[PATCH v6 10/28] x86/asm/entry: annotate interrupt symbols properly

[Jiri Slaby]

* annotate functions properly by SYM_CODE_START, SYM_CODE_START_LOCAL*
  and SYM_CODE_END -- these are not C-like functions, so we have to
  annotate them using CODE.
* use SYM_INNER_LABEL* for labels being in the middle of other functions

[v4] alignments preserved

Signed-off-by: Jiri Slaby <jslaby@xxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Ingo Molnar <mingo@xxxxxxxxxx>
Cc: "H. Peter Anvin" <hpa@xxxxxxxxx>
Cc: <x86@xxxxxxxxxx>
---
 arch/x86/entry/entry_32.S | 15 ++++++++-------
 arch/x86/entry/entry_64.S |  9 ++++-----
 2 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index 030fbeba5f4a..4b80b2fb4de1 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -340,7 +340,7 @@ ret_from_intr:
 	cmpl	$USER_RPL, %eax
 	jb	resume_kernel			# not returning to v8086 or userspace
 
-ENTRY(resume_userspace)
+SYM_INNER_LABEL_ALIGN(resume_userspace, SYM_L_LOCAL)
 	DISABLE_INTERRUPTS(CLBR_ANY)
 	TRACE_IRQS_OFF
 	movl	%esp, %eax
@@ -579,10 +579,11 @@ restore_all:
 	INTERRUPT_RETURN
 
 .section .fixup, "ax"
-ENTRY(iret_exc	)
+SYM_CODE_START(iret_exc)
 	pushl	$0				# no error code
 	pushl	$do_iret_error
 	jmp	common_exception
+SYM_CODE_END(iret_exc)
 .previous
 	_ASM_EXTABLE(.Lirq_return, iret_exc)
 
@@ -674,7 +675,7 @@ END(irq_entries_start)
  * so IRQ-flags tracing has to follow that:
  */
 	.p2align CONFIG_X86_L1_CACHE_SHIFT
-common_interrupt:
+SYM_CODE_START_LOCAL(common_interrupt)
 	ASM_CLAC
 	addl	$-0x80, (%esp)			/* Adjust vector into the [-256, -1] range */
 	SAVE_ALL
@@ -683,7 +684,7 @@ common_interrupt:
 	movl	%esp, %eax
 	call	do_IRQ
 	jmp	ret_from_intr
-ENDPROC(common_interrupt)
+SYM_CODE_END(common_interrupt)
 
 #define BUILD_INTERRUPT3(name, nr, fn)	\
 ENTRY(name)				\
@@ -835,7 +836,7 @@ ENTRY(xen_hypervisor_callback)
 
 	jmp	xen_iret_crit_fixup
 
-ENTRY(xen_do_upcall)
+SYM_INNER_LABEL_ALIGN(xen_do_upcall, SYM_L_GLOBAL)
 1:	mov	%esp, %eax
 	call	xen_evtchn_do_upcall
 #ifndef CONFIG_PREEMPT
@@ -920,7 +921,7 @@ ENTRY(page_fault)
 	jmp common_exception
 END(page_fault)
 
-common_exception:
+SYM_CODE_START_LOCAL_NOALIGN(common_exception)
 	/* the function address is in %gs's slot on the stack */
 	pushl	%fs
 	pushl	%es
@@ -950,7 +951,7 @@ common_exception:
 	movl	%esp, %eax			# pt_regs pointer
 	CALL_NOSPEC %edi
 	jmp	ret_from_exception
-END(common_exception)
+SYM_CODE_END(common_exception)
 
 ENTRY(debug)
 	/*
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index 80045cb2f44c..e0798c044055 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -637,7 +637,7 @@ END(interrupt_entry)
 	 * then jump to common_interrupt.
 	 */
 	.p2align CONFIG_X86_L1_CACHE_SHIFT
-common_interrupt:
+SYM_CODE_START_LOCAL(common_interrupt)
 	addq	$-0x80, (%rsp)			/* Adjust vector to [-256, -1] range */
 	call	interrupt_entry
 	UNWIND_HINT_REGS indirect=1
@@ -733,7 +733,7 @@ GLOBAL(restore_regs_and_return_to_kernel)
 	 */
 	INTERRUPT_RETURN
 
-ENTRY(native_iret)
+SYM_INNER_LABEL_ALIGN(native_iret, SYM_L_GLOBAL)
 	UNWIND_HINT_IRET_REGS
 	/*
 	 * Are we returning to a stack segment from the LDT?  Note: in
@@ -744,8 +744,7 @@ ENTRY(native_iret)
 	jnz	native_irq_return_ldt
 #endif
 
-.global native_irq_return_iret
-native_irq_return_iret:
+SYM_INNER_LABEL(native_irq_return_iret, SYM_L_GLOBAL)
 	/*
 	 * This may fault.  Non-paranoid faults on return to userspace are
 	 * handled by fixup_bad_iret.  These include #SS, #GP, and #NP.
@@ -827,7 +826,7 @@ native_irq_return_ldt:
 	 */
 	jmp	native_irq_return_iret
 #endif
-END(common_interrupt)
+SYM_CODE_END(common_interrupt)
 
 /*
  * APIC interrupts.
-- 
2.16.3