeds up registers save/restore
> 
> OK. I've always heard that they should be avoided, but that's coming
> from 64-bit land.
> 
> I guess we've been enabling this for all 32-bit targets for ever so it
> must be a reasonable option.
> 
> > Signed-off-by: Christophe Leroy <christophe.leroy@xxxxxx>
> > ---
> >  v2: Swapped both patches in the serie to reduce number of impacted
> >      lines and added the same modification in ppc_save_regs()
> > 
> >  arch/powerpc/include/asm/ppc_asm.h  |  5 +++++
> >  arch/powerpc/kernel/misc.S          | 10 ++++++++++
> >  arch/powerpc/kernel/ppc_save_regs.S |  4 ++++
> >  3 files changed, 19 insertions(+)
> > 
> > diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
> > index 13f7f4c0e1ea..4bb765d0b758 100644
> > --- a/arch/powerpc/include/asm/ppc_asm.h
> > +++ b/arch/powerpc/include/asm/ppc_asm.h
> > @@ -80,11 +80,16 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
> >  #else
> >  #define SAVE_GPR(n, base)	stw	n,GPR0+4*(n)(base)
> >  #define REST_GPR(n, base)	lwz	n,GPR0+4*(n)(base)
> > +#ifdef CONFIG_CPU_BIG_ENDIAN
> > +#define SAVE_NVGPRS(base)	stmw	13, GPR0+4*13(base)
> > +#define REST_NVGPRS(base)	lmw	13, GPR0+4*13(base)
> > +#else
> >  #define SAVE_NVGPRS(base)	SAVE_GPR(13, base); SAVE_8GPRS(14, base); \
> >  				SAVE_10GPRS(22, base)
> >  #define REST_NVGPRS(base)	REST_GPR(13, base); REST_8GPRS(14, base); \
> >  				REST_10GPRS(22, base)
> 
> There is no 32-bit little endian, so this is basically dead code now.
> 
> Maybe there'll be a 32-bit LE port one day, but if so we can put the
> code back then.
> 
> So I'll just drop the else case.
> 
> >  #endif
> > +#endif
> >  
> >  #define SAVE_2GPRS(n, base)	SAVE_GPR(n, base); SAVE_GPR(n+1, base)
> >  #define SAVE_4GPRS(n, base)	SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base)
> > diff --git a/arch/powerpc/kernel/misc.S b/arch/powerpc/kernel/misc.S
> > index 746ee0320ad4..a316d90a5c26 100644
> > --- a/arch/powerpc/kernel/misc.S
> > +++ b/arch/powerpc/kernel/misc.S
> > @@ -49,6 +49,10 @@ _GLOBAL(setjmp)
> >  	PPC_STL	r0,0(r3)
> >  	PPC_STL	r1,SZL(r3)
> >  	PPC_STL	r2,2*SZL(r3)
> > +#if defined(CONFIG_PPC32) && defined(CONFIG_CPU_BIG_ENDIAN)
> 
> And this could just be:
> 
> #ifdef CONFIG_PPC32
> 
> > +	mfcr	r12
> > +	stmw	r12, 3*SZL(r3)
> > +#else
> >  	mfcr	r0
> >  	PPC_STL	r0,3*SZL(r3)
> >  	PPC_STL	r13,4*SZL(r3)
> > @@ -70,10 +74,15 @@ _GLOBAL(setjmp)
> >  	PPC_STL	r29,20*SZL(r3)
> >  	PPC_STL	r30,21*SZL(r3)
> >  	PPC_STL	r31,22*SZL(r3)
> > +#endif
> 
> It's a pity to end up with this basically split in half by ifdefs for
> 32/64-bit, but maybe we can clean that up later.
> 
> cheers