Re: [PATCH v3 6/7] platform/mellanox: Introduce support for Mellanox register access driver

[Greg KH]

On Sun, May 27, 2018 at 03:22:06PM +0000, Vadim Pasternak wrote:
> 
> 
> > -----Original Message-----
> > From: Greg KH [mailto:gregkh@xxxxxxxxxxxxxxxxxxx]
> > Sent: Sunday, May 27, 2018 6:14 PM
> > To: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
> > Cc: dvhart@xxxxxxxxxxxxx; andy.shevchenko@xxxxxxxxx; linux-
> > kernel@xxxxxxxxxxxxxxx; platform-driver-x86@xxxxxxxxxxxxxxx; jiri@xxxxxxxxxxx;
> > Michael Shych <michaelsh@xxxxxxxxxxxx>; ivecera@xxxxxxxxxx
> > Subject: Re: [PATCH v3 6/7] platform/mellanox: Introduce support for Mellanox
> > register access driver
> > 
> > On Sun, May 27, 2018 at 04:47:43PM +0000, Vadim Pasternak wrote:
> > > Introduce new Mellanox platform driver to allow access to Mellanox
> > > programmable device register space trough sysfs interface.
> > > The driver purpose is to provide sysfs interface for user space for
> > > the registers essential for system control and monitoring.
> > > The sets of registers for sysfs access are supposed to be defined per
> > > system type bases and include the registers related to system resets
> > > operation, system reset causes monitoring and some kinds of mux selection.
> > >
> > > Signed-off-by: Vadim Pasternak <vadimp@xxxxxxxxxxxx>
> > > ---
> > > v1->v2:
> > >  Changed added by Vadim:
> > >  - Change ---help--- to help in Kconfig, according to new
> > > requirements;
> > > v2->v3:
> > >  Comments pointed out by Darren:
> > >  - Remove conditional assignment per attribute mode type, because mode
> > >    will guard against not permitted access.
> > >    Verified by Vadim.
> > > ---
> > >  drivers/platform/mellanox/Kconfig     |  11 ++
> > >  drivers/platform/mellanox/Makefile    |   1 +
> > >  drivers/platform/mellanox/mlxreg-io.c | 203
> > > ++++++++++++++++++++++++++++++++++
> > >  3 files changed, 215 insertions(+)
> > >  create mode 100644 drivers/platform/mellanox/mlxreg-io.c
> > >
> > > diff --git a/drivers/platform/mellanox/Kconfig
> > > b/drivers/platform/mellanox/Kconfig
> > > index 591bccd..ddfae9fc 100644
> > > --- a/drivers/platform/mellanox/Kconfig
> > > +++ b/drivers/platform/mellanox/Kconfig
> > > @@ -23,4 +23,15 @@ config MLXREG_HOTPLUG
> > >  	  This driver handles hot-plug events for the power suppliers, power
> > >  	  cables and fans on the wide range Mellanox IB and Ethernet systems.
> > >
> > > +config MLXREG_IO
> > > +	tristate "Mellanox platform register access driver support"
> > > +	depends on REGMAP
> > > +	depends on HWMON
> > > +	help
> > > +	  This driver allows access to Mellanox programmable device register
> > > +	  space trough sysfs interface. The sets of registers for sysfs access
> > > +	  are defined per system type bases and includes the registers related
> > > +	  to system resets operation, system reset causes monitoring and some
> > > +	  kinds of mux selection.
> > 
> > No Documentation/ABI/ entries for these new sysfs files?  Not good :(
> > 
> 
> Thanks Greg for your comment.
> 
> Should I call doc file like:
> Documentation/ABI/stable/sysfs-driver-mlxreg-io
> ?

What ever matches the naming scheme for the driver, yes.

thanks,

greg k-h