Re: [PATCH v1 1/2] PCI/AER: Decode Error Source Requester ID

[Bjorn Helgaas]

On Wed, May 30, 2018 at 08:32:41PM +0200, Lukas Wunner wrote:
> On Wed, May 30, 2018 at 12:54:15PM -0500, Bjorn Helgaas wrote:
> >  void aer_print_port_info(struct pci_dev *dev, struct aer_err_info *info)
> >  {
> > -	pci_info(dev, "AER: %s%s error received: id=%04x\n",
> > +	u8 bus = info->id >> 8;
> > +	u8 devfn = info->id & 0xff;
> > +
> > +	pci_info(dev, "AER: %s%s error received: %04x:%02x:%02x.%d\n",
> >  		info->multi_error_valid ? "Multiple " : "",
> > -		aer_error_severity_string[info->severity], info->id);
> > +		aer_error_severity_string[info->severity],
> > +		pci_domain_nr(dev->bus), bus, devfn >> 3, devfn & 0x7);
> 
> I think PCI_SLOT(devfn), PCI_FUNC(devfn) is a bit more readable.

I used those originally, but of course those definitions predate PCIe
so they aren't clearly related to a Requester ID.

I searched the PCIe spec for the specifics of the Requester ID
composition.  It was surprisingly hard to find a clear statement.  The
best I found was PCIe r4.0, sec 6.13, which says

    Routing IDs, Requester IDs, and Completer IDs are 16-bit
    identifiers traditionally composed of three fields: an 8-bit Bus
    Number, a 5-bit Device Number, and a 3-bit Function Number.

Even that isn't specific about where the fields are, 

But it's probably not worth obsessing over this and PCI_SLOT() and
PCI_FUNC() are definitely more readable, so I changed them.