[PATCH 4.16 199/272] phy: rockchip-emmc: retry calpad busy trimming

[Greg Kroah-Hartman]

4.16-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>

[ Upstream commit a4781c2a74b249cad814ceea7272997bbd20051e ]

It turns out that 5us isn't enough for all cases, so let's
retry some more times to wait for caldone.

Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
Tested-by: Ziyuan Xu <xzy.xu@xxxxxxxxxxxxxx>
Signed-off-by: Caesar Wang <wxt@xxxxxxxxxxxxxx>
Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/phy/rockchip/phy-rockchip-emmc.c |   27 +++++++++++++++++----------
 1 file changed, 17 insertions(+), 10 deletions(-)

--- a/drivers/phy/rockchip/phy-rockchip-emmc.c
+++ b/drivers/phy/rockchip/phy-rockchip-emmc.c
@@ -76,6 +76,10 @@
 #define PHYCTRL_OTAPDLYSEL_MASK		0xf
 #define PHYCTRL_OTAPDLYSEL_SHIFT	0x7
 
+#define PHYCTRL_IS_CALDONE(x) \
+	((((x) >> PHYCTRL_CALDONE_SHIFT) & \
+	  PHYCTRL_CALDONE_MASK) == PHYCTRL_CALDONE_DONE)
+
 struct rockchip_emmc_phy {
 	unsigned int	reg_offset;
 	struct regmap	*reg_base;
@@ -90,6 +94,7 @@ static int rockchip_emmc_phy_power(struc
 	unsigned int freqsel = PHYCTRL_FREQSEL_200M;
 	unsigned long rate;
 	unsigned long timeout;
+	int ret;
 
 	/*
 	 * Keep phyctrl_pdb and phyctrl_endll low to allow
@@ -160,17 +165,19 @@ static int rockchip_emmc_phy_power(struc
 				   PHYCTRL_PDB_SHIFT));
 
 	/*
-	 * According to the user manual, it asks driver to
-	 * wait 5us for calpad busy trimming
+	 * According to the user manual, it asks driver to wait 5us for
+	 * calpad busy trimming. However it is documented that this value is
+	 * PVT(A.K.A process,voltage and temperature) relevant, so some
+	 * failure cases are found which indicates we should be more tolerant
+	 * to calpad busy trimming.
 	 */
-	udelay(5);
-	regmap_read(rk_phy->reg_base,
-		    rk_phy->reg_offset + GRF_EMMCPHY_STATUS,
-		    &caldone);
-	caldone = (caldone >> PHYCTRL_CALDONE_SHIFT) & PHYCTRL_CALDONE_MASK;
-	if (caldone != PHYCTRL_CALDONE_DONE) {
-		pr_err("rockchip_emmc_phy_power: caldone timeout.\n");
-		return -ETIMEDOUT;
+	ret = regmap_read_poll_timeout(rk_phy->reg_base,
+				       rk_phy->reg_offset + GRF_EMMCPHY_STATUS,
+				       caldone, PHYCTRL_IS_CALDONE(caldone),
+				       0, 50);
+	if (ret) {
+		pr_err("%s: caldone failed, ret=%d\n", __func__, ret);
+		return ret;
 	}
 
 	/* Set the frequency of the DLL operation */