[PATCH] arm64: dts: stingray: move common board components to stingray-board-base

[Scott Branden]

Move common board components from base bcm958742 dtsi file to new
stingray-board-base dtsi file so they can be shared between many stingray
boards following common design.

Signed-off-by: Scott Branden <scott.branden@xxxxxxxxxxxx>
---
 .../boot/dts/broadcom/stingray/bcm958742-base.dtsi | 35 +--------------
 .../dts/broadcom/stingray/stingray-board-base.dtsi | 51 ++++++++++++++++++++++
 2 files changed, 52 insertions(+), 34 deletions(-)
 create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi

diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
index cacc25e..d74f6df 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
@@ -30,20 +30,9 @@
  *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-#include "stingray.dtsi"
+#include "stingray-board-base.dtsi"
 
 / {
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart0;
-		serial2 = &uart2;
-		serial3 = &uart3;
-	};
-
 	sdio0_vddo_ctrl_reg: sdio0_vddo_ctrl {
 		compatible = "regulator-gpio";
 		regulator-name = "sdio0_vddo_ctrl_reg";
@@ -67,23 +56,6 @@
 	};
 };
 
-&memory { /* Default DRAM banks */
-	reg = <0x00000000 0x80000000 0x0 0x80000000>, /* 2G @ 2G */
-	      <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */
-};
-
-&mdio_mux_iproc {
-	mdio@10 {
-		gphy0: eth-phy@10 {
-			reg = <0x10>;
-		};
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
-
 &pwm {
 	status = "okay";
 };
@@ -111,8 +83,6 @@
 };
 
 &enet {
-	phy-mode = "rgmii-id";
-	phy-handle = <&gphy0>;
 	status = "okay";
 };
 
@@ -133,13 +103,10 @@
 
 &sdio0 {
 	vqmmc-supply = <&sdio0_vddo_ctrl_reg>;
-	non-removable;
-	full-pwr-cycle;
 	status = "okay";
 };
 
 &sdio1 {
 	vqmmc-supply = <&sdio1_vddo_ctrl_reg>;
-	full-pwr-cycle;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi
new file mode 100644
index 0000000..82a2471
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause)
+/*
+ *  Copyright(c) 2016-2018 Broadcom
+ */
+
+#include "stingray.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart0;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&memory { /* Default DRAM banks */
+	reg = <0x00000000 0x80000000 0x0 0x80000000>, /* 2G @ 2G */
+	      <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */
+};
+
+&enet {
+	phy-mode = "rgmii-id";
+	phy-handle = <&gphy0>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&sdio0 {
+	non-removable;
+	full-pwr-cycle;
+};
+
+&sdio1 {
+	full-pwr-cycle;
+};
+
+&mdio_mux_iproc {
+	mdio@10 {
+		gphy0: eth-phy@10 {
+			reg = <0x10>;
+		};
+	};
+};
-- 
2.5.0