Re: [PATCH] hwmon: binding: Fix "#cooling-cells" property's name

[Guenter Roeck]

On Fri, May 25, 2018 at 10:49:57AM +0530, Viresh Kumar wrote:
> It should be "#cooling-cells" instead of "cooling-cells". Fix it.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>

Applied to hwmon-next after updating the subject.

Thanks,
Guenter

> ---
>  Documentation/devicetree/bindings/hwmon/gpio-fan.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt
> index 439a7430fc68..2becdcfdc840 100644
> --- a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt
> +++ b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt
> @@ -11,7 +11,7 @@ Bindings for fan connected to GPIO lines
>    must have the RPM values in ascending order.
>  - alarm-gpios: This pin going active indicates something is wrong with
>    the fan, and a udev event will be fired.
> -- cooling-cells: If used as a cooling device, must be <2>
> +- #cooling-cells: If used as a cooling device, must be <2>
>    Also see: Documentation/devicetree/bindings/thermal/thermal.txt
>    min and max states are derived from the speed-map of the fan.
>  
> -- 
> 2.15.0.194.g9af6a3dea062
>