[PATCH v4 6/6] ARM: dts: tegra: enable NAND flash on Colibri T20
From: Stefan Agner
Date: Mon Jun 11 2018 - 16:53:07 EST
This enables the on-module ONFI conformant NAND flash.
Signed-off-by: Lucas Stach <dev@xxxxxxxxxx>
Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
---
arch/arm/boot/dts/tegra20-colibri-512.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
index 5c202b3e3bb1..0c283fb77214 100644
--- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi
+++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
@@ -462,6 +462,22 @@
};
};
+ nand-controller@70008000 {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ nand-bus-width = <8>;
+ nand-on-flash-bbt;
+ nand-ecc-algo = "bch";
+ nand-is-boot-medium;
+ nand-ecc-maximize;
+ wp-gpios = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>;
+ };
+ };
+
usb@c5004000 {
status = "okay";
nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
--
2.17.1