Re: [PATCH v6] gpio: dwapb: Add support for 1 interrupt per port A GPIO

[Linus Walleij]

On Fri, May 11, 2018 at 10:31 AM, Phil Edworthy
<phil.edworthy@xxxxxxxxxxx> wrote:

> The DesignWare GPIO IP can be configured for either 1 interrupt or 1
> per GPIO in port A, but the driver currently only supports 1 interrupt.
> See the DesignWare DW_apb_gpio Databook description of the
> 'GPIO_INTR_IO' parameter.
>
> This change allows the driver to work with up to 32 interrupts, it will
> get as many interrupts as specified in the DT 'interrupts' property.
> It doesn't do anything clever with the different interrupts, it just calls
> the same handler used for single interrupt hardware.
>
> Signed-off-by: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>
> ---
> One point to mention is that I have made it possible for users to have
> unconnected interrupts by specifying holes in the list of interrupts. This is
> done by supporting the interrupts-extended DT prop.
> However, I have no use for this and had to hack some test case for this.
> Perhaps the driver should support 1 interrupt or all GPIOa as interrupts?
>
> v6:
>  - Treat DT and ACPI the same as much as possible. Note that we can't use
>    platform_get_irq() to get the DT interrupts as they are in the port
>    sub-node and hence do not have an associated platform device.

I already applied this patch in some version, can you check what is
in my devel branch and send incremental patches on top if
something needs changing?
https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git/commit/?h=devel&id=e6ca26abd37606ba4864f20c85d3fe4a2173b93f

Sorry for not knowing by heart what was applied or when, it's
just too much for me sometimes.

Yours,
Linus Walleij