Re: [PATCH net-next v3 0/7] Add support for QCA8334 switch

[Florian Fainelli]

On 05/22/2018 11:20 PM, Michal VokÃÄ wrote:
> This series basically adds support for a QCA8334 ethernet switch to the
> qca8k driver. It is a four-port variant of the already supported seven
> port QCA8337. Register map is the same for the whole familly and all chips
> have the same device ID.
> 
> Major part of this series enhances the CPU port setting. Currently the CPU
> port is not set to any sensible defaults compatible with the xGMII
> interface. This series forces the CPU port to its maximum bandwidth and
> also allows to adjust the new defaults using fixed-link device tree
> sub-node.
> 
> Alongside these changes I fixed two checkpatch warnings regarding SPDX and
> redundant parentheses.

Looks great, thanks Michal! Do you have any features or things you are
working on that would be added later to the driver?

> 
> Changes in v3:
>  - Rebased on latest net-next/master.
>  - Corrected fixed-link documentation.
> 
> Michal VokÃÄ (7):
>   net: dsa: qca8k: Add QCA8334 binding documentation
>   net: dsa: qca8k: Add support for QCA8334 switch
>   net: dsa: qca8k: Enable RXMAC when bringing up a port
>   net: dsa: qca8k: Force CPU port to its highest bandwidth
>   net: dsa: qca8k: Allow overwriting CPU port setting
>   net: dsa: qca8k: Replace GPL boilerplate by SPDX
>   net: dsa: qca8k: Remove redundant parentheses
> 
>  .../devicetree/bindings/net/dsa/qca8k.txt          | 23 +++++++-
>  drivers/net/dsa/qca8k.c                            | 64 ++++++++++++++++++----
>  drivers/net/dsa/qca8k.h                            |  7 ++-
>  3 files changed, 79 insertions(+), 15 deletions(-)
> 

-- 
Florian