[PATCH 1/3] dt-bindings: thermal: Add binding document for SR thermal

[Srinath Mannam]

From: Pramod Kumar <pramod.kumar@xxxxxxxxxxxx>

Add binding document for supported thermal implementation
in Stingray.

Signed-off-by: Pramod Kumar <pramod.kumar@xxxxxxxxxxxx>
Reviewed-by: Ray Jui <ray.jui@xxxxxxxxxxxx>
Reviewed-by: Scott Branden <scott.branden@xxxxxxxxxxxx>
Reviewed-by: Srinath Mannam <srinath.mannam@xxxxxxxxxxxx>
---
 .../bindings/thermal/brcm,sr-thermal.txt           | 45 ++++++++++++++++++++++
 1 file changed, 45 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt

diff --git a/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
new file mode 100644
index 0000000..33f9e11
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
@@ -0,0 +1,45 @@
+* Broadcom Stingray Thermal
+
+This binding describes thermal sensors that is part of Stingray SoCs.
+
+Required properties:
+- compatible : Must be "brcm,sr-thermal"
+- reg : memory where tmon data will be available.
+
+Example:
+	tmons {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		tmon_ihost0: thermal@8f100000 {
+			compatible = "brcm,sr-thermal";
+			reg = <0x8f100000 0x4>;
+		};
+
+		tmon_ihost1: thermal@8f100004 {
+			compatible = "brcm,sr-thermal";
+			reg = <0x8f100004 0x4>;
+		};
+
+		tmon_ihost2: thermal@8f100008 {
+			compatible = "brcm,sr-thermal";
+			reg = <0x8f100008 0x4>;
+		};
+
+		tmon_ihost3: thermal@8f10000c {
+			compatible = "brcm,sr-thermal";
+			reg = <0x8f10000c 0x4>;
+		};
+
+		tmon_crmu: thermal@8f100010 {
+			compatible = "brcm,sr-thermal";
+			reg = <0x8f100010 0x4>;
+		};
+
+		tmon_nitro: thermal@8f100014 {
+			compatible = "brcm,sr-thermal";
+			reg = <0x8f100014 0x4>;
+		};
+	};
-- 
2.7.4