Re: [PATCH v8 7/8] lib: Add module to simulate atomic sections for testing preemptoff tracers
From: Andy Shevchenko
Date: Wed Jun 06 2018 - 03:48:59 EST
On Tue, 2018-06-05 at 16:53 -0700, Joel Fernandes wrote:
> (Resending since Andy wasn't on CC - sorry)
> Andy, previously made some suggestions to this patch. The updated
> version is
> below and I am planning to send it along with this series as v9. I
> have
> included it in advance below for your Review.
>
> Andy, would you be Ok with adding your Reviewed-by to it?
>
FWIW,
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
P.S. I'm not familiar with the topic so much to have any insights about
implementation, though.
> ---8<-----------------------
>
> From: "Joel Fernandes (Google)" <joel@xxxxxxxxxxxxxxxxx>
> Date: Wed, 16 May 2018 23:46:06 -0700
> Subject: [PATCH v9 7/8] lib: Add module to simulate atomic sections
> for testing
> preemptoff tracers
>
> In this patch we introduce a test module for simulating a long atomic
> section in the kernel which the preemptoff or irqsoff tracers can
> detect. This module is to be used only for test purposes and is
> default
> disabled.
>
> Following is the expected output (only briefly shown) that can be
> parsed
> to verify that the tracers are working correctly. We will use this
> from
> the kselftests in future patches.
>
> For the preemptoff tracer:
>
> echo preemptoff > /d/tracing/current_tracer
> sleep 1
> insmod ./test_atomic_sections.ko atomic_mode=preempt
> atomic_time=500000
> sleep 1
> bash-4.3# cat /d/tracing/trace
> preempt -1066 2...2 0us@: atomic_sect_run <-atomic_sect_run
> preempt -1066 2...2 500002us : atomic_sect_run <-atomic_sect_run
> preempt -1066 2...2 500004us : tracer_preempt_on <-atomic_sect_run
> preempt -1066 2...2 500012us : <stack trace>
> => kthread
> => ret_from_fork
>
> For the irqsoff tracer:
>
> echo irqsoff > /d/tracing/current_tracer
> sleep 1
> insmod ./test_atomic_sections.ko atomic_mode=irq atomic_time=500000
> sleep 1
> bash-4.3# cat /d/tracing/trace
> irq dis -1069 1d..1 0us@: atomic_sect_run
> irq dis -1069 1d..1 500001us : atomic_sect_run
> irq dis -1069 1d..1 500002us : tracer_hardirqs_on <-atomic_sect_run
> irq dis -1069 1d..1 500005us : <stack trace>
> => ret_from_fork
>
> Co-developed-by: Erick Reyes <erickreyes@xxxxxxxxxx>
> Cc: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> Signed-off-by: Joel Fernandes (Google) <joel@xxxxxxxxxxxxxxxxx>
> ---
> lib/Kconfig.debug | 8 ++++
> lib/Makefile | 1 +
> lib/test_atomic_sections.c | 77
> ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 86 insertions(+)
> create mode 100644 lib/test_atomic_sections.c
>
> diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
> index c40c7b734cd1..faebf0fe3bcf 100644
> --- a/lib/Kconfig.debug
> +++ b/lib/Kconfig.debug
> @@ -1933,6 +1933,14 @@ config TEST_KMOD
>
> If unsure, say N.
>
> +config TEST_ATOMIC_SECTIONS
> + tristate "Simulate atomic sections for tracers to detect"
> + depends on m
> + help
> + Select this option to build a test module that can help
> test atomic
> + sections by simulating them with a duration supplied as a
> module
> + parameter. Preempt disable and irq disable modes can be
> requested.
> +
> config TEST_DEBUG_VIRTUAL
> tristate "Test CONFIG_DEBUG_VIRTUAL feature"
> depends on DEBUG_VIRTUAL
> diff --git a/lib/Makefile b/lib/Makefile
> index ce20696d5a92..e82cf5445b7b 100644
> --- a/lib/Makefile
> +++ b/lib/Makefile
> @@ -46,6 +46,7 @@ obj-y += string_helpers.o
> obj-$(CONFIG_TEST_STRING_HELPERS) += test-string_helpers.o
> obj-y += hexdump.o
> obj-$(CONFIG_TEST_HEXDUMP) += test_hexdump.o
> +obj-$(CONFIG_TEST_ATOMIC_SECTIONS) += test_atomic_sections.o
> obj-y += kstrtox.o
> obj-$(CONFIG_FIND_BIT_BENCHMARK) += find_bit_benchmark.o
> obj-$(CONFIG_TEST_BPF) += test_bpf.o
> diff --git a/lib/test_atomic_sections.c b/lib/test_atomic_sections.c
> new file mode 100644
> index 000000000000..1eef518f0974
> --- /dev/null
> +++ b/lib/test_atomic_sections.c
> @@ -0,0 +1,77 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Atomic section emulation test module
> + *
> + * Emulates atomic sections by disabling IRQs or preemption
> + * and doing a busy wait for a specified amount of time.
> + * This can be used for testing of different atomic section
> + * tracers such as irqsoff tracers.
> + *
> + * (c) 2018. Google LLC
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/kernel.h>
> +#include <linux/kthread.h>
> +#include <linux/ktime.h>
> +#include <linux/module.h>
> +#include <linux/printk.h>
> +#include <linux/string.h>
> +
> +static ulong atomic_time = 100;
> +static char atomic_mode[10] = "irq";
> +
> +module_param_named(atomic_time, atomic_time, ulong, S_IRUGO);
> +module_param_string(atomic_mode, atomic_mode, 10, S_IRUGO);
> +MODULE_PARM_DESC(atomic_time, "Period in microseconds (100 uS
> default)");
> +MODULE_PARM_DESC(atomic_mode, "Mode of the test such as preempt or
> irq (default irq)");
> +
> +static void busy_wait(ulong time)
> +{
> + ktime_t start, end;
> + start = ktime_get();
> + do {
> + end = ktime_get();
> + if (kthread_should_stop())
> + break;
> + } while (ktime_to_ns(ktime_sub(end, start)) < (time * 1000));
> +}
> +
> +int atomic_sect_run(void *data)
> +{
> + unsigned long flags;
> +
> + if (!strcmp(atomic_mode, "irq")) {
> + local_irq_save(flags);
> + busy_wait(atomic_time);
> + local_irq_restore(flags);
> + } else if (!strcmp(atomic_mode, "preempt")) {
> + preempt_disable();
> + busy_wait(atomic_time);
> + preempt_enable();
> + }
> +
> + return 0;
> +}
> +
> +static int __init atomic_sect_init(void)
> +{
> + char task_name[50];
> + struct task_struct *test_task;
> +
> + snprintf(task_name, sizeof(task_name), "%s_test",
> atomic_mode);
> +
> + test_task = kthread_run(atomic_sect_run, NULL, task_name);
> + return PTR_ERR_OR_ZERO(test_task);
> +}
> +
> +static void __exit atomic_sect_exit(void)
> +{
> + return;
> +}
> +
> +module_init(atomic_sect_init)
> +module_exit(atomic_sect_exit)
> +MODULE_LICENSE("GPL v2");
--
Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Intel Finland Oy