RE: [PATCH v2] dcdbas: Add support for WSMT ACPI table

[Douglas.Warzecha]

On 05/16/2018 9:06 AM, Stuart Hayes wrote:
> If the WSMT ACPI table is present and indicates that a fixed communication
> buffer should be used, use the firmware-specified buffer instead of
> allocating a buffer in memory for communications between the dcdbas driver
> and firmare.
> 
> Signed-off-by: Stuart Hayes <stuart.w.hayes@xxxxxxxxx>
> ---
> v2 Bumped driver version to 5.6.0-3.3
> 
> 
>  drivers/firmware/Kconfig  |   2 +-
>  drivers/firmware/dcdbas.c | 102
> +++++++++++++++++++++++++++++++++++++++++++---
>  drivers/firmware/dcdbas.h |  11 +++++
>  3 files changed, 109 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index
> b7c748248e53..a2bd6092bfa1 100644
> --- a/drivers/firmware/Kconfig
> +++ b/drivers/firmware/Kconfig
> @@ -125,7 +125,7 @@ config DELL_RBU
> 
>  config DCDBAS
>  	tristate "Dell Systems Management Base Driver"
> -	depends on X86
> +	depends on X86 && ACPI
>  	help
>  	  The Dell Systems Management Base Driver provides a sysfs
> interface
>  	  for systems management software to perform System
> Management diff --git a/drivers/firmware/dcdbas.c
> b/drivers/firmware/dcdbas.c index 0bdea60c65dd..1699cfdcefe4 100644
> --- a/drivers/firmware/dcdbas.c
> +++ b/drivers/firmware/dcdbas.c
> @@ -36,12 +36,13 @@
>  #include <linux/string.h>
>  #include <linux/types.h>
>  #include <linux/mutex.h>
> +#include <linux/acpi.h>
>  #include <asm/io.h>
> 
>  #include "dcdbas.h"
> 
>  #define DRIVER_NAME		"dcdbas"
> -#define DRIVER_VERSION		"5.6.0-3.2"
> +#define DRIVER_VERSION		"5.6.0-3.3"
>  #define DRIVER_DESCRIPTION	"Dell Systems Management Base Driver"
> 
>  static struct platform_device *dcdbas_pdev; @@ -49,19 +50,23 @@ static
> struct platform_device *dcdbas_pdev;  static u8 *smi_data_buf;  static
> dma_addr_t smi_data_buf_handle;  static unsigned long smi_data_buf_size;
> +static unsigned long max_smi_data_buf_size = MAX_SMI_DATA_BUF_SIZE;
>  static u32 smi_data_buf_phys_addr;
>  static DEFINE_MUTEX(smi_data_lock);
> +static u8 *eps_buffer;
> 
>  static unsigned int host_control_action;  static unsigned int
> host_control_smi_type;  static unsigned int host_control_on_shutdown;
> 
> +static bool wsmt_enabled;
> +
>  /**
>   * smi_data_buf_free: free SMI data buffer
>   */
>  static void smi_data_buf_free(void)
>  {
> -	if (!smi_data_buf)
> +	if (!smi_data_buf || wsmt_enabled)
>  		return;
> 
>  	dev_dbg(&dcdbas_pdev->dev, "%s: phys: %x size: %lu\n", @@ -86,7
> +91,7 @@ static int smi_data_buf_realloc(unsigned long size)
>  	if (smi_data_buf_size >= size)
>  		return 0;
> 
> -	if (size > MAX_SMI_DATA_BUF_SIZE)
> +	if (size > max_smi_data_buf_size)
>  		return -EINVAL;
> 
>  	/* new buffer is needed */
> @@ -169,7 +174,7 @@ static ssize_t smi_data_write(struct file *filp, struct
> kobject *kobj,  {
>  	ssize_t ret;
> 
> -	if ((pos + count) > MAX_SMI_DATA_BUF_SIZE)
> +	if ((pos + count) > max_smi_data_buf_size)
>  		return -EINVAL;
> 
>  	mutex_lock(&smi_data_lock);
> @@ -323,7 +328,8 @@ static ssize_t smi_request_store(struct device *dev,
>  		break;
>  	case 1:
>  		/* Calling Interface SMI */
> -		smi_cmd->ebx = (u32) virt_to_phys(smi_cmd-
> >command_buffer);
> +		smi_cmd->ebx = smi_data_buf_phys_addr
> +				+ offsetof(struct smi_cmd,
> command_buffer);
>  		ret = dcdbas_smi_request(smi_cmd);
>  		if (!ret)
>  			ret = count;
> @@ -482,6 +488,85 @@ static void dcdbas_host_control(void)
>  	}
>  }
> 
> +/* WSMT */
> +
> +static u8 checksum(u8 *buffer, u8 length) {
> +	u8 sum = 0;
> +	u8 *end = buffer + length;
> +
> +	while (buffer < end)
> +		sum = (u8)(sum + *(buffer++));
> +	return sum;
> +}
> +
