[PATCH 4.14 000/165] 4.14.44-stable review
From: Greg Kroah-Hartman
Date: Thu May 24 2018 - 06:33:45 EST
This is the start of the stable review cycle for the 4.14.44 release.
There are 165 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sat May 26 09:35:46 UTC 2018.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.44-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Linux 4.14.44-rc1
James Hogan <jhogan@xxxxxxxxxx>
rtc: goldfish: Add missing MODULE_LICENSE
Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
rtc: rp5c01: fix possible race condition
Colin Ian King <colin.king@xxxxxxxxxxxxx>
rtc: tx4939: avoid unintended sign extension on a 24 bit shift
Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
rtc: m41t80: fix race conditions
Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
rtc: rk808: fix possible race condition
Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
rtc: hctosys: Ensure system time doesn't overflow time_t
Bryan O'Donoghue <pure.logic@xxxxxxxxxxxxxxxxx>
rtc: snvs: Fix usage of snvs_rtc_enable
Uwe Kleine-KÃnig <u.kleine-koenig@xxxxxxxxxxxxxx>
serial: altera: ensure port->regshift is honored consistently
Vignesh R <vigneshr@xxxxxx>
serial: 8250: Don't service RX FIFO if interrupts are disabled
Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
serial: arc_uart: Fix out-of-bounds access through DT alias
Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
serial: fsl_lpuart: Fix out-of-bounds access through DT alias
Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
serial: imx: Fix out-of-bounds access through serial port index
Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
serial: mxs-auart: Fix out-of-bounds access through serial port index
Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
serial: samsung: Fix out-of-bounds access through serial port index
Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
serial: sh-sci: Fix out-of-bounds access through DT alias
Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
serial: xuartps: Fix out-of-bounds access through DT alias
Colin Ian King <colin.king@xxxxxxxxxxxxx>
media: cx25821: prevent out-of-bounds read on array card
Hans Verkuil <hverkuil@xxxxxxxxx>
media: vivid: fix incorrect capabilities for radio
Masami Hiramatsu <mhiramat@xxxxxxxxxx>
media: vb2: Fix videobuf2 to map correct area
Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx>
media: i2c: adv748x: fix HDMI field heights
Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
media: v4l: vsp1: Fix display stalls when requesting too many inputs
Brad Love <brad@xxxxxxxxxxxxxxxx>
media: em28xx: Add Hauppauge SoloHD/DualHD bulk models
Brad Love <brad@xxxxxxxxxxxxxxxx>
media: lgdt3306a: Fix a double kfree on i2c device remove
Arnd Bergmann <arnd@xxxxxxxx>
media: s3c-camif: fix out-of-bounds array access
Brad Love <brad@xxxxxxxxxxxxxxxx>
media: cx23885: Set subdev host data to clk_freq pointer
Brad Love <brad@xxxxxxxxxxxxxxxx>
media: cx23885: Override 888 ImpactVCBe crystal frequency
Akinobu Mita <akinobu.mita@xxxxxxxxx>
media: ov5645: add missing of_node_put() in error path
Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
media: Don't let tvp5150_get_vbi() go out of vbi_ram_default array
Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
media: dmxdev: fix error code for invalid ioctls
Andrzej Hajda <a.hajda@xxxxxxxxxxx>
clk: samsung: exynos3250: Fix PLL rates
Andrzej Hajda <a.hajda@xxxxxxxxxxx>
clk: samsung: exynos5250: Fix PLL rates
Andrzej Hajda <a.hajda@xxxxxxxxxxx>
clk: samsung: exynos5433: Fix PLL rates
Andrzej Hajda <a.hajda@xxxxxxxxxxx>
clk: samsung: exynos5260: Fix PLL rates
Andrzej Hajda <a.hajda@xxxxxxxxxxx>
clk: samsung: exynos7: Fix PLL rates
Andrzej Hajda <a.hajda@xxxxxxxxxxx>
clk: samsung: s3c2410: Fix PLL rates
Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
clk: rockchip: Prevent calculating mmc phase if clock rate is zero
Marcel Ziswiler <marcel@xxxxxxxxxxxx>
clk: tegra: Fix pll_u rate configuration
Arnd Bergmann <arnd@xxxxxxxx>
