Re: [PATCH v4 2/6] mfd: bd71837: Devicetree bindings for ROHM BD71837 PMIC

[Stephen Boyd]

Quoting Matti Vaittinen (2018-06-01 03:51:05)
> On Thu, May 31, 2018 at 07:57:53AM -0700, Stephen Boyd wrote:
> > Quoting Rob Herring (2018-05-31 07:07:24)
> > > 
> > > I don't think it should. The h/w either has an interrupt controller or
> > > it doesn't. My concern is you added it but nothing uses it which tells
> > > me your binding is incomplete. I'd rather see complete bindings even
> > > if you don't have drivers. For example, as-is, there's not really any
> > > need for the clocks child node. You can just make the parent a clock
> > > provider. But we need a complete picture of the h/w to make that
> > > determination.
> > > 
> > 
> > I don't see a reason to have the clk subnode either.
> 
> After some pondering - do you mean I could:
> 1. remove clk binfing document and clk node.
> 2. add clock-output-names etc to pmic node (and describe them in pmic
> node binding document)
> 3. use parent DT node in clk driver and do something like:
>         if (parent->of_node)
>                 ret = of_clk_add_hw_provider(parent->of_node, of_clk_hw_simple_get,
>                                              hw);
> 4. remove the clkdev
> 

This sounds ok to me. As Rob said, a more complete picture of the
hardware would make this easier.