[media] duplicate code in media drivers

[Gustavo A. R. Silva]

Hi Mauro,

I found some duplicate code with the help of Coccinelle and Coverity. Notice that these are not code patches, they only point out the duplicate code in some media drivers:

diff -u -p drivers/media/pci/bt8xx/dvb-bt8xx.c /tmp/nothing/media/pci/bt8xx/dvb-bt8xx.c
--- drivers/media/pci/bt8xx/dvb-bt8xx.c
+++ /tmp/nothing/media/pci/bt8xx/dvb-bt8xx.c
@@ -389,9 +389,7 @@ static int advbt771_samsung_tdtc9251dh0_
        else if (c->frequency < 600000000)
                bs = 0x08;
        else if (c->frequency < 730000000)
-               bs = 0x08;
        else
-               bs = 0x08;

        pllbuf[0] = 0x61;
        pllbuf[1] = div >> 8;
diff -u -p drivers/media/usb/dvb-usb/dib0700_devices.c /tmp/nothing/media/usb/dvb-usb/dib0700_devices.c
--- drivers/media/usb/dvb-usb/dib0700_devices.c
+++ /tmp/nothing/media/usb/dvb-usb/dib0700_devices.c
@@ -1741,13 +1741,6 @@ static int dib809x_tuner_attach(struct d
        struct dib0700_adapter_state *st = adap->priv;
        struct i2c_adapter *tun_i2c = st->dib8000_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);

-       if (adap->id == 0) {
-               if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL)
-                       return -ENODEV;
-       } else {
-               if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL)
-                       return -ENODEV;
-       }

        st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
        adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096_set_param_override;
diff -u -p drivers/media/dvb-frontends/mb86a16.c /tmp/nothing/media/dvb-frontends/mb86a16.c
--- drivers/media/dvb-frontends/mb86a16.c
+++ /tmp/nothing/media/dvb-frontends/mb86a16.c
@@ -1466,9 +1466,7 @@ static int mb86a16_set_fe(struct mb86a16
                                                        wait_t = (1572864 + state->srate / 2) / state->srate;
                                                if (state->srate < 5000)
                                                        /* FIXME ! , should be a long wait ! */
-                                                       msleep_interruptible(wait_t);
                                                else
-                                                       msleep_interruptible(wait_t);

                                                if (sync_chk(state, &junk) == 0) {
                                                        iq_vt_set(state, 1);
diff -u -p drivers/media/dvb-frontends/au8522_decoder.c /tmp/nothing/media/dvb-frontends/au8522_decoder.c
--- drivers/media/dvb-frontends/au8522_decoder.c
+++ /tmp/nothing/media/dvb-frontends/au8522_decoder.c
@@ -280,14 +280,9 @@ static void setup_decoder_defaults(struc
                        AU8522_TOREGAAGC_REG0E5H_CVBS);
        au8522_writereg(state, AU8522_REG016H, AU8522_REG016H_CVBS);

-       if (is_svideo) {
                /* Despite what the table says, for the HVR-950q we still need
                   to be in CVBS mode for the S-Video input (reason unknown). */
                /* filter_coef_type = 3; */
-               filter_coef_type = 5;
-       } else {
-               filter_coef_type = 5;
-       }

        /* Load the Video Decoder Filter Coefficients */
        for (i = 0; i < NUM_FILTER_COEF; i++) {


I wonder if some of the cases above were intentionally coded that way or some code needs to be removed.

Thanks
--
Gustavo