Re: [PATCH v2 0/8] gnss: add new GNSS subsystem

[Johan Hovold]

On Thu, May 31, 2018 at 11:52:18AM +0200, H. Nikolaus Schaller wrote:
> 
> > Am 31.05.2018 um 10:52 schrieb Johan Hovold <johan@xxxxxxxxxx>:
> > 
> > On Wed, May 30, 2018 at 07:38:22AM -0700, Richard Cochran wrote:
> >> On Wed, May 30, 2018 at 12:32:34PM +0200, Johan Hovold wrote:
> >>> Another possible extension is to add generic 1PPS support.
> >> 
> >> There are two possibilities to consider.
> >> 
> >> 1. If the PPS causes an interrupt, then it should hook into the PPS
> >>   subsystem.
> > 
> > Registering a PPS child device is what I had in mind for this.
> 
> This seems to be duplicating functionality that is already solved by
> 
> https://elixir.bootlin.com/linux/v4.17-rc7/source/Documentation/devicetree/bindings/pps/pps-gpio.txt
> 
> and
> 
> https://elixir.bootlin.com/linux/v4.17-rc7/source/drivers/pps/clients/pps-gpio.c
> 
> Or what is bad with just using that?

Using pps-gpio would not allow you to describe the hardware properly,
something which, for example, may be needed for power management (e.g.
to power on the GNSS receiver when the pps device is being accessed).

Johan