Re: [PATCH v6 4/6] ARM: dts: Renesas RZ/N1 SoC base device tree file

From: Geert Uytterhoeven
Date: Wed May 23 2018 - 04:18:43 EST


Hi Michel,

On Tue, May 22, 2018 at 12:01 PM, Michel Pollet
<michel.pollet@xxxxxxxxxxxxxx> wrote:
> This adds the Renesas RZ/N1D (Part #R9A06G032) SoC bare
> bone support.
>
> This currently only handles generic parts (gic, architected timer)
> and a UART.
> For simplicity sake, this also relies on the bootloader to set the
> pinctrl and clocks.
>
> Signed-off-by: Michel Pollet <michel.pollet@xxxxxxxxxxxxxx>

Thanks for your patch!

> --- /dev/null
> +++ b/arch/arm/boot/dts/r9a06g032.dtsi
> @@ -0,0 +1,86 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Base Device Tree Source for the Renesas RZ/N1D (R9A06G032)
> + *
> + * Copyright (C) 2018 Renesas Electronics Europe Limited
> + *
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/rzn1-clock.h>
> +
> +/ {
> + compatible = "renesas,r9a06g032", "renesas,rzn1";

Please drop the "renesas,rzn1".


> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&clock RZN1_DIV_CA7>;

I think the clocks property should be moved to the individual CPU nodes.

> +
> + cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0>;
> + };
> +
> + cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <1>;
> + };
> + };

The rest looks OK to me (pending acceptance of the clock bindings).

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds