Re: [PATCH] Documentation: fpga: cleanup

[Randy Dunlap]

On 05/29/2018 10:56 AM, Alan Tull wrote:
> Minor fixes including:
> 
> * fix some typos
> * correct use of a/an
> * rephrase explanation of .state ops function
> * s/re-use/reuse/ (use only one spelling of 'reuse' in these docs)
> * s/cpu/CPU/
> 
> Signed-off-by: Alan Tull <atull@xxxxxxxxxx>

Thanks.  Looks good.
Acked-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>


> ---
>  Documentation/driver-api/fpga/fpga-mgr.rst    | 12 ++++++------
>  Documentation/driver-api/fpga/fpga-region.rst | 12 ++++++------
>  Documentation/driver-api/fpga/intro.rst       | 14 +++++++-------
>  3 files changed, 19 insertions(+), 19 deletions(-)
> 
> diff --git a/Documentation/driver-api/fpga/fpga-mgr.rst b/Documentation/driver-api/fpga/fpga-mgr.rst
> index bcf2dd2..4b3825d 100644
> --- a/Documentation/driver-api/fpga/fpga-mgr.rst
> +++ b/Documentation/driver-api/fpga/fpga-mgr.rst
> @@ -83,7 +83,7 @@ The programming sequence is::
>   3. .write_complete
>  
>  The .write_init function will prepare the FPGA to receive the image data.  The
> -buffer passed into .write_init will be atmost .initial_header_size bytes long,
> +buffer passed into .write_init will be at most .initial_header_size bytes long;
>  if the whole bitstream is not immediately available then the core code will
>  buffer up at least this much before starting.
>  
> @@ -98,9 +98,9 @@ scatter list. This interface is suitable for drivers which use DMA.
>  The .write_complete function is called after all the image has been written
>  to put the FPGA into operating mode.
>  
> -The ops include a .state function which will read the hardware FPGA manager and
> -return a code of type enum fpga_mgr_states.  It doesn't result in a change in
> -hardware state.
> +The ops include a .state function which will determine the state the FPGA is in
> +and return a code of type enum fpga_mgr_states.  It doesn't result in a change
> +in state.
>  
>  How to write an image buffer to a supported FPGA
>  ------------------------------------------------
> @@ -181,8 +181,8 @@ API for implementing a new FPGA Manager driver
>  .. kernel-doc:: drivers/fpga/fpga-mgr.c
>     :functions: fpga_mgr_unregister
>  
> -API for programming a FPGA
> ---------------------------
> +API for programming an FPGA
> +---------------------------
>  
>  .. kernel-doc:: include/linux/fpga/fpga-mgr.h
>     :functions: fpga_image_info
> diff --git a/Documentation/driver-api/fpga/fpga-region.rst b/Documentation/driver-api/fpga/fpga-region.rst
> index f89e4a3..f30333c 100644
> --- a/Documentation/driver-api/fpga/fpga-region.rst
> +++ b/Documentation/driver-api/fpga/fpga-region.rst
> @@ -4,7 +4,7 @@ FPGA Region
>  Overview
>  --------
>  
> -This document is meant to be an brief overview of the FPGA region API usage.  A
> +This document is meant to be a brief overview of the FPGA region API usage.  A
>  more conceptual look at regions can be found in the Device Tree binding
>  document [#f1]_.
>  
> @@ -31,11 +31,11 @@ fpga_image_info including:
>   * pointers to the image as either a scatter-gather buffer, a contiguous
>     buffer, or the name of firmware file
>  
> - * flags indicating specifics such as whether the image if for partial
> + * flags indicating specifics such as whether the image is for partial
>     reconfiguration.
>  
> -How to program a FPGA using a region
> -------------------------------------
> +How to program an FPGA using a region
> +-------------------------------------
>  
>  First, allocate the info struct::
>  
> @@ -77,8 +77,8 @@ An example of usage can be seen in the probe function of [#f2]_.
>  .. [#f1] ../devicetree/bindings/fpga/fpga-region.txt
>  .. [#f2] ../../drivers/fpga/of-fpga-region.c
>  
> -API to program a FGPA
> ----------------------
> +API to program an FPGA
> +----------------------
>  
>  .. kernel-doc:: drivers/fpga/fpga-region.c
>     :functions: fpga_region_program_fpga
> diff --git a/Documentation/driver-api/fpga/intro.rst b/Documentation/driver-api/fpga/intro.rst
> index 51cd81d..50d1cab 100644
> --- a/Documentation/driver-api/fpga/intro.rst
> +++ b/Documentation/driver-api/fpga/intro.rst
> @@ -12,18 +12,18 @@ Linux.  Some of the core intentions of the FPGA subsystems are:
>  
>  * Code should not be shared between upper and lower layers.  This
>    should go without saying.  If that seems necessary, there's probably
> -  framework functionality that that can be added that will benefit
> +  framework functionality that can be added that will benefit
>    other users.  Write the linux-fpga mailing list and maintainers and
>    seek out a solution that expands the framework for broad reuse.
>  
> -* Generally, when adding code, think of the future.  Plan for re-use.
> +* Generally, when adding code, think of the future.  Plan for reuse.
>  
>  The framework in the kernel is divided into:
>  
>  FPGA Manager
>  ------------
>  
> -If you are adding a new FPGA or a new method of programming a FPGA,
> +If you are adding a new FPGA or a new method of programming an FPGA,
>  this is the subsystem for you.  Low level FPGA manager drivers contain
>  the knowledge of how to program a specific device.  This subsystem
>  includes the framework in fpga-mgr.c and the low level drivers that
> @@ -32,10 +32,10 @@ are registered with it.
>  FPGA Bridge
>  -----------
>  
> -FPGA Bridges prevent spurious signals from going out of a FPGA or a
> -region of a FPGA during programming.  They are disabled before
> +FPGA Bridges prevent spurious signals from going out of an FPGA or a
> +region of an FPGA during programming.  They are disabled before
>  programming begins and re-enabled afterwards.  An FPGA bridge may be
> -actual hard hardware that gates a bus to a cpu or a soft ("freeze")
> +actual hard hardware that gates a bus to a CPU or a soft ("freeze")
>  bridge in FPGA fabric that surrounds a partial reconfiguration region
>  of an FPGA.  This subsystem includes fpga-bridge.c and the low level
>  drivers that are registered with it.
> @@ -44,7 +44,7 @@ FPGA Region
>  -----------
>  
>  If you are adding a new interface to the FPGA framework, add it on top
> -of a FPGA region to allow the most reuse of your interface.
> +of an FPGA region to allow the most reuse of your interface.
>  
>  The FPGA Region framework (fpga-region.c) associates managers and
>  bridges as reconfigurable regions.  A region may refer to the whole
> 


-- 
~Randy