> +static inline struct smm_eps_table *check_eps_table(u8 *addr) {
> +	struct smm_eps_table *eps = (struct smm_eps_table *)addr;
> +
> +	if (strncmp(SMM_EPS_SIG, eps->smm_comm_buff_anchor, 4) != 0)
> +		return NULL;
> +
> +	if (checksum(addr, eps->length) != 0)
> +		return NULL;
> +
> +	return eps;
> +}
> +
> +static int dcdbas_check_wsmt(void)
> +{
> +	struct acpi_table_wsmt *wsmt = NULL;
> +	struct smm_eps_table *eps = NULL;
> +	u8 *addr;
> +
> +	acpi_get_table(ACPI_SIG_WSMT, 0, (struct acpi_table_header
> **)&wsmt);
> +	if (!wsmt)
> +		return 0;
> +
> +	/* Check if WSMT ACPI table shows that protection is enabled */
> +	if (!(wsmt->protection_flags &
> ACPI_WSMT_FIXED_COMM_BUFFERS)
> +	    || !(wsmt->protection_flags
> +		 &
> ACPI_WSMT_COMM_BUFFER_NESTED_PTR_PROTECTION))
> +		return 0;
> +
> +	/* Scan for EPS (entry point structure) */
> +	for (addr = (u8 *)__va(0xf0000);
> +	     addr < (u8 *)__va(0x100000 - sizeof(struct smm_eps_table)) &&
> !eps;
> +	     addr += 1)
> +		eps = check_eps_table(addr);
> +
> +	if (!eps) {
> +		dev_dbg(&dcdbas_pdev->dev, "found WSMT, but no EPS
> found\n");
> +		return -ENODEV;
> +	}
> +
> +	/*
> +	 * Get physical address of buffer and map to virtual address.
> +	 * Table gives size in 4K pages, regardless of actual system page size.
> +	 */
> +	if (eps->smm_comm_buff_addr + 8 > U32_MAX) {
> +		dev_warn(&dcdbas_pdev->dev, "found WSMT, but EPS
> buffer address is above 4GB\n");
> +		return -EINVAL;
> +	}
> +	eps_buffer = (u8 *)memremap(eps->smm_comm_buff_addr,
> +				     eps->num_of_4k_pages * 4096,
> MEMREMAP_WB);
> +	if (!eps_buffer) {
> +		dev_warn(&dcdbas_pdev->dev, "found WSMT, but failed to
> map EPS buffer\n");
> +		return -ENOMEM;
> +	}
> +
> +	/* First 8 bytes of buffer is for semaphore */
> +	smi_data_buf_phys_addr = (u32) eps->smm_comm_buff_addr + 8;
> +	smi_data_buf = eps_buffer + 8;
> +	smi_data_buf_size = (unsigned long) min(eps->num_of_4k_pages *
> 4096 - 8,
> +			    (u64) ULONG_MAX);
> +	max_smi_data_buf_size = smi_data_buf_size;
> +	wsmt_enabled = true;
> +	dev_info(&dcdbas_pdev->dev,
> +		 "WSMT found, using firmware-provided SMI buffer.\n");
> +	return 1;
> +}
> +
>  /**
>   * dcdbas_reboot_notify: handle reboot notification for host control
>   */
> @@ -548,6 +633,11 @@ static int dcdbas_probe(struct platform_device
> *dev)
> 
>  	dcdbas_pdev = dev;
> 
> +	/* Check if ACPI WSMT table specifies protected SMI buffer address
> */
> +	error = dcdbas_check_wsmt();
> +	if (error < 0)
> +		return error;
> +
>  	/*
>  	 * BIOS SMI calls require buffer addresses be in 32-bit address space.
>  	 * This is done by setting the DMA mask below.
> @@ -635,6 +725,8 @@ static void __exit dcdbas_exit(void)
>  	 */
>  	if (dcdbas_pdev)
>  		smi_data_buf_free();
> +	if (eps_buffer)
> +		memunmap(eps_buffer);
>  	platform_device_unregister(dcdbas_pdev_reg);
>  	platform_driver_unregister(&dcdbas_driver);
>  }
> diff --git a/drivers/firmware/dcdbas.h b/drivers/firmware/dcdbas.h index
> ca3cb0a54ab6..7ea5b3e070b9 100644
> --- a/drivers/firmware/dcdbas.h
> +++ b/drivers/firmware/dcdbas.h
> @@ -54,6 +54,8 @@
> 
>  #define SMI_CMD_MAGIC				(0x534D4931)
> 
> +#define SMM_EPS_SIG				"$SCB"
> +
>  #define DCDBAS_DEV_ATTR_RW(_name) \
>  	DEVICE_ATTR(_name,0600,_name##_show,_name##_store);
> 
> @@ -103,5 +105,14 @@ struct apm_cmd {
> 
>  int dcdbas_smi_request(struct smi_cmd *smi_cmd);
> 
> +struct smm_eps_table {
> +	char smm_comm_buff_anchor[4];
> +	u8 length;
> +	u8 checksum;
> +	u8 version;
> +	u64 smm_comm_buff_addr;
> +	u64 num_of_4k_pages;
> +} __packed;
> +
>  #endif /* _DCDBAS_H_ */
> 
> --
> 2.14.2

Acked-by: Doug Warzecha <douglas_warzecha@xxxxxxxx>