[PATCH 2/4] ath10k: snoc: stop including pci.h

[Brian Norris]

It's easier to violate abstractions and introduce bugs when snoc.h is
including pci.h. Let's not do that.

I'm not extremely familiar with this driver yet, but several of the
shared PCI/SNOC bits seem to be related to the Copy Engine, so move them
to ce.h.

Signed-off-by: Brian Norris <briannorris@xxxxxxxxxxxx>
---
 drivers/net/wireless/ath/ath10k/ce.h   | 42 ++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/pci.h  | 42 --------------------------
 drivers/net/wireless/ath/ath10k/snoc.h |  1 -
 3 files changed, 42 insertions(+), 43 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/ce.h b/drivers/net/wireless/ath/ath10k/ce.h
index dbeffaef6024..b8fb5382dede 100644
--- a/drivers/net/wireless/ath/ath10k/ce.h
+++ b/drivers/net/wireless/ath/ath10k/ce.h
@@ -383,4 +383,46 @@ static inline u32 ath10k_ce_interrupt_summary(struct ath10k *ar)
 		return CE_INTERRUPT_SUMMARY;
 }
 
+/* Host software's Copy Engine configuration. */
+#define CE_ATTR_FLAGS 0
+
+/*
+ * Configuration information for a Copy Engine pipe.
+ * Passed from Host to Target during startup (one per CE).
+ *
+ * NOTE: Structure is shared between Host software and Target firmware!
+ */
+struct ce_pipe_config {
+	__le32 pipenum;
+	__le32 pipedir;
+	__le32 nentries;
+	__le32 nbytes_max;
+	__le32 flags;
+	__le32 reserved;
+};
+
+/*
+ * Directions for interconnect pipe configuration.
+ * These definitions may be used during configuration and are shared
+ * between Host and Target.
+ *
+ * Pipe Directions are relative to the Host, so PIPEDIR_IN means
+ * "coming IN over air through Target to Host" as with a WiFi Rx operation.
+ * Conversely, PIPEDIR_OUT means "going OUT from Host through Target over air"
+ * as with a WiFi Tx operation. This is somewhat awkward for the "middle-man"
+ * Target since things that are "PIPEDIR_OUT" are coming IN to the Target
+ * over the interconnect.
+ */
+#define PIPEDIR_NONE    0
+#define PIPEDIR_IN      1  /* Target-->Host, WiFi Rx direction */
+#define PIPEDIR_OUT     2  /* Host->Target, WiFi Tx direction */
+#define PIPEDIR_INOUT   3  /* bidirectional */
+
+/* Establish a mapping between a service/direction and a pipe. */
+struct service_to_pipe {
+	__le32 service_id;
+	__le32 pipedir;
+	__le32 pipenum;
+};
+
 #endif /* _CE_H_ */
diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h
index e52fd83156b6..0ed436657108 100644
--- a/drivers/net/wireless/ath/ath10k/pci.h
+++ b/drivers/net/wireless/ath/ath10k/pci.h
@@ -86,48 +86,6 @@ struct pcie_state {
 /* PCIE_CONFIG_FLAG definitions */
 #define PCIE_CONFIG_FLAG_ENABLE_L1  0x0000001
 
-/* Host software's Copy Engine configuration. */
-#define CE_ATTR_FLAGS 0
-
-/*
- * Configuration information for a Copy Engine pipe.
- * Passed from Host to Target during startup (one per CE).
- *
- * NOTE: Structure is shared between Host software and Target firmware!
- */
-struct ce_pipe_config {
-	__le32 pipenum;
-	__le32 pipedir;
-	__le32 nentries;
-	__le32 nbytes_max;
-	__le32 flags;
-	__le32 reserved;
-};
-
-/*
- * Directions for interconnect pipe configuration.
- * These definitions may be used during configuration and are shared
- * between Host and Target.
- *
- * Pipe Directions are relative to the Host, so PIPEDIR_IN means
- * "coming IN over air through Target to Host" as with a WiFi Rx operation.
- * Conversely, PIPEDIR_OUT means "going OUT from Host through Target over air"
- * as with a WiFi Tx operation. This is somewhat awkward for the "middle-man"
- * Target since things that are "PIPEDIR_OUT" are coming IN to the Target
- * over the interconnect.
- */
-#define PIPEDIR_NONE    0
-#define PIPEDIR_IN      1  /* Target-->Host, WiFi Rx direction */
-#define PIPEDIR_OUT     2  /* Host->Target, WiFi Tx direction */
-#define PIPEDIR_INOUT   3  /* bidirectional */
-
-/* Establish a mapping between a service/direction and a pipe. */
-struct service_to_pipe {
-	__le32 service_id;
-	__le32 pipedir;
-	__le32 pipenum;
-};
-
 /* Per-pipe state. */
 struct ath10k_pci_pipe {
 	/* Handle of underlying Copy Engine */
diff --git a/drivers/net/wireless/ath/ath10k/snoc.h b/drivers/net/wireless/ath/ath10k/snoc.h
index 05dc98f46ccd..f9e530189d48 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.h
+++ b/drivers/net/wireless/ath/ath10k/snoc.h
@@ -19,7 +19,6 @@
 
 #include "hw.h"
 #include "ce.h"
-#include "pci.h"
 
 struct ath10k_snoc_drv_priv {
 	enum ath10k_hw_rev hw_rev;
-- 
2.18.0.rc1.242.g61856ae69a-goog