[PATCH v3 2/3] arm64: dts: renesas: draak: Describe CVBS input

[Jacopo Mondi]

Describe CVBS video input through analog video decoder ADV7180
connected to video input interface VIN4.

The video input signal path is shared with HDMI video input, and
selected by on-board switches SW-53 and SW-54 with CVBS input selected
by the default switches configuration.

Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
Reviewed-by: Niklas SÃderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>

---
v2 -> v3:
- Add comment to describe the shared input video path
- Add my SoB and Niklas' R-b tags
---
 arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 42 ++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
index 9d73de8..95745fc 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
@@ -142,6 +142,11 @@
 		groups = "usb0";
 		function = "usb0";
 	};
+
+	vin4_pins_cvbs: vin4 {
+		groups = "vin4_data8", "vin4_sync", "vin4_clk";
+		function = "vin4";
+	};
 };

 &i2c0 {
@@ -154,6 +159,23 @@
 		reg = <0x50>;
 		pagesize = <8>;
 	};
+
+	analog-video@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+
+		port {
+			/*
+			 * The VIN4 video input path is shared between
+			 * CVBS and HDMI inputs through SW[49-54] switches.
+			 *
+			 * CVBS is the default selection, link it to VIN4 here.
+			 */
+			adv7180_out: endpoint {
+				remote-endpoint = <&vin4_in>;
+			};
+		};
+	};
 };

 &i2c1 {
@@ -246,3 +268,23 @@
 	timeout-sec = <60>;
 	status = "okay";
 };
+
+&vin4 {
+	pinctrl-0 = <&vin4_pins_cvbs>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			vin4_in: endpoint {
+				remote-endpoint = <&adv7180_out>;
+			};
+		};
+	};
+};
--
2.7.4