clk: hisilicon: mark wdt_mux_p[] as const
Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
clk: Don't show the incorrect clock phase
Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
clk: rockchip: Fix wrong parent for SDMMC phase clock for rk3228
Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
ASoC: samsung: i2s: Ensure the RCLK rate is properly determined
Ranjani Sridharan <ranjani.sridharan@xxxxxxxxxxxxxxx>
ASoC: topology: create TLV data for dapm widgets
Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
ASoC: samsung: odroid: Fix 32000 sample rate handling
Ezequiel Garcia <ezequiel@xxxxxxxxxxxxxxx>
ASoC: rockchip: rk3288-hdmi-analog: Select needed codecs
Peter Ujfalusi <peter.ujfalusi@xxxxxx>
ASoC: hdmi-codec: Fix module unloading caused kernel crash
James Smart <jsmart2021@xxxxxxxxx>
scsi: lpfc: Fix frequency of Release WQE CQEs
James Smart <jsmart2021@xxxxxxxxx>
scsi: lpfc: Fix soft lockup in lpfc worker thread during LIP testing
James Smart <jsmart2021@xxxxxxxxx>
scsi: lpfc: Fix issue_lip if link is disabled
Wilfried Weissmann <wilfried.weissmann@xxxxxx>
scsi: mvsas: fix wrong endianness of sgpio api
Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
scsi: core: Make SCSI Status CONDITION MET equivalent to GOOD
Dave Carroll <david.carroll@xxxxxxxxxxxxx>
scsi: aacraid: Insure command thread is not recursively stopped
Jianchao Wang <jianchao.w.wang@xxxxxxxxxx>
scsi: iscsi_tcp: set BDI_CAP_STABLE_WRITES when data digest enabled
Jeremy Cline <jeremy@xxxxxxxxxx>
scsi: sd: Keep disk read-only when re-reading partition
Hannes Reinecke <hare@xxxxxxx>
scsi: mpt3sas: Do not mark fw_event workqueue as WQ_MEM_RECLAIM
Manish Rangankar <manish.rangankar@xxxxxxxxxx>
scsi: qedi: Fix kernel crash during port toggle
Hannes Reinecke <hare@xxxxxxx>
scsi: core: return BLK_STS_OK for DID_OK in __scsi_error_from_host_byte()
Manish Rangankar <manish.rangankar@xxxxxxxxxx>
scsi: qla4xxx: skip error recovery in case of register disconnect.
Meelis Roos <mroos@xxxxxxxx>
scsi: aacraid: fix shutdown crash when init fails
Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
scsi: qedi: Fix truncation of CHAP name and secret
Michael Kelley (EOSG) <Michael.H.Kelley@xxxxxxxxxxxxx>
scsi: storvsc: Increase cmd_per_lun for higher speed devices
Bart Van Assche <bart.vanassche@xxxxxxx>
scsi: qla2xxx: Avoid triggering undefined behavior in qla2x00_mbx_completion()
Dan Carpenter <dan.carpenter@xxxxxxxxxx>
scsi: mptfusion: Add bounds check in mptctl_hp_targetinfo()
Dan Carpenter <dan.carpenter@xxxxxxxxxx>
scsi: sym53c8xx_2: iterator underflow in sym_getsync()
Chad Dupuis <chad.dupuis@xxxxxxxxxx>
scsi: bnx2fc: Fix check in SCSI completion handler for timed out request
Sujit Reddy Thumma <sthumma@xxxxxxxxxxxxxx>
scsi: ufs: Enable quirk to ignore sending WRITE_SAME command
Quinn Tran <quinn.tran@xxxxxxxxxx>
scsi: qla2xxx: Fix memory corruption during hba reset test
Tomas Henzl <thenzl@xxxxxxxxxx>
scsi: mpt3sas: fix an out of bound write
Antoine Tenart <antoine.tenart@xxxxxxxxxxx>
crypto: inside-secure - fix the invalidation step during cra_exit
Peter Robinson <pbrobinson@xxxxxxxxx>
crypto: sunxi-ss - Add MODULE_ALIAS to sun4i-ss
Antoine Tenart <antoine.tenart@xxxxxxxxxxx>
crypto: inside-secure - fix the extra cache computation
Antoine Tenart <antoine.tenart@xxxxxxxxxxx>
crypto: inside-secure - fix the cache_len computation
Antoine Tenart <antoine.tenart@xxxxxxxxxxx>
crypto: inside-secure - do not process request if no command was issued
Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
crypto: ccp - don't disable interrupts while setting up debugfs
Antoine Tenart <antoine.tenart@xxxxxxxxxxx>
crypto: atmel-aes - fix the keys zeroing on errors
Antoine Tenart <antoine.tenart@xxxxxxxxxxx>
crypto: inside-secure - wait for the request to complete if in the backlog
NeilBrown <neilb@xxxxxxxx>
staging: lustre: lmv: correctly iput lmo_root
Quytelda Kahja <quytelda@xxxxxxxxxxx>
staging: ks7010: Use constants from ieee80211_eid instead of literal ints.
