[PATCH] clk: qcom: gcc-msm8996: Disable halt check on UFS clocks

[Bjorn Andersson]

The halt check of the UFS symbol clocks always fails, as such probing
UFS after clk_disable_unused always fails. This makes it impossible to
boot a system with the UFS phy or UFS HCD drivers compiled as modules.

Follow SDM845 and disable the halt check on these clocks.

Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
 drivers/clk/qcom/gcc-msm8996.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/clk/qcom/gcc-msm8996.c b/drivers/clk/qcom/gcc-msm8996.c
index 3d6452932797..5f17080c5804 100644
--- a/drivers/clk/qcom/gcc-msm8996.c
+++ b/drivers/clk/qcom/gcc-msm8996.c
@@ -2792,6 +2792,7 @@ static struct clk_branch gcc_ufs_tx_symbol_0_clk = {
 
 static struct clk_branch gcc_ufs_rx_symbol_0_clk = {
 	.halt_reg = 0x7501c,
+	.halt_check = BRANCH_HALT_SKIP,
 	.clkr = {
 		.enable_reg = 0x7501c,
 		.enable_mask = BIT(0),
@@ -2807,6 +2808,7 @@ static struct clk_branch gcc_ufs_rx_symbol_0_clk = {
 
 static struct clk_branch gcc_ufs_rx_symbol_1_clk = {
 	.halt_reg = 0x75020,
+	.halt_check = BRANCH_HALT_SKIP,
 	.clkr = {
 		.enable_reg = 0x75020,
 		.enable_mask = BIT(0),
-- 
2.17.0