Re: [PATCH V2] PCI/portdrv: do not disable device on reboot/shutdown

[Bjorn Helgaas]

On Wed, May 23, 2018 at 06:57:18PM -0400, Sinan Kaya wrote:
> On 5/23/2018 5:32 PM, Bjorn Helgaas wrote:
> > 
> > The crash seems to indicate that the hpsa device attempted a DMA after
> > we cleared the Root Port's PCI_COMMAND_MASTER, which means
> > hpsa_shutdown() didn't stop DMA from the device (it looks like *most*
> > shutdown methods don't disable device DMA, so it's in good company).
> 
> All drivers are expected to shutdown DMA and interrupts in their shutdown()
> routines. They can skip removing threads, data structures etc. but DMA and
> interrupt disabling are required. This is the difference between shutdown()
> and remove() callbacks.
> 
> If you see that this is not being done in HPSA, then that is where the
> bugfix should be.
> 
> Counter argument is that if shutdown() is not implemented, at least remove()
> should be called. Expecting all drivers to implement shutdown() callbacks
> is just bad by design in my opinion. 
> 
> Code should have fallen back to remove() if shutdown() doesn't exist.
> I can propose a patch for this but this is yet another story to chase.

That sounds like a reasonable idea, and it is definitely another can
of worms.  I looked briefly at some of the .shutdown() cases:

  - device_shutdown() doesn't fall back to remove().

  - It looks like most bus_types don't implement .shutdown() at all (I
    didn't look at them all).

  - Of the bus_types that do implement .shutdown(), most do not fall
    back to .remove().  ps3_system_bus_type() is an example of one
    that *does* fall back to a driver's .remove() if there is no
    .shutdown().

Implement shutdown (no fallback unless indicated):

  ecard_bus_type
  gio_bus_type
  ps3_system_bus_type	# does fallback to remove
  ibmebus_bus_type
  isa_bus_type
  platform_bus_type	# not direct implementation
  fmc_bus_type		# fmc_shutdown() looks spurious
  mipi_dsi_bus_type
  hv_bus

> >> This has been found to cause crashes on HP DL360 Gen9 machines during
> >> reboot. Besides, kexec is already clearing the bus master bit in
> >> pci_device_shutdown() after all PCI drivers are removed.
> > 
> > The original path was:
> > 
> >   pci_device_shutdown(hpsa)
> >     drv->shutdown
> >       hpsa_shutdown                     # hpsa_pci_driver.shutdown
> >   ...
> >   pci_device_shutdown(RP)               # root port
> >     drv->shutdown
> >       pcie_portdrv_remove               # pcie_portdriver.shutdown
> >         pcie_port_device_remove
> >           pci_disable_device
> >             do_pci_disable_device
> >               # clear RP PCI_COMMAND_MASTER
> >     if (kexec)
> >       pci_clear_master(RP)
> >         # clear RP PCI_COMMAND_MASTER
> > 
> > If I understand correctly, the new path after this patch is:
> > 
> >   pci_device_shutdown(hpsa)
> >     drv->shutdown
> >       hpsa_shutdown                     # hpsa_pci_driver.shutdown
> >   ...
> >   pci_device_shutdown(RP)               # root port
> >     drv->shutdown
> >       pcie_portdrv_shutdown             # pcie_portdriver.shutdown
> >         __pcie_portdrv_remove(RP, false)
> >           pcie_port_device_remove(RP, false)
> >             # do NOT clear RP PCI_COMMAND_MASTER
> 
> yup
> 
> >     if (kexec)
> >       pci_clear_master(RP)
> >         # clear RP PCI_COMMAND_MASTER
> > 
> > I guess this patch avoids the panic during reboot because we're not in
> > the kexec path, so we never clear PCI_COMMAND_MASTER for the Root
> > Port, so the hpsa device can DMA happily until the lights go out.
> > 
> > But DMA continuing for some random amount of time before the reboot or
> > shutdown happens makes me a little queasy.  That doesn't sound safe.
> > The more I think about this, the more confused I get.  What am I
> > missing?  
> 
> see above.
> 
> > 
> >> Just remove the extra clear in shutdown path by seperating the remove and
> >> shutdown APIs in the PORTDRV.
> >>
> >>  static pci_ers_result_t pcie_portdrv_error_detected(struct pci_dev *dev,
> >> @@ -218,7 +228,7 @@ static struct pci_driver pcie_portdriver = {
> >>  
> >>  	.probe		= pcie_portdrv_probe,
> >>  	.remove		= pcie_portdrv_remove,
> >> -	.shutdown	= pcie_portdrv_remove,
> >> +	.shutdown	= pcie_portdrv_shutdown,
> > 
> > What are the circumstances when we call .remove() vs .shutdown()?
> > 
> > I guess the main (maybe only) way to call .remove() is to hot-remove
> > the port?  And .shutdown() is basically used in the reboot and kexec
> > paths?
> 
> Correct. shutdown() is only called during reboot/shutdown calls. If you echo
> 1 into the remove file, remove() gets called. Handy for hotplug use cases.
> It needs to be the exact opposite of the probe. It needs to clean up resources
> etc. and have the HW in a state where it can be reinitialized via probe again.
> 
> > 
> >>  	.err_handler	= &pcie_portdrv_err_handler,
> >>  
> >> -- 
> >> 2.7.4
> >>
> > 
> 
> 
> -- 
> Sinan Kaya
> Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
> Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.