Colin Ian King <colin.king@xxxxxxxxxxxxx>
staging: rtl8192u: return -ENOMEM on failed allocation of priv->oldaddr
Ioana Radulescu <ruxandra.radulescu@xxxxxxx>
staging: fsl-dpaa2/eth: Fix incorrect casts
NeilBrown <neilb@xxxxxxxx>
staging: lustre: fix bug in osc_enter_cache_try
Kirill Marinushkin <k.marinushkin@xxxxxxxxx>
staging: bcm2835-audio: Release resources on module_exit()
Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
xhci: Show what USB release number the xHC supports from protocol capablity
Larry Finger <Larry.Finger@xxxxxxxxxxxx>
Bluetooth: btusb: Add device ID for RTL8822BE
Brad Love <brad@xxxxxxxxxxxxxxxx>
media: em28xx: USB bulk packet size fix
Brad Love <brad@xxxxxxxxxxxxxxxx>
media: lgdt3306a: Fix module count mismatch on usb unplug
Chris Dickens <christopher.a.dickens@xxxxxxxxx>
usb: gadget: composite: fix incorrect handling of OS desc requests
Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
usb: gadget: udc: change comparison to bitshift when dealing with a mask
Ben Hutchings <ben@xxxxxxxxxxxxxxx>
usbip: Correct maximum value of CONFIG_USBIP_VHCI_HC_PORTS
Lars-Peter Clausen <lars@xxxxxxxxxx>
usb: gadget: ffs: Execute copy_to_user() with USER_DS set
Lars-Peter Clausen <lars@xxxxxxxxxx>
usb: gadget: ffs: Let setup() return USB_GADGET_DELAYED_STATUS
Minas Harutyunyan <hminas@xxxxxxxxxxxx>
usb: dwc2: host: Fix transaction errors in host mode
Minas Harutyunyan <hminas@xxxxxxxxxxxx>
usb: dwc2: hcd: Fix host channel halt flow
Grigor Tovmasyan <Grigor.Tovmasyan@xxxxxxxxxxxx>
usb: dwc2: Fix interval type issue
Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
xhci: zero usb device slot_id member when disabling and freeing a xhci slot
Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
usb: dwc3: Makefile: fix link error on randconfig
Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields
Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
usb: dwc3: Add SoftReset PHY synchonization delay
Nobutaka Okabe <nob77413@xxxxxxxxx>
ALSA: usb-audio: Add native DSD support for Luxman DA-06
Vicente Bergas <vicencb@xxxxxxxxx>
Bluetooth: btusb: Add USB ID 7392:a611 for Edimax EW-7611ULB
Giuseppe Lippolis <giu.lippolis@xxxxxxxxx>
net-usb: add qmi_wwan if on lte modem wistron neweb d18q1
Torsten Hilbrich <torsten.hilbrich@xxxxxxxxxxx>
net/usb/qmi_wwan.c: Add USB id for lt4120 modem
Fredrik Noring <noring@xxxxxxxxxx>
USB: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM
Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
usb: host: xhci-plat: revert "usb: host: xhci-plat: enable clk in resume timing"
Leonard Crestez <leonard.crestez@xxxxxxx>
ARM: dts: imx7d-sdb: Fix regulator-usb-otg2-vbus node name
Eric Dumazet <edumazet@xxxxxxxxxx>
net: usbnet: fix potential deadlock on 32bit hosts
Dominik Bozek <dominikx.bozek@xxxxxxxxx>
usb: cdc_acm: prevent race at write to acm while system resumes
