[PATCH 4/6] fbdev: omapfb: lcd_ams_delta: use GPIO lookup table

[Janusz Krzysztofik]

Now as the Amstrad Delta board provides GPIO lookup tables, switch from
GPIO numbers to GPIO descriptors and use the table to locate required
GPIO pins.

Declare static variables for storing GPIO descriptors and replace
gpio_ functions with their gpiod_ equivalents. Move GPIO lookup
to the driver probe function so device initialization can be postponed
instead of aborted if the GPIO pin is not yet available.

Pin naming used by the driver should be followed while respective GPIO
lookup table is initialized by a board init code.

Created and tested against linux-4.17-rc3, on top of patch 1/6 "ARM:
OMAP1: ams-delta: add GPIO lookup tables"

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
---
 drivers/video/fbdev/omap/lcd_ams_delta.c | 59 ++++++++++++++------------------
 1 file changed, 26 insertions(+), 33 deletions(-)

diff --git a/drivers/video/fbdev/omap/lcd_ams_delta.c b/drivers/video/fbdev/omap/lcd_ams_delta.c
index a4ee947006c7..19b6425b54be 100644
--- a/drivers/video/fbdev/omap/lcd_ams_delta.c
+++ b/drivers/video/fbdev/omap/lcd_ams_delta.c
@@ -24,11 +24,10 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <linux/gpio/consumer.h>
 #include <linux/lcd.h>
-#include <linux/gpio.h>
 
 #include <mach/hardware.h>
-#include <mach/board-ams-delta.h>
 
 #include "omapfb.h"
 
@@ -41,6 +40,8 @@
 /* LCD class device section */
 
 static int ams_delta_lcd;
+static struct gpio_desc *gpiod_vblen;
+static struct gpio_desc *gpiod_ndisp;
 
 static int ams_delta_lcd_set_power(struct lcd_device *dev, int power)
 {
@@ -99,41 +100,17 @@ static struct lcd_ops ams_delta_lcd_ops = {
 
 /* omapfb panel section */
 
-static const struct gpio _gpios[] = {
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_LCD_VBLEN,
-		.flags	= GPIOF_OUT_INIT_LOW,
-		.label	= "lcd_vblen",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_LCD_NDISP,
-		.flags	= GPIOF_OUT_INIT_LOW,
-		.label	= "lcd_ndisp",
-	},
-};
-
-static int ams_delta_panel_init(struct lcd_panel *panel,
-		struct omapfb_device *fbdev)
-{
-	return gpio_request_array(_gpios, ARRAY_SIZE(_gpios));
-}
-
-static void ams_delta_panel_cleanup(struct lcd_panel *panel)
-{
-	gpio_free_array(_gpios, ARRAY_SIZE(_gpios));
-}
-
 static int ams_delta_panel_enable(struct lcd_panel *panel)
 {
-	gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_NDISP, 1);
-	gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_VBLEN, 1);
+	gpiod_set_value(gpiod_ndisp, 1);
+	gpiod_set_value(gpiod_vblen, 1);
 	return 0;
 }
 
 static void ams_delta_panel_disable(struct lcd_panel *panel)
 {
-	gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_VBLEN, 0);
-	gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_NDISP, 0);
+	gpiod_set_value(gpiod_vblen, 0);
+	gpiod_set_value(gpiod_ndisp, 0);
 }
 
 static struct lcd_panel ams_delta_panel = {
@@ -154,8 +131,6 @@ static struct lcd_panel ams_delta_panel = {
 	.pcd		= 0,
 	.acb		= 37,
 
-	.init		= ams_delta_panel_init,
-	.cleanup	= ams_delta_panel_cleanup,
 	.enable		= ams_delta_panel_enable,
 	.disable	= ams_delta_panel_disable,
 };
@@ -166,9 +141,27 @@ static struct lcd_panel ams_delta_panel = {
 static int ams_delta_panel_probe(struct platform_device *pdev)
 {
 	struct lcd_device *lcd_device = NULL;
-#ifdef CONFIG_LCD_CLASS_DEVICE
 	int ret;
 
+	gpiod_vblen = devm_gpiod_get(&pdev->dev, "vblen", GPIOD_OUT_LOW);
+	if (IS_ERR(gpiod_vblen)) {
+		ret = PTR_ERR(gpiod_vblen);
+		dev_err(&pdev->dev, "VBLEN GPIO request failed (%d)\n", ret);
+		if (ret == -ENODEV || ret == -ENOENT)
+			ret = -EPROBE_DEFER;
+		return ret;
+	}
+
+	gpiod_ndisp = devm_gpiod_get(&pdev->dev, "ndisp", GPIOD_OUT_LOW);
+	if (IS_ERR(gpiod_ndisp)) {
+		ret = PTR_ERR(gpiod_ndisp);
+		dev_err(&pdev->dev, "NDISP GPIO request failed (%d)\n", ret);
+		if (ret == -ENODEV || ret == -ENOENT)
+			ret = -EPROBE_DEFER;
+		return ret;
+	}
+
+#ifdef CONFIG_LCD_CLASS_DEVICE
 	lcd_device = lcd_device_register("omapfb", &pdev->dev, NULL,
 						&ams_delta_lcd_ops);
 
-- 
2.16.1