[PATCH 4/7] staging: mt7621-pci: add space after comma symbol
From: Abdun Nihaal
Date: Sun Jun 03 2018 - 12:01:28 EST
This patch fixes the following checkpatch error:
ERROR: space required after that ',' (ctx:VxV)
Signed-off-by: Abdun Nihaal <abdun.nihaal@xxxxxxxxx>
---
drivers/staging/mt7621-pci/pci-mt7621.c | 36 ++++++++++++-------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/staging/mt7621-pci/pci-mt7621.c b/drivers/staging/mt7621-pci/pci-mt7621.c
index 28b9a11e9ecb..f347eaf9063c 100644
--- a/drivers/staging/mt7621-pci/pci-mt7621.c
+++ b/drivers/staging/mt7621-pci/pci-mt7621.c
@@ -373,17 +373,17 @@ pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
write_config(0, 0, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
read_config(0, 0, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
printk("BAR0 at slot 0 = %x\n", val);
- printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
+ printk("bus=0x%x, slot = 0x%x\n", dev->bus->number, slot);
} else if ((dev->bus->number == 0) && (slot == 0x1)) {
write_config(0, 1, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
read_config(0, 1, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
printk("BAR0 at slot 1 = %x\n", val);
- printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
+ printk("bus=0x%x, slot = 0x%x\n", dev->bus->number, slot);
} else if ((dev->bus->number == 0) && (slot == 0x2)) {
write_config(0, 2, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE);
read_config(0, 2, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val);
printk("BAR0 at slot 2 = %x\n", val);
- printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
+ printk("bus=0x%x, slot = 0x%x\n", dev->bus->number, slot);
} else if ((dev->bus->number == 1) && (slot == 0x0)) {
switch (pcie_link_status) {
case 2:
@@ -396,7 +396,7 @@ pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
default:
irq = RALINK_INT_PCIE0;
}
- printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
+ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n", dev->bus->number, slot, dev->irq);
} else if ((dev->bus->number == 2) && (slot == 0x0)) {
switch (pcie_link_status) {
case 5:
@@ -406,7 +406,7 @@ pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
default:
irq = RALINK_INT_PCIE1;
}
- printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
+ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n", dev->bus->number, slot, dev->irq);
} else if ((dev->bus->number == 2) && (slot == 0x1)) {
switch (pcie_link_status) {
case 5:
@@ -416,18 +416,18 @@ pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
default:
irq = RALINK_INT_PCIE1;
}
- printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
+ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n", dev->bus->number, slot, dev->irq);
} else if ((dev->bus->number ==3) && (slot == 0x0)) {
irq = RALINK_INT_PCIE2;
- printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
+ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n", dev->bus->number, slot, dev->irq);
} else if ((dev->bus->number ==3) && (slot == 0x1)) {
irq = RALINK_INT_PCIE2;
- printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
+ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n", dev->bus->number, slot, dev->irq);
} else if ((dev->bus->number ==3) && (slot == 0x2)) {
irq = RALINK_INT_PCIE2;
- printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq);
+ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n", dev->bus->number, slot, dev->irq);
} else {
- printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot);
+ printk("bus=0x%x, slot = 0x%x\n", dev->bus->number, slot);
return 0;
}
@@ -501,10 +501,10 @@ set_phy_for_ssc(void)
if (reg >= 6) {
printk("***** Xtal 25MHz *****\n");
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4bc), 4, 2, 0x01); // RG_PE1_H_PLL_FBKSEL //Feedback clock select
- set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x49c), 0,31, 0x18000000); // RG_PE1_H_LCDDS_PCW_NCPO //DDS NCPO PCW (for host mode)
- set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a4), 0,16, 0x18d); // RG_PE1_H_LCDDS_SSC_PRD //DDS SSC dither period control
- set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8), 0,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA //DDS SSC dither amplitude control
- set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8), 16,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA1 //DDS SSC dither amplitude control for initial
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x49c), 0, 31, 0x18000000); // RG_PE1_H_LCDDS_PCW_NCPO //DDS NCPO PCW (for host mode)
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a4), 0, 16, 0x18d); // RG_PE1_H_LCDDS_SSC_PRD //DDS SSC dither period control
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8), 0, 12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA //DDS SSC dither amplitude control
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8), 16, 12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA1 //DDS SSC dither amplitude control for initial
} else {
printk("***** Xtal 20MHz *****\n");
}
@@ -539,10 +539,10 @@ set_phy_for_ssc(void)
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 6, 2, 0x00); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode)
if (reg >= 6) { // 25MHz Xtal
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4bc), 4, 2, 0x01); // RG_PE1_H_PLL_FBKSEL //Feedback clock select
- set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x49c), 0,31, 0x18000000); // RG_PE1_H_LCDDS_PCW_NCPO //DDS NCPO PCW (for host mode)
- set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a4), 0,16, 0x18d); // RG_PE1_H_LCDDS_SSC_PRD //DDS SSC dither period control
- set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8), 0,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA //DDS SSC dither amplitude control
- set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8), 16,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA1 //DDS SSC dither amplitude control for initial
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x49c), 0, 31, 0x18000000); // RG_PE1_H_LCDDS_PCW_NCPO //DDS NCPO PCW (for host mode)
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a4), 0, 16, 0x18d); // RG_PE1_H_LCDDS_SSC_PRD //DDS SSC dither period control
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8), 0, 12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA //DDS SSC dither amplitude control
+ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8), 16, 12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA1 //DDS SSC dither amplitude control for initial
}
}
set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a0), 5, 1, 0x01); // RG_PE1_LCDDS_CLK_PH_INV //DDS clock inversion
--
2.17.0