Vardan Mikayelyan <mvardan@xxxxxxxxxxxx>
usb: dwc2: Fix dwc2_hsotg_core_init_disconnected()
Stefan Agner <stefan@xxxxxxxx>
usb: gadget: fsl_udc_core: fix ep valid checks
Manu Gautam <mgautam@xxxxxxxxxxxxxx>
usb: gadget: core: Fix use-after-free of usb_request
Roger Quadros <rogerq@xxxxxx>
usb: dwc3: omap: don't miss events during suspend/resume
Brian Norris <briannorris@xxxxxxxxxxxx>
usb: dwc3: Undo PHY init if soft reset fails
John Keeping <john@xxxxxxxxxxxx>
usb: gadget: f_uac2: fix bFirstInterface in composite gadget
Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
x86/kexec: Avoid double free_page() upon do_kexec_load() failure
Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
hfsplus: stop workqueue when fill_super() failed
Johannes Berg <johannes.berg@xxxxxxxxx>
cfg80211: limit wiphy names to 128 bytes
Omar Sandoval <osandov@xxxxxx>
loop: fix LOOP_GET_STATUS lock imbalance
Omar Sandoval <osandov@xxxxxx>
loop: don't call into filesystem while holding lo_ctl_mutex
Jens Remus <jremus@xxxxxxxxxxxxx>
scsi: zfcp: fix infinite iteration on ERP ready list
Alexander Potapenko <glider@xxxxxxxxxx>
scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()
Jason Yan <yanaijie@xxxxxxxxxx>
scsi: libsas: defer ata device eh commands to libata
Martin Schwidefsky <schwidefsky@xxxxxxxxxx>
s390: use expoline thunks in the BPF JIT
Martin Schwidefsky <schwidefsky@xxxxxxxxxx>
s390: extend expoline to BC instructions
Martin Schwidefsky <schwidefsky@xxxxxxxxxx>
s390: move spectre sysfs attribute code
Martin Schwidefsky <schwidefsky@xxxxxxxxxx>
s390/kernel: use expoline for indirect branches
Martin Schwidefsky <schwidefsky@xxxxxxxxxx>
s390/ftrace: use expoline for indirect branches
Martin Schwidefsky <schwidefsky@xxxxxxxxxx>
s390/lib: use expoline for indirect branches
Martin Schwidefsky <schwidefsky@xxxxxxxxxx>
s390/crc32-vx: use expoline for indirect branches
Martin Schwidefsky <schwidefsky@xxxxxxxxxx>
s390: move expoline assembler macros to a header
Martin Schwidefsky <schwidefsky@xxxxxxxxxx>
s390: add assembler macros for CPU alternatives
Al Viro <viro@xxxxxxxxxxxxxxxxxx>
ext2: fix a block leak
Arvind Yadav <arvind.yadav.cs@xxxxxxxxx>
sparc: vio: use put_device() instead of kfree()
Mohammed Gamal <mgamal@xxxxxxxxxx>
hv_netvsc: Fix net device attach on older Windows hosts
Mohammed Gamal <mgamal@xxxxxxxxxx>
hv_netvsc: Ensure correct teardown message sequence order
Mohammed Gamal <mgamal@xxxxxxxxxx>
hv_netvsc: Split netvsc_revoke_buf() and netvsc_teardown_gpadl()
Mohammed Gamal <mgamal@xxxxxxxxxx>
hv_netvsc: Use Windows version instead of NVSP version on GPAD teardown
Stephen Hemminger <stephen@xxxxxxxxxxxxxxxxxx>
hv_netvsc: common detach logic
Stephen Hemminger <stephen@xxxxxxxxxxxxxxxxxx>
hv_netvsc: change GPAD teardown order on older versions
Stephen Hemminger <stephen@xxxxxxxxxxxxxxxxxx>
