RE: [PATCH v4 10/22] iommu: introduce device fault data
From: Liu, Yi L
Date: Sun May 20 2018 - 03:22:28 EST
Hi Jacob,
> From: Jacob Pan [mailto:jacob.jun.pan@xxxxxxxxxxxxxxx]
> Sent: Tuesday, April 17, 2018 5:49 AM
> include/linux/iommu.h | 102
> +++++++++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 100 insertions(+), 2 deletions(-)
>
> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
> index e963dbd..8968933 100644
> --- a/include/linux/iommu.h
> +++ b/include/linux/iommu.h
> @@ -49,13 +49,17 @@ struct bus_type;
> struct device;
> struct iommu_domain;
> struct notifier_block;
> +struct iommu_fault_event;
>
> /* iommu fault flags */
> -#define IOMMU_FAULT_READ 0x0
> -#define IOMMU_FAULT_WRITE 0x1
> +#define IOMMU_FAULT_READ (1 << 0)
> +#define IOMMU_FAULT_WRITE (1 << 1)
> +#define IOMMU_FAULT_EXEC (1 << 2)
> +#define IOMMU_FAULT_PRIV (1 << 3)
>
> typedef int (*iommu_fault_handler_t)(struct iommu_domain *,
> struct device *, unsigned long, int, void *);
> +typedef int (*iommu_dev_fault_handler_t)(struct iommu_fault_event *, void *);
>
> struct iommu_domain_geometry {
> dma_addr_t aperture_start; /* First address that can be mapped */
> @@ -264,6 +268,99 @@ struct iommu_device {
> struct device *dev;
> };
>
> +/* Generic fault types, can be expanded IRQ remapping fault */
> +enum iommu_fault_type {
> + IOMMU_FAULT_DMA_UNRECOV = 1, /* unrecoverable fault */
> + IOMMU_FAULT_PAGE_REQ, /* page request fault */
> +};
> +
> +enum iommu_fault_reason {
> + IOMMU_FAULT_REASON_UNKNOWN = 0,
> +
> + /* IOMMU internal error, no specific reason to report out */
> + IOMMU_FAULT_REASON_INTERNAL,
> +
> + /* Could not access the PASID table */
> + IOMMU_FAULT_REASON_PASID_FETCH,
> +
> + /*
> + * PASID is out of range (e.g. exceeds the maximum PASID
> + * supported by the IOMMU) or disabled.
> + */
> + IOMMU_FAULT_REASON_PASID_INVALID,
> +
> + /* Could not access the page directory (Invalid PASID entry) */
> + IOMMU_FAULT_REASON_PGD_FETCH,
> +
> + /* Could not access the page table entry (Bad address) */
> + IOMMU_FAULT_REASON_PTE_FETCH,
> +
> + /* Protection flag check failed */
> + IOMMU_FAULT_REASON_PERMISSION,
> +};
> +
> +/**
> + * struct iommu_fault_event - Generic per device fault data
> + *
> + * - PCI and non-PCI devices
> + * - Recoverable faults (e.g. page request), information based on PCI ATS
> + * and PASID spec.
> + * - Un-recoverable faults of device interest
> + * - DMA remapping and IRQ remapping faults
> +
> + * @type contains fault type.
> + * @reason fault reasons if relevant outside IOMMU driver, IOMMU driver internal
> + * faults are not reported
> + * @addr: tells the offending page address
> + * @pasid: contains process address space ID, used in shared virtual memory(SVM)
> + * @rid: requestor ID
> + * @page_req_group_id: page request group index
> + * @last_req: last request in a page request group
> + * @pasid_valid: indicates if the PRQ has a valid PASID
> + * @prot: page access protection flag, e.g. IOMMU_FAULT_READ,
> IOMMU_FAULT_WRITE
> + * @device_private: if present, uniquely identify device-specific
> + * private data for an individual page request.
> + * @iommu_private: used by the IOMMU driver for storing fault-specific
> + * data. Users should not modify this field before
> + * sending the fault response.
> + */
> +struct iommu_fault_event {
> + enum iommu_fault_type type;
> + enum iommu_fault_reason reason;
> + u64 addr;
> + u32 pasid;
> + u32 page_req_group_id;
> + u32 last_req : 1;
> + u32 pasid_valid : 1;
> + u32 prot;
I think userspace also needs to know the fault type, reason, pasid, addr, goup_id,
prot. So the definition should be included in uapi/Linux/iommu.h.
This comment also applies to "struct page_response_msg". Qemu also wants to
pass the page response to host.
> + u64 device_private;
> + u64 iommu_private;
These two seems to be in kernel driver specific data. May split the iommu_fault_event
definition into two parts. One part for the data required by both driver and userspace.
One part for in kernel driver specific data.
Thanks,
Yi Liu