[PATCH 1/6] coresight: remove CORESIGHT_LINKS_AND_SINKS dependencies and selections
From: Kim Phillips
Date: Thu May 17 2018 - 20:25:26 EST
A coresight topology doesn't need to include links, i.e., a source can
be directly connected to a sink. As such, selecting and/or depending on
LINKS_AND_SINKS is no longer needed.
Suggested-by: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
Cc: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
Signed-off-by: Kim Phillips <kim.phillips@xxxxxxx>
---
drivers/hwtracing/coresight/Kconfig | 7 -------
1 file changed, 7 deletions(-)
diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig
index ef9cb3c164e1..83fb78651ef9 100644
--- a/drivers/hwtracing/coresight/Kconfig
+++ b/drivers/hwtracing/coresight/Kconfig
@@ -23,7 +23,6 @@ config CORESIGHT_LINKS_AND_SINKS
config CORESIGHT_LINK_AND_SINK_TMC
bool "Coresight generic TMC driver"
- depends on CORESIGHT_LINKS_AND_SINKS
help
This enables support for the Trace Memory Controller driver.
Depending on its configuration the device can act as a link (embedded
@@ -33,7 +32,6 @@ config CORESIGHT_LINK_AND_SINK_TMC
config CORESIGHT_SINK_TPIU
bool "Coresight generic TPIU driver"
- depends on CORESIGHT_LINKS_AND_SINKS
help
This enables support for the Trace Port Interface Unit driver,
responsible for bridging the gap between the on-chip coresight
@@ -44,7 +42,6 @@ config CORESIGHT_SINK_TPIU
config CORESIGHT_SINK_ETBV10
bool "Coresight ETBv1.0 driver"
- depends on CORESIGHT_LINKS_AND_SINKS
help
This enables support for the Embedded Trace Buffer version 1.0 driver
that complies with the generic implementation of the component without
@@ -53,7 +50,6 @@ config CORESIGHT_SINK_ETBV10
config CORESIGHT_SOURCE_ETM3X
bool "CoreSight Embedded Trace Macrocell 3.x driver"
depends on !ARM64
- select CORESIGHT_LINKS_AND_SINKS
help
This driver provides support for processor ETM3.x and PTM1.x modules,
which allows tracing the instructions that a processor is executing
@@ -63,7 +59,6 @@ config CORESIGHT_SOURCE_ETM3X
config CORESIGHT_SOURCE_ETM4X
bool "CoreSight Embedded Trace Macrocell 4.x driver"
depends on ARM64
- select CORESIGHT_LINKS_AND_SINKS
help
This driver provides support for the ETM4.x tracer module, tracing the
instructions that a processor is executing. This is primarily useful
@@ -72,7 +67,6 @@ config CORESIGHT_SOURCE_ETM4X
config CORESIGHT_DYNAMIC_REPLICATOR
bool "CoreSight Programmable Replicator driver"
- depends on CORESIGHT_LINKS_AND_SINKS
help
This enables support for dynamic CoreSight replicator link driver.
The programmable ATB replicator allows independent filtering of the
@@ -81,7 +75,6 @@ config CORESIGHT_DYNAMIC_REPLICATOR
config CORESIGHT_STM
bool "CoreSight System Trace Macrocell driver"
depends on (ARM && !(CPU_32v3 || CPU_32v4 || CPU_32v4T)) || ARM64
- select CORESIGHT_LINKS_AND_SINKS
select STM
help
This driver provides support for hardware assisted software
--
2.17.0