hv_netvsc: use RCU to fix concurrent rx and queue changes
Stephen Hemminger <stephen@xxxxxxxxxxxxxxxxxx>
hv_netvsc: disable NAPI before channel close
Stephen Hemminger <stephen@xxxxxxxxxxxxxxxxxx>
hv_netvsc: defer queue selection to VF
Stephen Hemminger <stephen@xxxxxxxxxxxxxxxxxx>
hv_netvsc: fix race in napi poll when rescheduling
Stephen Hemminger <stephen@xxxxxxxxxxxxxxxxxx>
hv_netvsc: cancel subchannel setup before halting device
Stephen Hemminger <stephen@xxxxxxxxxxxxxxxxxx>
hv_netvsc: fix error unwind handling if vmbus_open fails
Stephen Hemminger <stephen@xxxxxxxxxxxxxxxxxx>
hv_netvsc: only wake transmit queue if link is up
Stephen Hemminger <stephen@xxxxxxxxxxxxxxxxxx>
hv_netvsc: avoid retry on send during shutdown
Haiyang Zhang <haiyangz@xxxxxxxxxxxxx>
hv_netvsc: Use the num_online_cpus() for channel limit
Stephen Hemminger <stephen@xxxxxxxxxxxxxxxxxx>
hv_netvsc: empty current transmit aggregation if flow blocked
Vitaly Kuznetsov <vkuznets@xxxxxxxxxx>
hv_netvsc: preserve hw_features on mtu/channels/ringparam changes
Vitaly Kuznetsov <vkuznets@xxxxxxxxxx>
hv_netvsc: netvsc_teardown_gpadl() split
Haiyang Zhang <haiyangz@xxxxxxxxxxxxx>
hv_netvsc: Set tx_table to equal weight after subchannels open
Haiyang Zhang <haiyangz@xxxxxxxxxxxxx>
hv_netvsc: Add initialization of tx_table in netvsc_device_add()
Haiyang Zhang <haiyangz@xxxxxxxxxxxxx>
hv_netvsc: Rename tx_send_table to tx_table
Haiyang Zhang <haiyangz@xxxxxxxxxxxxx>
hv_netvsc: Rename ind_table to rx_table
Haiyang Zhang <haiyangz@xxxxxxxxxxxxx>
hv_netvsc: Fix the real number of queues of non-vRSS cases
hpreg@xxxxxxxxxx <hpreg@xxxxxxxxxx>
vmxnet3: use DMA memory barriers where required
hpreg@xxxxxxxxxx <hpreg@xxxxxxxxxx>
vmxnet3: set the DMA mask before the first DMA map operation
Eric Dumazet <edumazet@xxxxxxxxxx>
tcp: purge write queue in tcp_connect_init()
Eric Dumazet <edumazet@xxxxxxxxxx>
sock_diag: fix use-after-free read in __sk_free
Willem de Bruijn <willemb@xxxxxxxxxx>
packet: in packet_snd start writing at link layer allocation
Willem de Bruijn <willemb@xxxxxxxxxx>
net: test tailroom before appending to linear skb
Eric Biggers <ebiggers@xxxxxxxxxx>
net/smc: check for missing nlattrs in SMC_PNETID messages
Paolo Abeni <pabeni@xxxxxxxxxx>
net: sched: red: avoid hashing NULL child
Davide Caratti <dcaratti@xxxxxxxxxx>
net/sched: fix refcnt leak in the error path of tcf_vlan_init()
Tarick Bedeir <tarick@xxxxxxxxxx>
net/mlx4_core: Fix error handling in mlx4_init_port_info.
Amritha Nambiar <amritha.nambiar@xxxxxxxxx>
net: Fix a bug in removing queues from XPS map
-------------
Diffstat:
Makefile | 4 +-
arch/arm/boot/dts/imx7d-sdb.dts | 2 +-
arch/s390/crypto/crc32be-vx.S | 5 +-
arch/s390/crypto/crc32le-vx.S | 4 +-
arch/s390/include/asm/alternative-asm.h | 108 +++++++
arch/s390/include/asm/nospec-insn.h | 195 +++++++++++++
arch/s390/kernel/Makefile | 1 +
