Re: [PATCH v2] arm: sun4i: Add support for Pengpod 1000 tablet

[Maxime Ripard]

Hi,

On Sat, Jun 02, 2018 at 05:03:13PM +0100, Bob Ham wrote:
> This is initial support for the Pengpod 1000 tablet.  The display is
> not currently working but the UART, SD card and USB all work fine.
> 
> Signed-off-by: Bob Ham <rah@xxxxxxxxxxxx>
> ---
> Changes since v1:
> 
> * Added SPDX license identifier
> 
> arch/arm/boot/dts/Makefile                   |   1 +
>  arch/arm/boot/dts/sun4i-a10-pengpod-1000.dts | 234 +++++++++++++++++++++++++++
>  2 files changed, 235 insertions(+)
>  create mode 100644 arch/arm/boot/dts/sun4i-a10-pengpod-1000.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index ade7a38543dc..e6e93e7ffc8b 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -893,6 +893,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \
>  	sun4i-a10-olinuxino-lime.dtb \
>  	sun4i-a10-pcduino.dtb \
>  	sun4i-a10-pcduino2.dtb \
> +	sun4i-a10-pengpod-1000.dtb \
>  	sun4i-a10-pov-protab2-ips9.dtb
>  dtb-$(CONFIG_MACH_SUN5I) += \
>  	sun5i-a10s-auxtek-t003.dtb \
> diff --git a/arch/arm/boot/dts/sun4i-a10-pengpod-1000.dts b/arch/arm/boot/dts/sun4i-a10-pengpod-1000.dts
> new file mode 100644
> index 000000000000..788163a80f3a
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun4i-a10-pengpod-1000.dts
> @@ -0,0 +1,234 @@
> +/*
> + * Copyright 2015 Hans de Goede <hdegoede@xxxxxxxxxx>
> + * Copyright 2017 Robert Ham <rah@xxxxxxxxxxxx>
> + *
> + * SPDX-License-Identifier: (GPL-2.0-or-later or X11)

This should be the very first line.

> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This file is distributed in the hope that it will be useful,
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use,
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.

And this is redundant with the SPDX header.

> +/dts-v1/;
> +#include "sun4i-a10.dtsi"
> +#include "sunxi-common-regulators.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/pwm/pwm.h>
> +
> +/ {
> +	model = "PengPod 1000";
> +	compatible = "pengpod,1000", "allwinner,sun4i-a10";
> +
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	backlight: backlight {
> +		compatible = "pwm-backlight";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&bl_en_pin_pengpod1000>;

These two pinctrl property aren't needed.

> +		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
> +		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;

Each step should increase the perceived brightness by roughly 1/Nth, N
being the number of steps. Usually PWM backlights don't work like that.

> +&i2c2 {
> +	status = "okay";
> +
> +	ft5406ee8: touchscreen@38 {
> +		compatible = "edt,edt-ft5406";
> +		reg = <0x38>;
> +		interrupt-parent = <&pio>;
> +		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&touchscreen_pins>;

You can drop these two pinctrl properties as well

> +&pio {
> +	bl_en_pin_pengpod1000: bl_en_pin@0 {
> +		pins = "PH7";
> +		function = "gpio_out";
> +	};
> +
> +	touchscreen_pins: touchscreen_pins@0 {
> +		pins = "PB13";
> +		function = "gpio_out";
> +	};
> +
> +	usb0_id_detect_pin: usb0_id_detect_pin@0 {
> +		pins = "PH4";
> +		function = "gpio_in";
> +		bias-pull-up;
> +	};
> +
> +	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
> +		pins = "PH5";
> +		function = "gpio_in";
> +		bias-pull-down;
> +	};
> +};

And all these nodes.

Thanks!
Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com

Attachment: signature.asc
Description: PGP signature