Re: BUG: scsi/qla2xxx: BUG_ON(blk_queued_rq(req) is triggered in blk_finish_request

[jianchao.wang]

Hi Himanshu

Thanks god get response from your side finally :)
I get qla2xxx-upstream@xxxxxxxxxx from the maintainer information of driver/scsi/qla2xxx
Looks like it should be modified.

Thanks
Jianchao

On 05/24/2018 12:21 PM, Madhani, Himanshu wrote:
> Hi, 
> 
> Yes. We'll look at this issue. 
> 
> Thanks,
> Himanshu  
> 
>> -----Original Message-----
>> From: jianchao.wang [mailto:jianchao.w.wang@xxxxxxxxxx]
>> Sent: Wednesday, May 23, 2018 6:51 PM
>> To: Dept-Eng QLA2xxx Upstream <qla2xxx-upstream@xxxxxxxxxx>; Madhani,
>> Himanshu <Himanshu.Madhani@xxxxxxxxxx>; jthumshirn@xxxxxxx
>> Cc: linux-scsi@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
>> jejb@xxxxxxxxxxxxxxxxxx; Martin K. Petersen <martin.petersen@xxxxxxxxxx>;
>> Junxiao Bi <junxiao.bi@xxxxxxxxxx>
>> Subject: Re: BUG: scsi/qla2xxx: BUG_ON(blk_queued_rq(req) is triggered in
>> blk_finish_request
>>
>> Would anyone please take a look at this ?
>>
>> Thanks in advance
>> Jianchao
>>
>> On 05/23/2018 11:55 AM, jianchao.wang wrote:
>>>
>>>
>>> Hi all
>>>
>>> Our customer met a panic triggered by BUG_ON in blk_finish_request.
>>> >From the dmesg log, the BUG_ON was triggered after command abort
>> occurred many times.
>>> There is a race condition in the following scenario.
>>>
>>> cpu A                                   cpu B
>>> kworker                                 interrupt
>>>
>>> scmd_eh_abort_handler()
>>>   -> scsi_try_to_abort_cmd()
>>>     -> qla2xxx_eh_abort()
>>>       -> qla2x00_eh_wait_on_command()   qla2x00_status_entry()
>>>                                           -> qla2x00_sp_compl()
>>>                                             -> qla2x00_sp_free_dma()
>>>   -> scsi_queue_insert()
>>>     -> __scsi_queue_insert()
>>>       -> blk_requeue_request()
>>>         -> blk_clear_rq_complete()
>>>                                             -> scsi_done
>>>                                               -> blk_complete_request
>>>                                                 -> blk_mark_rq_complete
>>>           -> elv_requeue_request()              -> __blk_complete_request()
>>>             -> __elv_add_request()
>>>             // req will be queued here
>>>                                                     BLK_SOFTIRQ
>>>                                                     scsi_softirq_done()
>>>                                                       -> scsi_finish_command()
>>>                                                         -> scsi_io_completion()
>>>                                                           -> scsi_end_request()
>>>                                                             -> blk_finish_request()  //
>> BUG_ON(blk_queued_rq(req)) !!!
>>>
>>> The issue will not be triggered most of time, because the request is marked as
>> complete by timeout path.
>>> So the scsi_done from qla2x00_sp_compl does nothing.
>>> But as the scenario above, if the complete state has been cleaned by
>> blk_requeue_request, we will get
>>> the request both requeued and completed, and then
>> BUG_ON(blk_queued_rq(req)) in blk_finish_request comes up.
>>>
>>> Is there any solution for this in qla2xxx driver side ?
>>>
>>> Thanks
>>> Jianchao
>>>
>>>