arch/s390/kernel/asm-offsets.c | 1 +
arch/s390/kernel/base.S | 24 +-
arch/s390/kernel/entry.S | 105 ++-----
arch/s390/kernel/mcount.S | 14 +-
arch/s390/kernel/nospec-branch.c | 43 ++-
arch/s390/kernel/nospec-sysfs.c | 21 ++
arch/s390/kernel/reipl.S | 7 +-
arch/s390/kernel/swsusp.S | 10 +-
arch/s390/lib/mem.S | 13 +-
arch/s390/net/bpf_jit.S | 16 +-
arch/s390/net/bpf_jit_comp.c | 63 ++++-
arch/sparc/kernel/vio.c | 2 +-
arch/x86/kernel/machine_kexec_32.c | 6 +-
arch/x86/kernel/machine_kexec_64.c | 5 +-
drivers/block/loop.c | 71 +++--
drivers/bluetooth/btusb.c | 6 +
drivers/clk/clk.c | 3 +
drivers/clk/hisilicon/crg-hi3516cv300.c | 2 +-
drivers/clk/rockchip/clk-mmc-phase.c | 23 ++
drivers/clk/rockchip/clk-rk3228.c | 2 +-
drivers/clk/samsung/clk-exynos3250.c | 4 +-
drivers/clk/samsung/clk-exynos5250.c | 8 +-
drivers/clk/samsung/clk-exynos5260.c | 2 +-
drivers/clk/samsung/clk-exynos5433.c | 12 +-
drivers/clk/samsung/clk-exynos7.c | 2 +-
drivers/clk/samsung/clk-s3c2410.c | 16 +-
drivers/clk/tegra/clk-pll.c | 2 +
drivers/crypto/atmel-aes.c | 2 +-
drivers/crypto/ccp/ccp-debugfs.c | 7 +-
drivers/crypto/inside-secure/safexcel.c | 9 +
drivers/crypto/inside-secure/safexcel_cipher.c | 2 +-
drivers/crypto/inside-secure/safexcel_hash.c | 8 +-
drivers/crypto/sunxi-ss/sun4i-ss-core.c | 1 +
drivers/media/dvb-core/dmxdev.c | 2 +-
drivers/media/dvb-frontends/lgdt3306a.c | 10 +-
drivers/media/i2c/adv748x/adv748x-hdmi.c | 3 +
drivers/media/i2c/ov5645.c | 5 +-
drivers/media/i2c/tvp5150.c | 88 +++---
drivers/media/pci/cx23885/cx23885-cards.c | 4 +
drivers/media/pci/cx23885/cx23885-core.c | 10 +
drivers/media/pci/cx25821/cx25821-core.c | 7 +-
drivers/media/platform/s3c-camif/camif-capture.c | 7 +-
drivers/media/platform/vivid/vivid-ctrls.c | 2 +
drivers/media/platform/vsp1/vsp1_drm.c | 9 +
drivers/media/usb/em28xx/em28xx-cards.c | 22 +-
drivers/media/usb/em28xx/em28xx.h | 2 +-
drivers/media/v4l2-core/videobuf2-vmalloc.c | 2 +-
drivers/message/fusion/mptctl.c | 2 +
drivers/net/ethernet/mellanox/mlx4/main.c | 4 +-
drivers/net/hyperv/hyperv_net.h | 11 +-
drivers/net/hyperv/netvsc.c | 203 ++++++++------
drivers/net/hyperv/netvsc_drv.c | 310 ++++++++++++---------
drivers/net/hyperv/rndis_filter.c | 210 +++++++-------
drivers/net/usb/qmi_wwan.c | 4 +
drivers/net/usb/usbnet.c | 10 +-
drivers/net/vmxnet3/vmxnet3_drv.c | 72 +++--
drivers/rtc/hctosys.c | 5 +
drivers/rtc/rtc-goldfish.c | 2 +
drivers/rtc/rtc-m41t80.c | 18 +-
drivers/rtc/rtc-rk808.c | 14 +-
drivers/rtc/rtc-rp5c01.c | 12 +-
drivers/rtc/rtc-snvs.c | 15 +-
drivers/rtc/rtc-tx4939.c | 6 +-
drivers/s390/scsi/zfcp_dbf.c | 23 +-
drivers/s390/scsi/zfcp_ext.h | 5 +-
drivers/s390/scsi/zfcp_scsi.c | 14 +-
drivers/scsi/aacraid/commsup.c | 4 +-
drivers/scsi/aacraid/linit.c | 5 +-
drivers/scsi/bnx2fc/bnx2fc_io.c | 1 +
drivers/scsi/iscsi_tcp.c | 8 +
