[PATCH 3.16 172/410] staging: iio: adc: remove the use of CamelCase

From: Ben Hutchings
Date: Thu Jun 07 2018 - 10:53:57 EST


3.16.57-rc1 review patch. If anyone has any objections, please let me know.

------------------

From: Ioana Ciornei <ciorneiioana@xxxxxxxxx>

commit 5f7e280f5ae61450a7aecd9feefe3f032b6a5abf upstream.

Remove the use of CamelCase to follow the kernel naming conventions

Signed-off-by: Ioana Ciornei <ciorneiioana@xxxxxxxxx>
Reviewed-by: Daniel Baluta <daniel.baluta@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
---
drivers/staging/iio/adc/ad7192.c | 10 +++++-----
drivers/staging/iio/adc/ad7192.h | 2 +-
drivers/staging/iio/adc/ad7280a.c | 4 ++--
3 files changed, 8 insertions(+), 8 deletions(-)

--- a/drivers/staging/iio/adc/ad7192.c
+++ b/drivers/staging/iio/adc/ad7192.c
@@ -125,7 +125,7 @@
#define AD7192_GPOCON_P1DAT (1 << 1) /* P1 state */
#define AD7192_GPOCON_P0DAT (1 << 0) /* P0 state */

-#define AD7192_INT_FREQ_MHz 4915200
+#define AD7192_INT_FREQ_MHZ 4915200

/* NOTE:
* The AD7190/2/5 features a dual use data out ready DOUT/RDY output.
@@ -226,14 +226,14 @@ static int ad7192_setup(struct ad7192_st
switch (pdata->clock_source_sel) {
case AD7192_CLK_EXT_MCLK1_2:
case AD7192_CLK_EXT_MCLK2:
- st->mclk = AD7192_INT_FREQ_MHz;
+ st->mclk = AD7192_INT_FREQ_MHZ;
break;
case AD7192_CLK_INT:
case AD7192_CLK_INT_CO:
- if (pdata->ext_clk_Hz)
- st->mclk = pdata->ext_clk_Hz;
+ if (pdata->ext_clk_hz)
+ st->mclk = pdata->ext_clk_hz;
else
- st->mclk = AD7192_INT_FREQ_MHz;
+ st->mclk = AD7192_INT_FREQ_MHZ;
break;
default:
ret = -EINVAL;
--- a/drivers/staging/iio/adc/ad7192.h
+++ b/drivers/staging/iio/adc/ad7192.h
@@ -34,7 +34,7 @@
struct ad7192_platform_data {
u16 vref_mv;
u8 clock_source_sel;
- u32 ext_clk_Hz;
+ u32 ext_clk_hz;
bool refin2_en;
bool rej60_en;
bool sinc3_en;
--- a/drivers/staging/iio/adc/ad7280a.c
+++ b/drivers/staging/iio/adc/ad7280a.c
@@ -89,7 +89,7 @@

#define AD7280A_ALL_CELLS (0xAD << 16)

-#define AD7280A_MAX_SPI_CLK_Hz 700000 /* < 1MHz */
+#define AD7280A_MAX_SPI_CLK_HZ 700000 /* < 1MHz */
#define AD7280A_MAX_CHAIN 8
#define AD7280A_CELLS_PER_DEV 6
#define AD7280A_BITS 12
@@ -850,7 +850,7 @@ static int ad7280_probe(struct spi_devic

ad7280_crc8_build_table(st->crc_tab);

- st->spi->max_speed_hz = AD7280A_MAX_SPI_CLK_Hz;
+ st->spi->max_speed_hz = AD7280A_MAX_SPI_CLK_HZ;
st->spi->mode = SPI_MODE_1;
spi_setup(st->spi);