Re: [PATCH] clk-si544: Properly round requested frequency to nearest match

[Stephen Boyd]

Quoting Mike Looijmans (2018-05-31 07:03:55)
> The si544 driver had a rounding problem that using the result of clk_round_rate
> may set the clock to yet another rate, for example:
> clk_round_rate(195000000) = 194999999
> clk_round_rate(194999999) = 194999998
> 
> Clients would expect that after clk_set_rate(clk, freq2=clk_round_rate(clk, freq)) the
> chip will be running at exactly freq2.
> 
> The problem was in the calculation of the feedback divider, it was always rounded
> down instead of to the nearest possible VCO value.
> 
> After this change, the following holds true for any supported frequency:
> actual_freq = clk_round_rate(clk, freq);
> clk_set_rate(clk, actual_freq);
> clk_round_rate(clk, actual_freq) == actual_freq && clk_get_rate(clk) == actual_freq
> 
> Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx>
> ---

Applied to clk-next