drivers/scsi/libsas/sas_scsi_host.c | 33 +--
drivers/scsi/lpfc/lpfc_attr.c | 5 +
drivers/scsi/lpfc/lpfc_hbadisc.c | 5 +-
drivers/scsi/lpfc/lpfc_sli.c | 2 +
drivers/scsi/mpt3sas/mpt3sas_base.c | 5 +-
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 2 +-
drivers/scsi/mvsas/mv_94xx.c | 23 +-
drivers/scsi/qedi/qedi_fw.c | 5 +
drivers/scsi/qedi/qedi_main.c | 24 +-
drivers/scsi/qla2xxx/qla_isr.c | 6 +-
drivers/scsi/qla2xxx/qla_os.c | 2 +
drivers/scsi/qla4xxx/ql4_def.h | 2 +
drivers/scsi/qla4xxx/ql4_os.c | 46 +++
drivers/scsi/scsi_lib.c | 13 +
drivers/scsi/sd.c | 3 +-
drivers/scsi/sg.c | 2 +-
drivers/scsi/storvsc_drv.c | 2 +-
drivers/scsi/sym53c8xx_2/sym_hipd.c | 2 +-
drivers/scsi/ufs/ufshcd.c | 2 +
drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c | 6 +-
drivers/staging/ks7010/ks_hostif.c | 31 +--
drivers/staging/ks7010/ks_hostif.h | 1 +
drivers/staging/lustre/lustre/include/obd.h | 2 +-
drivers/staging/lustre/lustre/lmv/lmv_obd.c | 2 +-
drivers/staging/lustre/lustre/osc/osc_cache.c | 2 +-
drivers/staging/rtl8192u/r8192U_core.c | 2 +
.../staging/vc04_services/bcm2835-audio/bcm2835.c | 54 ++--
drivers/tty/serial/8250/8250_port.c | 3 +-
drivers/tty/serial/altera_uart.c | 12 +-
drivers/tty/serial/arc_uart.c | 5 +
drivers/tty/serial/fsl_lpuart.c | 4 +
drivers/tty/serial/imx.c | 6 +
drivers/tty/serial/mxs-auart.c | 4 +
drivers/tty/serial/samsung.c | 4 +
drivers/tty/serial/sh-sci.c | 4 +
drivers/tty/serial/xilinx_uartps.c | 2 +-
drivers/usb/class/cdc-acm.c | 9 +-
drivers/usb/dwc2/core.h | 2 +-
drivers/usb/dwc2/gadget.c | 12 +-
drivers/usb/dwc2/hcd.c | 32 ++-
drivers/usb/dwc3/Makefile | 2 +-
drivers/usb/dwc3/core.c | 16 +-
drivers/usb/dwc3/core.h | 2 +
drivers/usb/dwc3/dwc3-omap.c | 16 ++
drivers/usb/gadget/composite.c | 40 ++-
drivers/usb/gadget/function/f_fs.c | 6 +-
drivers/usb/gadget/function/f_uac2.c | 2 +
drivers/usb/gadget/udc/core.c | 2 +-
drivers/usb/gadget/udc/fsl_udc_core.c | 4 +-
drivers/usb/gadget/udc/goku_udc.h | 2 +-
drivers/usb/host/ohci-hcd.c | 3 +-
drivers/usb/host/xhci-mem.c | 2 +
drivers/usb/host/xhci-plat.c | 11 +-
drivers/usb/host/xhci.c | 14 +-
drivers/usb/usbip/Kconfig | 2 +-
fs/ext2/inode.c | 10 -
fs/hfsplus/super.c | 1 +
include/linux/u64_stats_sync.h | 22 ++
include/linux/usb/composite.h | 3 +
include/scsi/scsi.h | 2 +
include/uapi/linux/nl80211.h | 2 +
net/core/dev.c | 2 +-
net/core/sock.c | 2 +-
net/ipv4/ip_output.c | 3 +-
net/ipv4/tcp_output.c | 7 +-
net/ipv6/ip6_output.c | 3 +-
net/packet/af_packet.c | 4 +-
net/sched/act_vlan.c | 2 +
net/sched/sch_red.c | 5 +-
net/sched/sch_tbf.c | 5 +-
net/smc/smc_pnet.c | 71 ++---
net/wireless/core.c | 3 +
sound/soc/codecs/hdmi-codec.c | 7 +-
sound/soc/rockchip/Kconfig | 3 +
sound/soc/samsung/i2s.c | 13 +-
sound/soc/samsung/odroid.c | 11 +-
sound/soc/soc-topology.c | 3 +
sound/usb/quirks.c | 29 +-
155 files changed, 1787 insertions(+), 895 deletions(-)