Re: [PATCH 1/8] media: uniphier: add DT bindings documentation for UniPhier HSC

From: Katsuhiro Suzuki
Date: Sun Jun 03 2018 - 19:50:32 EST


Hello Yamada-san,

Thank you for your review and comments.
I'll fix this mail and other your replies!

Regards,
--
Katsuhiro Suzuki


> -----Original Message-----
> From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
> Sent: Saturday, June 2, 2018 6:50 PM
> To: Suzuki, Katsuhiro/éæ åå <suzuki.katsuhiro@xxxxxxxxxxxxx>
> Cc: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>;
> linux-media@xxxxxxxxxxxxxxx; Masami Hiramatsu <masami.hiramatsu@xxxxxxxxxx>;
> Jassi Brar <jaswinder.singh@xxxxxxxxxx>; linux-arm-kernel
> <linux-arm-kernel@xxxxxxxxxxxxxxxxxxx>; Linux Kernel Mailing List
> <linux-kernel@xxxxxxxxxxxxxxx>
> Subject: Re: [PATCH 1/8] media: uniphier: add DT bindings documentation for UniPhier
> HSC
>
> 2018-05-30 18:09 GMT+09:00 Katsuhiro Suzuki <suzuki.katsuhiro@xxxxxxxxxxxxx>:
> > This patch adds DT binding documentation for UniPhier HSC which is
> > MPEG2-TS input/output and demux subsystem.
> >
> > Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@xxxxxxxxxxxxx>
> > ---
> > .../bindings/media/uniphier,hsc.txt | 38 +++++++++++++++++++
> > 1 file changed, 38 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/media/uniphier,hsc.txt
> >
> > diff --git a/Documentation/devicetree/bindings/media/uniphier,hsc.txt
> b/Documentation/devicetree/bindings/media/uniphier,hsc.txt
> > new file mode 100644
> > index 000000000000..4242483b2ecc
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/uniphier,hsc.txt
> > @@ -0,0 +1,38 @@
> > +Socionext UniPhier HSC (High-speed Stream Controller)
> > +
> > +The Socionext UniPhier HSC subsystem consists of MPEG2-TS input/output and
> > +demultiplexer cores in the same register space.
> > +
> > +This interface is support TS serial signals (clock, valid, sync, data) from
> > +external demodulators.
> > +
> > +Required properties:
> > +- compatible : should be one of the following:
> > + "socionext,uniphier-ld11-hsc"
> > + "socionext,uniphier-ld20-hsc"
> > +- reg : offset and length of the register set for the device.
> > +- interrupts : should contain DMA and TSI error interrupt.
> > +- pinctrl-names : should be "default".
> > +- pinctrl-0 : defined TS serial signal pins for external demodulators.
> > +- clock-names : should include following entries:
>
>
> "the following entries:"
>
>
>
> > + "hsc", "stdmac"
> > +- clocks : a list of phandle, should contain an entry for each
> > + entry in clock-names.
> > +- reset-names : should include following entries:
>
>
> Ditto.
>
>
>
> > + "hsc", "stdmac"
> > +- resets : a list of phandle, should contain an entry for each
> > + entry in reset-names.
> > +
> > +Example:
> > + hsc {
> > + compatible = "socionext,uniphier-ld20-hsc";
> > + reg = <0x5c000000 0x100000>;
> > + interrupts = <0 100 4>, <0 101 4>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_hscin2_s>,
> > + <&pinctrl_hscin3_s>;
> > + clock-names = "stdmac", "hsc";
> > + clocks = <&sys_clk 8>, <&sys_clk 9>;
> > + reset-names = "stdmac", "hsc";
> > + resets = <&sys_rst 8>, <&sys_rst 9>;
> > + };
> > --
> > 2.17.0
> >
>
>
>
> --
> Best Regards
> Masahiro Yamada